making thc juice for e cig

1itsme

Well-Known Member
I tried with vg first, also with 50/50 ejuice, both times it worked sorta. but i could never get it to dissolve fully, and the effects were kinda on the weak side. I think pg helps it penetrate your lung tissue better, the effects have been much stronger. also the consistency is like pg (thinner than vg even with @ 70% shatter/30% pg), so it wicks just like ejuice. I've had no issues with separation. waiting on vape reports from a couple friends i gave some to, just want to make shure it works good for them too and it's not just me getting all excited about it. To mix it i heated up the oil till it was fully liquid then dropped in a couple ml of pg and swirled a couple times. that was it. hth


edit: I'm 3 days in on one tank @ 1/2 left. checked the measurement on my pipette, was 1ml to @ just under 2g
 

HeartlandHank

Well-Known Member
Mine's never liquid either. Usually shatter or budder. The micro g pen or 710 mini will work. If you go with the 710pen, make sure you get the atomizer for the mini, because it works a lot better. Here's an off brand version for $30: http://www.ebay.com/itm/The-Best-Wax-Vape-710-Pen-Vaporizer-For-Wax-510-threading-Everything-you-Need-/190931472247?pt=LH_DefaultDomain_0&hash=item2c74670f77

You just put your dab on that wick and it gets super red hot instantly when you push the button = mini dabs.

My buddy likes the micro g style pens (same basic concept), and they come 2 to a pack for under $30: http://www.ebay.com/itm/Micro-G-Pen-Wax-Vaporizer-Gpen-Grenco-Science-NEW-MicroG-Complete-Kit-2-Pens-/131010054751?pt=LH_DefaultDomain_0&hash=item1e80ceca5f

I saw a micro G in action today using co2 extracted hash. It did work. I feel like I can do better than what that individual produced though. I think liquid would make a better hit.

Apparently I'm behind on this sort of knowledge, haha. As I asked questions about this dudes pen and hash he looked at me like I was asking who Michael Jackson was.
 

HeartlandHank

Well-Known Member
happy to see another thread started, this one seems to be going better!!

i fucken need to pick up some PG, thats the ONE thing i havent dipped into yet.


i had no luck mixing even my thinnest bho oil with VG.. vg would seperate, (heat mixing, etc, it separated)

so, i had a non mixed version of VG and oil.. i needed it to be useful.. SO, i gradually added 190 proof everclear to my solution, and slowly, it all started mixing, dissolving.. i got it to be prettyyyy thin at one point, like super juicy, but i thought it was too thin, so i added more oil

what i came up with was a semi thick, but liquidy juice, used about 60% oil, with 20% VG, 20% everclear..
this has been the one for me! i can drip no heat, onto carto, tanks, wicks and i make sure to get a good soak in before sparking up..
I've been taking it out and about, having people test it. its pretty awesome.. I tell people what the ingredients are, and the ones who give consent to smoke it(all) loveee it. My best one lately was with a light weight smoker the other day at the pool hall.. I tend to take about a 10 second hit, hold it for as long as possible, then exhale. that gets me pretty good.. SO, i recommended this lady take a 5 second pull, then exhale immediately after.. She did, no cough, and said it tasted great... about 20 minutes later, her game went down the hole, she was highhhhh..
that was success right there. enjoyable, no cough, high.. oo00, my pen is sexy too :P

my tanks last me over a week. plenty of vape. and i can take one good pull, hold it, and feel like i just took a dab :]

PJ, dab pens are not what we are interested in, E JUICE, key word, JUICE. hash oil aint juice, budder aint juice, wax aint juice. those are made for different smoking devices.

e cigs require a thin form of juice.

you guys, what kind of local stores sell the best propylene glycol ?

Excellent info. Thank you for sharing that.
I know what you mean.. looking through threads on this matter.. none of them really produced solid info, experience, results, etc... I think we are off to a great start here. So far, two solid recipes shared... I'm hoping to have one or two shared soon. Prbly just sort of mix your method and 1itsme.. come up with something that works and see if I can come up with any improvements..

I like the VG + Grain Alcohol as a sub to the PG. Great idea.

My first effort is going to involve this 1/4z of iso hash. This is after a few hours in the freezer.. It was straight goop before the freezer.
I think I am starting to see (from reading replies/threads) that solvent extracted oils do better for this than alcohol... not sure if it is true, but, I'm trying out this iso chunk for my first several attempts

I've always felt like iso hash has a more well rounded high than bho... I have never tried co2 though..
isochunkk_cleaned.jpg

So far my only local source found was Tractor Supply... USP, but not kosher? It is made for some sort of pet medication/food/mixing.. I believe the brand name is "IDEAL". As in.. IDEAL 100% Propylene Glycol U,S,P

I think I can find a better source... might just need to order it if there is a specific product that will be best and I cannot find it local.
 

