Making Hash Tutorial

motoracer110

Well-Known Member
moto,

I've been doing some edibles. For the brownies I just use a Duncan Hines box mix. I've been sauteing a 1/4 oz of bud in a half cup of vegatable oil to make them. I've also made Nestle's Toll House cookies by cooking a 1/4 oz into 2 sticks of butter.

I've never used any hash in the making of edibles but it sure sounds interesting. How much did you use in your batch of brownies? Also where did you find the coconut oil? I like the flavor of coconut and often times put some shredded coconut in my brownies or cookies.

Did you see that link on the other hash making thread to "Sprunge Bags"? The whole set was $79 shipped. I'd like to hear from some one who's got a set of them so I could get their opinion on them before I order them.

Keep me posted on your efforts in this area. I've got the feeling I'm going to end up with one of those mini-washers myself.

Jack out.
The coco oil was kinda tough to find, I think i got it from either safeway or King soopers. I did a bit of research and found out that the fat content in Coconut oil binds the best to THC and so far out of every edible i have tried I would agree %100 . I found the photos when i made it and was going to make another tutorial but forgot (I used some of the hash from this thread). I have some time on my hands so ill make it now :bigjoint:


Ok First i got a pot of boiling water. Using water helps keep the heat low enough that you will not burn off the THC.



This is the Coco Oil that i was using. Stuff is amazing for this very thing because it is hard at room temp and that is important for separating from the water. I never weighed out the amount of hash that i used but here is what it looked like next to a quarter. I would guess maybe 1-2 grams not sure.



next I added 3 big scoops of coconut oil to the water. not sure the amount but it was about 1/3 the jar. You can use more, but i wanted some super potent stuff :bigjoint:



I then crushed up the hash into little pieces and threw it into the pot. I then cooked it for about 30 min constantly stirring. I was constantly adjusting the heat to make sure it did not boil over so do not leave it alone.



After cooking I added everything to a bowl and placed into the fridge. all the oil will rise to the top with and harden creating a crust leaving the water behind.




Here is the final product. you can easly lift off the coco oil filled with THC :bigjoint:




And finally i cooked all of it into a batch of brownies. All that you do is substitute the oil for whatever butter or margerine that you would normally use in the cooking (you cant tell the difference). you can do this with any type of baking and make some of the best, strongest THC food arround. This batch was the strongest high i have ever experienced (loved It). It made 2 chicks get the spins they were so high off of one little slice and another friend puke because he was so high. I was after potency and deff got it. if you want to get just a little high i would strongly suggest less hash or more oil to dilute it :bigjoint::leaf:
 

motoracer110

Well-Known Member
Ok after i made this coco post I think ill make a separate thread to make it easier for others to find. ill post a link to that as well. Enjoy
 

motoracer110

Well-Known Member
so i did a few more rounds of hash and drying out everything before you extract using the gumby method gets a lot more hash.
 
so i did it.... turned out great... thank you all very much for your advice! Plan on passing this along to my friends, so thank you from many others in advance.
 

youngg692

Member
how much time did you let it in the oven with the light on ? is this the oven light or a light that you had to put it there your self ? i just this this method with 2 qp or more and i have alot so i cant suck out all the water there mayb a lil less then half a inch of water left. i just put it under my 400 hps but any better idea ?
 
what does a mortar bit look like?? can i just stir it by hand really aggressively for like 30 mins?
ive done it by hand, with two bamboo sticks... just make sure you keep dumping in ice as it melts cause it will take quite a while. 30-45 mins.

i probably didnt get as much as i could have...but it still works
 

youngg692

Member
you just go in a home hardware and there alot of things you can use has a mortar. i just did it got 14g out of 2 qp, but it doesent smeel like hash realy and burn weird. and i folowed all the step right. i dont know what i did wrong...
 

Lukeg

New Member
Hey I did mine in about a two and a half gallon with a lid bunch of ice trim with Buds and stuff like that. I then violently shook the entire thing for about 10 minutes. Waiting
 

bird mcbride

Well-Known Member
I can remember when people rolled oil spliffs. One day I decided to crumble the tobacco and crush it in with the oil and smoke it in my pipe instead of the spliff thing. It looked and acted like pressed puddy hash but it was just oil and tobacco. Then one day I got this brilliant Idea, why not crumble up some weed and press that in the oil and smoke that in the pipe. Problem was it left green all over the place and on my fingers too. So I figured I'd boil the bunk with water after the alcohol and boil the water and alcohol mix down together. This boiling the alcohol mix down with the water mix made it so the hash didn't leave green all over the place and gave the hash a better color.

I was pretty wasted when I made that first piece with tobacco. I thought tobacco in the oil spliff...what's the difference ...

Now when a grow is finished every bud and all the eye leaves with frost etc get liquefied in a big grinder after it is completely dry and it gets pressed into this bunk oil while the binder made from the bunk is still hot. The oil is heated to boiling in the water making it crystallized instead of stay green, like oil. If you get oil to hot it ruins it for oil because it turns hard. This is what's wanted for hash though. Keep the volumes of alcohol and water equal during reduction. Keep in mind that alcohol will boil off quicker than water. As it comes to the end, like oil it is set on a low simmer. When the binder makes nice little solid waves with the hair dryer it's about ready for the grind. I just use a big spoon and some other utensils to do the pressing. Some finish it off with rolling pins etc. 1980's Black puddy hash. Home grown buds were the shits so we made hash...oil first.

Anyone that is not experienced in making oil with heat should not attempt making this type of hash because of the use of warmed alcohol, which is highly flammable. Alcohol by itself should never be brought into the boiling state or subjected to open flame, some cooks set alcohol on fire deliberately but they know what they are doing. I boil the alcohol down with the water, with the water set on simmer. It's also a good practice to place a frying pan with water under the pot with the resin mix. that way if it simmers over it will go in the water in the frying pan and not on the heating element.. My self personally would never do this in any building that I intended on keeping :) It's not as complicated as running the still to get the alcohol though. It's always handy to keep a lid handy for the resin pot mix in case of fire. It works the same as a cooking oil fire, shut off the heat source, I'd pull the plug on the extension cord, and put the lid on it.

After all the oil is extracted from the bunk, I burn it. Some times I leave the water and alcohol resin mixes in jugs for weeks before I get around to reducing it. The water resin mix looks like old spent car anti freeze and the alcohol mix looks like new green anti freeze.
 
Top