lighting for a 2x4 closet grow

KlosetKush

Active Member
can someone point me into the direction please?

what I've got: HLG 135w v1 QB 4 inch inline fan and a 4 inch carbon filter

it's good for a 2x2 but I'd like to integrate some good DIY led strip kit or maybe another qb or maybe I should move up to a 250w mh/HPS setup

side question can you get 10000k bulbs for an hos set up for the extra bulk for the last week of flowering or do you have to have a CMH kit?

I'm new to HPS/MH so any advice or info is greatly appreciated

my goal is to pull 6-8 ounces from this 2x5x8 closet
 

Viceman666

Well-Known Member
can someone point me into the direction please?

what I've got: HLG 135w v1 QB 4 inch inline fan and a 4 inch carbon filter

it's good for a 2x2 but I'd like to integrate some good DIY led strip kit or maybe another qb or maybe I should move up to a 250w mh/HPS setup

side question can you get 10000k bulbs for an hos set up for the extra bulk for the last week of flowering or do you have to have a CMH kit?

I'm new to HPS/MH so any advice or info is greatly appreciated

my goal is to pull 6-8 ounces from this 2x5x8 closet
Get yourself about 300w of qb like light like strips,cob, qb, etc..whatever you prefer, fits your budget or else.. and you will blow 6-8oz easy in your 2x4/2x5 space

Since you already have a QB get yourself another one and youll be set, best would be 3 ran with smaller current each but up to you
 

KlosetKush

Active Member
Get yourself about 300w of qb like light like strips,cob, qb, etc..whatever you prefer, fits your budget or else.. and you will blow 6-8oz easy in your 2x4/2x5 space

Since you already have a QB get yourself another one and youll be set, best would be 3 ran with smaller current each but up to you

why run at a lower current? legitimate question
 

Viceman666

Well-Known Member
Imo, 3 would be too many.
Nah 3 at 300-320 would be best and 2 at 260 will be fine but not to the point to have perfect coverage all over the space..
why run at a lower current? legitimate question
because I currently have 4 boards in my 4x4 running at 130w each and I feel id benefit from a little more power.. so half that in a 2x4 (260w) will do but with 3 boards at 100w each you get better spread, more coverage, more efficient.. 3 boards ran at 130w would mean about 400w of QB and would be overshoot for a 2x4 space..
 

churchhaze

Well-Known Member
Nah 3 at 300-320 would be best and 2 at 260 will be fine but not to the point to have perfect coverage all over the space..

because I currently have 4 boards in my 4x4 running at 130w each and I feel id benefit from a little more power.. so half that in a 2x4 (260w) will do but with 3 boards at 100w each you get better spread, more coverage, more efficient.. 3 boards ran at 130w would mean about 400w of QB and would be overshoot for a 2x4 space..
Yeah I missed the part about underdriving. If underdriving, 3 will definitely be better, for all the reasons stated.

He could start out buying 1, then buy another later too.
 

churchhaze

Well-Known Member
I run 240W of 3000k Vero 18 gen 7 in a 2x4 tent, and while I feel like I could use a few more W/sqft of PAR, it'd only be 2-3 more W/sqft. They used to be old veros too and still produced very nicely even before upgrading to gen 7. (basically an upgrade from ~40% to ~50%. (type C driven at 700mA).

edit: taking off yield claims. I honestly don't remember if it's accurate..
 

KlosetKush

Active Member
well I have a 135w v1 qb kit with the 100h-54a driver and I'm wanting to maybe just get another qb288 v1 which I think I aas the same board and run it in series and I should be good
 

goatlicker

Well-Known Member
can someone point me into the direction please?

what I've got: HLG 135w v1 QB 4 inch inline fan and a 4 inch carbon filter

it's good for a 2x2 but I'd like to integrate some good DIY led strip kit or maybe another qb or maybe I should move up to a 250w mh/HPS setup

side question can you get 10000k bulbs for an hos set up for the extra bulk for the last week of flowering or do you have to have a CMH kit?

I'm new to HPS/MH so any advice or info is greatly appreciated

my goal is to pull 6-8 ounces from this 2x5x8 closet
Dude, i pull almost a pound from 1.5x3.5 with a 400w mh/hps..
Have higher expectations haha.
 

Chip_pz

Active Member
Dude, i pull almost a pound from 1.5x3.5 with a 400w mh/hps..
Have higher expectations haha.
How much height u working w?? And how far do u Keep the light from the canopy? I have a 2x4x5 and I want to run a 315cmh but I’m worried abt heat. I had a 600w vipar and was doing good to keep it below 81f during summer months.
 

goatlicker

Well-Known Member
How much height u working w?? And how far do u Keep the light from the canopy? I have a 2x4x5 and I want to run a 315cmh but I’m worried abt heat. I had a 600w vipar and was doing good to keep it below 81f during summer months.
Only around 4ft. 18 inches.
Mine is good for heat with a 200cfm fan and filter.
 

EmeraldØsiris

Well-Known Member
I'd go with 1 qb800 which is 3 ft from Meijiu on Alibaba with the LM301B diodes. Should be around $110-120. Then I'd get 2 Bridgelux blurple 100w COB's from Panda Grow, or 2 100w Vero 29's to fill the extra foot.
 

Dave455

Well-Known Member
can someone point me into the direction please?

what I've got: HLG 135w v1 QB 4 inch inline fan and a 4 inch carbon filter

it's good for a 2x2 but I'd like to integrate some good DIY led strip kit or maybe another qb or maybe I should move up to a 250w mh/HPS setup

side question can you get 10000k bulbs for an hos set up for the extra bulk for the last week of flowering or do you have to have a CMH kit?

I'm new to HPS/MH so any advice or info is greatly appreciated

my goal is to pull 6-8 ounces from this 2x5x8 closet
Get a couple HLG 96 elites and knock out that 2x4
 
Top