HeartlandHank

Well-Known Member
I guess I just don't understand why you would want to add glycerine when you can just use a pen on straight hash oil.
I guess the reason is/was.. novelty.. originally. After trying some co2 with a mini g I think I can do better.

I appreciate the info you gave though PJ. Great info. I'm gonna give it a try with a chunk of iso.
 

1itsme

Well-Known Member
theirs also a convenience/stealth thing. I don't need a pen style to vape at home, so the fact that it looks like (is) a regular e cig that you can vape anywhere, is a big +. also 1 tank last like a week, so i can just throw a tank in my pocket along with my e cig, and i'm good.
 

HeartlandHank

Well-Known Member
theirs also a convenience/stealth thing. I don't need a pen style to vape at home, so the fact that it looks like (is) a regular e cig that you can vape anywhere, is a big +. also 1 tank last like a week, so i can just throw a tank in my pocket along with my e cig, and i'm good.
I have seen people say that solvent extracted hash will carry less ganja smell.. making it more stealth than say iso or bubble.

Light on the odor could be a good thing..stealth.
 

HeartlandHank

Well-Known Member
Success!!

Roughly 4 parts propylene glycol to 1 part hash oil. Create a double bubble with a pot, a metail strainer and a shot glass. heat the water to 150 degrees... mix the 4 parts to 1 part in the shot glass. The pan on a gas range lowest setting was a consistent 150 degrees. The hash oil mixed in to the propylene in minutes. NICE!! I love this shit. I've been completely space caked all fucking day, hahaha.
I'll put up a pic tmrw.
 

1itsme

Well-Known Member
i haven't realy noticed any smell from the iso vape. the high is definately alot more clear headed and sneaky than the weed i made it from. I've gotten a little too high on it a few times already bc i didn't realize how baked i was till i got up to do something, so i just kept puffing away :p.
 

HeartlandHank

Well-Known Member
i haven't realy noticed any smell from the iso vape. the high is definately alot more clear headed and sneaky than the weed i made it from. I've gotten a little too high on it a few times already bc i didn't realize how baked i was till i got up to do something, so i just kept puffing away :p.
Yeah man.. about 6 hours after my first batch... i am a little bit too high right now... but, I'm sort of holding it together. haha.. I stress..sort of holding it together. I'm all kinds of giddy right now..

This is prbly my all time favorite high so far... This thc vape juice made with my super silver haze plant is going to be fucking phenomenal.

I'm gonna call it PropJoe Juice..
Prop-Joe.jpg... A proposition for you...
 

1itsme

Well-Known Member
the first night i went to sleep @ 12 and woke up @ 8 still high. i probable ate some on accident tho.
 

1itsme

Well-Known Member
oh yeah with the kosher thing... the usp is the big one. the kosher thing just pretty much guarantees there's independent verification to some degree. I would def not get any made in china tho lol. same for vg.
 

HeartlandHank

Well-Known Member
Grow goddess made a pretty good argument for using pg and oil to make ejuice on another thread. I have tried vg and a 50/50 ejuice and neither one worked very well for me, so i tried pg which seems to work.
I heat up iso oil till its pretty warm and then drop in the pg and swirl it @ a few seconds till its completely dissolved. the ratio i have been using is @ 70/30 oil to pg.
it wicks fine. I have vaped it in a kanger mt3 and mini vivinova on ego style batteries and also in a disposable gas station type that i refilled. I'd say 3-5 good pulls on it is about like a bong hit for me. hth and gl
Yeah man... this was sound advice.. you didn't lead me wrong.. thanks for sharing your experience. Works like a charm.. :weed:
 

HeartlandHank

Well-Known Member
My stuff is quite a bit weaker than yours.. but, I'm gonna make some more tmrw.. I'll try the 30/70 PG/HO..
As long as it wicks... that sounds just right..
 

1itsme

Well-Known Member
it doesn't take much to make it really runny, it kinda surprised me the first time. idk if it needs to be that strong tho.
 

1itsme

Well-Known Member
yeah i'm a little over 1/2 way thru a tank after 4 days. It really surprised me how long it lasts. i gave a friend .7g oil with 1ml and she vaped it in a day but she was smoking out 5 of her friends that got together to study.
 

HeartlandHank

Well-Known Member
Yeah, it really seems like an extremely efficient way to consume hash... .2ml got us ripped.
But, we were taking hot knife hits over a bubbler all morning.
 

HeartlandHank

Well-Known Member
Also, I have to say, I enjoy ISO hash more than the bho. bho kinda feels like diet hash. ISO is more full spectrum, but still clean and clear headed.
Bubble hash at this point just seems silly. haha.

I wonder though...would the PG + heat break down something like some bubble.?
 

1itsme

Well-Known Member
I don't know how efficient it would be, but i think it would work. you'd have to strain out the tricombs. it would be cool to be able to skip the solvents tho.
 
Top