LEDs Stripping Back the BS. Vegging 6 Clones under 22 Watts

This is my newest vegging and work station (non cannabis) using household LEDs and LED T5's (3014's) Total draw of 60 watts.




A bit primitive but it will get the job done....


The little E27's have a couple of blues, 2 x cool white and a warm white in the center...look at that quality Chinese craftsmanship....

Cree ups the ante again


Benchmark CRI for LEDs target ceramic metal halide lighting

The XLamp CXA1304 and CXA1816, the newest members of the CXA LED family, offer 95 CRI options, delivering up to twice the efficacy of equivalent CRI LED light sources. They deliver halogen-like color and combine high quality light with high light output and efficacy.

The CXA1304 LED array is the most compact member of the family, delivering up to 1034-lm in a 6-mm optical source size. The CXA1816 array enables LED replacements for up to 70-W ceramic metal halide in spot lighting or for 2,000-lm downlights with a 12-mm optical source size. The arrays offer 6,000-h of LM-80 data published and are designed to support TM-21 reported L90 lifetime of over four years, at 105°C. They are available in 5,000K through 2,700K CCTs, and deliver a typical CRI of 95 with a typical R9 value of 85 at 3,000K.

http://www.electronicproducts.com/Optoelectronics/LEDs/Benchmark_CRI_for_LEDs_target_ceramic_metal_halide_lighting.aspx

Flip Date to 12/12 was 6/6

First 2 LED tube added 6/19, second 2 on 6/20

So just under 30 days of flower with 92 watts over canopy.

Supplemental light was 2 @ 7 watt SM, then 2 @ 9w Cree, but since 2 weeks ago, one RP 17w Philips + one 22 w RP Utilitech = 39w



2 air stones per bucket Pump is 35 LPM

PetFlora said:

Flip Date to 12/12 was 6/6

First 2 LED tube added 6/19, second 2 on 6/20

So just under 30 days of flower with 92 watts over canopy.

Supplemental light was 2 @ 7 watt SM, then 2 @ 9w Cree, but since 2 weeks ago, one RP 17w Philips + one 22 w RP Utilitech = 39w

View attachment 2725859View attachment 2725860View attachment 2725861

2 air stones per bucket Pump is 35 LPM

View attachment 2725907View attachment 2725908

Click to expand...

What is you PH and PPM? What are you using for nutrients?

PetFlora said:

Chickenwing242

Welcome to thinking outside the box.

Nutes are Hydroponic Research VEG+BLOOM. It's a one step dry formula. Very pH stable

I mix and if needed adjust pH to 5.7. Almost no drift over 7 days, at which point I dump and make fresh nutes

PPMs depends on where I am in the grow. I start ~ 200ppm , increasing weekly to 500 at flip. This grow I will push to 1000, then back down to 200 for final flush

Click to expand...

wow, one step ay? Never heard of them. Website is interesting.

Morning Photos

I shudder to think what these would have looked like had i not checked rez temps yesterday. a few leafs gave it up, but otherwise, all ahead full

The buckets are too small to add a quart btl of ice, so I decided to take each plant out individually and drop a 1/2g ice btl inside for 4-5 minutes. Will repeat as needed.

Since the plants were more camera accessible, I took photos

lovely sativa there PF! what strain is that?

Thanks doc

BrandX seeds (new breeder) It's Woody Haze x White Widow pollinated with BG.

In veg the primary leafs are solid Indica, as the plant matures, new leafs are sat, at least that is the case with their mother. I pollinated 3 of her branches and now have ~ 40 seeds.

Here are same clones under 324w of HOT5 taken 7 days ago

on pics 2 and 4 i saw trichs and its looking real good

PetFlora said:

Thanks doc

BrandX seeds (new breeder) It's Woody Haze x White Widow pollinated with BG.

In veg the primary leafs are solid Indica, as the plant matures, new leas are sat, at least that is the case with their mother. I pollinated 3 of her branches and now have ~ 40 seeds.

Here are same clones under 324w of HOT5 taken 7 days ago

View attachment 2729444View attachment 2729445View attachment 2729446

Click to expand...

Those LEDS make them look like their from another world.

Yet more new LED tech

Boards come in 1, 2 3 rows, snap together

http://www.youtube.com/watch?v=x7BNcm3elIY

i likey dem snap on led lights pF! too bad he don't have more colours like red and blue. mix and match and making your own pattern and designs! I would make diamonds patterns for my diamond shaped plants, cirucular for my circular shaped plants. I could top and train my plants to my own personal light design. If you had lets say a 4 by 4 tent, and had about.. lets say 800 bucks to spend what would you get PetFlora?

those clone shots in the wild colors what lights are on it?

Are you not adding any CO2? Even the Hobo-Grow 2L Bottle would be a good addition, and effective, if you are not...

420Barista said:

those clone shots in the wild colors what lights are on it?

Click to expand...

I guess you missed the last sentence- those pics are plants under my HOT5 bulbs. Plus, I played with color/contrast program

Here are same clones under 324w of HOT5 taken 7 days ago