SmokinOGkushTrees
Active Member
I'm trying to put three 1000watt lights in my room and an AC and what not... What would be my best way to go about this?? Thanx for the info!!!!!!!
Lighting for my room???
- Thread starter SmokinOGkushTrees
- Start date
SmokinOGkushTrees
Active Member
Ok, now how can we power all this with no problems???
Dan Kone
Well-Known Member
1 light? Yeah, probably not an issue depending what else is on that circuit. If you're trying to run that grow light, a PC with a 750k power supply, and an entertainment system all on the same circuit you might have issues. But as long as everything else that's on it is of low power consumption you should be ok.
Bwpz
Well-Known Member
The OP says 3 1000w lights.
SmokesLikeBob
Well-Known Member
You should dedicate a 20 amp breaker just to the 3 lights...To be on the safe side....
And you'll have to exhaust your room somewhere...
And you'll have to exhaust your room somewhere...
SmokesLikeBob
Well-Known Member
And maybe some pics of the room? Or at least dimensions or something! More info!
Dan Kone
Well-Known Member
Oh, well nvm then. IDK about that then. Depends on the house. 3x ~10 amp lights + an AC unit, ect all on the same breaker might be a bad plan.
SmokesLikeBob
Well-Known Member
Oops, my bad you're gonna need more than a 20 amp...the 3 lights alone are 25 amps.
SmokinOGkushTrees
Active Member
I got everything else under control... What I want to do is make my one bedroom into everything you need... I'm going to have a 6x8 grow tent for flower with two 1000watt lights and off to the side is going to be my veg-clones with another 1000watt light.. Now I wanna know if there is something "I" can do to power this and not call anyone.. DTA I have a few people I can call but once they no the whole world will no and I dont want that... Some people can't keep mouth shut!!!!
SmokinOGkushTrees
Active Member
Is that something you have done b4
Dan Kone
Well-Known Member
You sure you'll need a thowie to veg? Seems excessive for that flowering area.
Dan Kone
Well-Known Member
He's correct. 220 power takes about half the amps. If it's doable, that's the best route for you.
SmokesLikeBob
Well-Known Member
First thing you should do is to figure out the capacity of your breaker box...Then find out which breakers power which sockets and lights.
Then you should calculate how many amps it's gonna take to run ALL your equipment...And determine what you need to do from there, maybe add another breaker. But remember never to exceed the amperage rating of the breaker.
Then you should calculate how many amps it's gonna take to run ALL your equipment...And determine what you need to do from there, maybe add another breaker. But remember never to exceed the amperage rating of the breaker.
Similar threads
