bk78
Well-Known Member
Your leaves are pointing down and plants don’t look happy. I wouldn’t be raising the power of the light at all.
MarsHydro FC-3000 grow
- Thread starter jondamon
- Start date
jondamon
Well-Known Member
I would echo this.
My light height hasn’t moved at all during this grow all I’ve done is adjust power as they grew.
horribleherk
Well-Known Member
My out of control canopy in my 4x4 they grew right into the light lol finally ready to chop this is 480 w of luminus cob I built by hacking a vipar spectra light & installing mea
nwell drivers & luminus cobs
jondamon
Well-Known Member
Thursday update
Gone up to just over 75% on the @MarsHydrofactory FCE-3000.
pistils are starting to form more now another couple of days and we’ll be in to flowering.
Gone up to just over 75% on the @MarsHydrofactory FCE-3000.
pistils are starting to form more now another couple of days and we’ll be in to flowering.
horribleherk
Well-Known Member
That plant is looking nice I'm working on getting a hard floor in my tent then a scrog I've got a little time still
jondamon
Well-Known Member
Last night during reservoir refill I topped up and made the reservoir up in EC to 1.2.
feeds are running every 3 hours during light cycle and every 4 hours during dark cycle.
Light cycle 8pm-8am
Daily this is giving me 5L of runoff from an 8L pot of coco.
each 1 minute feeding gives approx 750ml of runoff.
when I increased my EC the only thing I did was add more of the A/B formula I’m using.
I will try and post more pics later.
I’m done with weaving the plant into the scrog as i want a bit more growth above the screen this time.
plant looks healthy, is growing vigorously and soon I will be trimming up and thinning out the plant a little more as the foliage is very very dense in there AGAIN! Lol.
feeds are running every 3 hours during light cycle and every 4 hours during dark cycle.
Light cycle 8pm-8am
Daily this is giving me 5L of runoff from an 8L pot of coco.
each 1 minute feeding gives approx 750ml of runoff.
when I increased my EC the only thing I did was add more of the A/B formula I’m using.
I will try and post more pics later.
I’m done with weaving the plant into the scrog as i want a bit more growth above the screen this time.
plant looks healthy, is growing vigorously and soon I will be trimming up and thinning out the plant a little more as the foliage is very very dense in there AGAIN! Lol.
jondamon
Well-Known Member
Sunday night update.
picture dump including my walk In closet grow and storage area.
I’ve been thinking about this storage area and during the course of the next few weeks I’m going to remove everything I don’t need in this area.
then I will assess the spacing left and see if I can’t work out what to Do with it even it’s just a small seed starting setup.
How do you like my makeshift intake blocks lol. Bags with elastic bands lol. Does the trick and didn’t cost £15 like I was planning to spend on ducting end caps. Lol.
Temp 25C/22C
my gauge is just out of sight on the right hand side in an ambient area.
RH 45-55% (VPD blah blah blah. I don’t pinpoint VPD before anyone chimes in with it lol)
EC1.2 pH6.0
@MarsHydrofactory
picture dump including my walk In closet grow and storage area.
I’ve been thinking about this storage area and during the course of the next few weeks I’m going to remove everything I don’t need in this area.
then I will assess the spacing left and see if I can’t work out what to Do with it even it’s just a small seed starting setup.
How do you like my makeshift intake blocks lol. Bags with elastic bands lol. Does the trick and didn’t cost £15 like I was planning to spend on ducting end caps. Lol.
Temp 25C/22C
my gauge is just out of sight on the right hand side in an ambient area.
RH 45-55% (VPD blah blah blah. I don’t pinpoint VPD before anyone chimes in with it lol)
EC1.2 pH6.0
@MarsHydrofactory
jondamon
Well-Known Member
Stretching is easing now and plant is filling in very nicely. Not performing any more Tucking etc of the scrog.
even with the @MarsHydrofactory FCE-3000 on around 80% the canopy is still lovely and green without any deficiency symptoms.
EC1.2 pH6.0
Feeding now every 4hours for 1 min flood and feeding once during the dark cycle as I was getting 5L of runoff per day which is a little excessive for an 8L pot.
even with the @MarsHydrofactory FCE-3000 on around 80% the canopy is still lovely and green without any deficiency symptoms.
EC1.2 pH6.0
Feeding now every 4hours for 1 min flood and feeding once during the dark cycle as I was getting 5L of runoff per day which is a little excessive for an 8L pot.
jondamon
Well-Known Member
horribleherk
Well-Known Member
That is a very healthy plant to say the least mars hydro working its mojo
jondamon
Well-Known Member
Approx 3 weeks of 12/12 now under the @MarsHydrofactory FCE-3000.
I’ve increased airflow under the canopy and may or may not strip anything. Not sure yet. Lol.
EC 1.2 pH6
I’ve increased feeding frequency to every 3 hours during lights on as the runoff has been reducing over the last few days and I’d like to achieve a little more. One feed during the dark cycle.
I’ve increased airflow under the canopy and may or may not strip anything. Not sure yet. Lol.
EC 1.2 pH6
I’ve increased feeding frequency to every 3 hours during lights on as the runoff has been reducing over the last few days and I’d like to achieve a little more. One feed during the dark cycle.
itslegalnow
Well-Known Member
Looking good. Hope ur mom is ok
jondamon
Well-Known Member
thanks. She’s a bit bruised And battered, broken Radial bone in her arm/wrist area and taken quite a lot of skin off her nose but a trooper and isn’t moaning about anything and just getting on with it.
horribleherk
Well-Known Member
Hopen your mom is well your grow
is looking nice
jondamon
Well-Known Member
Day 23 of 12/12.
EC 1.2 pH6 every 3 hours during lights on and once during lights off.
@MarsHydrofactory
EC 1.2 pH6 every 3 hours during lights on and once during lights off.
@MarsHydrofactory
