How would i go into this ventilation? Do i just vent out the stuff out of the box into the attic or should i vent it it out of the attic itself cause there is some holes.Well, I think what Abiqua is trying to say is that you may need a lil better ventilation with lights on, but when lights go off, you won't have a major drop of your temps, which is really optimum.
I mean if your temps drop below 10C from your temps with lights on, it's not a good thing!!
Like to start a PC micro grow
- Thread starter pomp124
- Start date
CoolDudeStuff
Active Member
Ok, ventilation in the box is all you need. If you can somehow circulate the air in the attic too, this could be helpful, but not that much..
The most important part is your box.
The most important part is your box.
How would i vent out the air from the box?Ok, ventilation in the box is all you need. If you can somehow circulate the air in the attic too, this could be helpful, but not that much..
The most important part is your box.
CoolDudeStuff
Active Member
Hmm.. A 12 v powered 120mm pc fan should do for exhaust fan. And for intake you'll need two or three holes on the opposite side of the box so the air will come in from there.
I suggest you would put your pc fan somewhere high in your box and make the holes for intake somewhere on the bottom(on the opposite side).
I suggest you would put your pc fan somewhere high in your box and make the holes for intake somewhere on the bottom(on the opposite side).
CoolDudeStuff
Active Member
A pc store!! Nice and cheap!! You'll also need a 12v power supply to strip it's wire and connect the red and black to the red and black of your fan!!
CoolDudeStuff
Active Member
Hey smatz, I wanted to ask.. Did this work out for you?? Did you drop the temps or sthn??
Cheers!!
Cheers!!
CoolDudeStuff
Active Member
Just check out other PC grows around here and you'll see for yourself what fits you and your upcoming grow!
Cheers!
Cheers!