Marshydro led drivers

I've had one driver go out in my led light fixture is a marshydro tsl2000 would any led driver work on this unit or does it have to be a like for like replacement ?

Liamp1603 said:

I've had one driver go out in my led light fixture is a marshydro tsl2000 would any led driver work on this unit or does it have to be a like for like replacement ?

Click to expand...

You can usually find a matching driver from meanwell or inventronics. Could you share a pic of the label with the driver specs?

Liamp1603 said:

I've had one driver go out in my led light fixture is a marshydro tsl2000 would any led driver work on this unit or does it have to be a like for like replacement ?

Click to expand...

What about warranty?

I had a nosey around and found this alternative driver



@Rocket Soul @1212ham

Moflow said:

I had a nosey around and found this alternative driver

TSL2000 Driver replacement

Was just wondering if anyone has replaced a driver on a tsl2000, and if so where did you find one? I can’t seem to find a driver for this light.

support.ilovegrowingmarijuana.com

XLG-150-H-AB | Digi-Key Electronics

Order today, ships today. XLG-150-H-AB – 2.8A 27 ~ 56V Constant Current LED Driver AC DC Converter Topology 1 Output from MEAN WELL USA Inc.. Pricing and Availability on millions of electronic components from Digi-Key Electronics.

www.digikey.co.uk

@Rocket Soul @1212ham

Click to expand...

Thanks they have a Uk link aswell 30 pound for a replacement so I shall be ordering two come the weekend ... seems like it's a common problem with them glad I'm only reveggin plants and growing seedlings and not in flower .... thanks

1212ham said:

What about warranty?

Click to expand...

I have a few Mars Hydro fixtures- I had one driver fall and contacted Mars- they sent me a replacement right away- great customer service- all good since

Moflow said:

I had a nosey around and found this alternative driver

TSL2000 Driver replacement

Was just wondering if anyone has replaced a driver on a tsl2000, and if so where did you find one? I can’t seem to find a driver for this light.

support.ilovegrowingmarijuana.com

XLG-150-H-AB | Digi-Key Electronics

Order today, ships today. XLG-150-H-AB – 2.8A 27 ~ 56V Constant Current LED Driver AC DC Converter Topology 1 Output from MEAN WELL USA Inc.. Pricing and Availability on millions of electronic components from Digi-Key Electronics.

www.digikey.co.uk

@Rocket Soul @1212ham

Click to expand...

That will work but not a great driver match: org driver is 20-41V, and the xlg-h is 27-56V with efficiency dropping off at lower than 80% of 56V, or under 41V. But i still would ask OP for pics cause they sometimes change driver. OP, can you post pics or confirm that its the same driver as the thread quoted by moe?

Liamp1603 said:

I've had one driver go out in my led light fixture is a marshydro tsl2000 would any led driver work on this unit or does it have to be a like for like replacement ?

Click to expand...

Sorry to hear that your power supply is faulty, our lights are with warranty, I suggest you contact our after-sales team at [email protected] and we will help you to solve the problem.

Bud man 43 said:

I have a few Mars Hydro fixtures- I had one driver fall and contacted Mars- they sent me a replacement right away- great customer service- all good since

Click to expand...

thanks， we have FCE6500 Giveaway, if you are interested,please jion us, have fun~

MarsHydrofactory said:

Sorry to hear that your power supply is faulty, our lights are with warranty, I suggest you contact our after-sales team at [email protected] and we will help you to solve the problem.

Click to expand...

I contacted the company I purchased it through and they have told me to fill out a form and they would replace but the strangest thing is I've gone to check the plants today and the right side is working again ...... I'm not sure whether it's cos I have a few electrical items plugged into one socket it draws too much power and shuts down one side .... so I might just buy a compatible driver and have it just incase it happens again in the future thanks tho for everyone's help

Liamp1603 said:

I contacted the company I purchased it through and they have told me to fill out a form and they would replace but the strangest thing is I've gone to check the plants today and the right side is working again ...... I'm not sure whether it's cos I have a few electrical items plugged into one socket it draws too much power and shuts down one side .... so I might just buy a compatible driver and have it just incase it happens again in the future thanks tho for everyone's help

Click to expand...

Mine started doing that before it failed completely-

Bud man 43 said:

Mine started doing that before it failed completely-

Click to expand...

I have spare if it happens again and now I know it has a warranty on the parts if it happens again I will enact it and get replacement fingers crossed it don't ... how long did yours hold out before a full failure ?

Liamp1603 said:

I have spare if it happens again and now I know it has a warranty on the parts if it happens again I will enact it and get replacement fingers crossed it don't ... how long did yours hold out before a full failure ?

Click to expand...

Around 3-4 weeks

Rocket Soul said:

That will work but not a great driver match: org driver is 20-41V, and the xlg-h is 27-56V with efficiency dropping off at lower than 80% of 56V, or under 41V. But i still would ask OP for pics cause they sometimes change driver. OP, can you post pics or confirm that its the same driver as the thread quoted by moe?

Click to expand...

I'm not sure, I think the load axis on the efficiency graph is power, not voltage?
@grothbags ?

BTW, I think an HLG-150H-42AB (or HLG-185H-42AB) would be good if the board is close to 42v. They have higher efficiency and 7 vs 5 year warranty.

1212ham said:

I'm not sure, I think the load axis on the efficiency graph is power, not voltage?
@grothbags ?

BTW, I think an HLG-150H-42AB (or HLG-185H-42AB) would be good if the board is close to 42v. They have higher efficiency and 7 vs 5 year warranty.

Click to expand...

From the lower pic: check the recommended performnce region: for 36V operation the max current (of efficient operation) is 6660mA which gives a 200w power. Over that current operation is less efficient and the driver still has 40w it could give.

Rocket Soul said:

That will work but not a great driver match: org driver is 20-41V, and the xlg-h is 27-56V with efficiency dropping off at lower than 80% of 56V, or under 41V. But i still would ask OP for pics cause they sometimes change driver. OP, can you post pics or confirm that its the same driver as the thread quoted by moe?

Click to expand...

1212ham said:

I'm not sure, I think the load axis on the efficiency graph is power, not voltage?
@grothbags ?

Click to expand...

hmmm... i think the xlg-150-H is fine, the correct graph for the xlg-150-H is -



so as long as each board of the tsl2000 is above 36v it will output the full 150watt with good effeciency.

looking at the mars boards/pcb's it looks like they have 24 parallel strings of 14 x white midpowers in series (not sure what exact diodes mars uses on these?) for 336 diodes per board.

midpowers are classed as 3v chips, newer diodes like the 301b/h ect range from 2.6v ran super soft (@min 10ma) to around 2.95v ran hard (@max 200ma), older lm281b range from 2.75v ran super soft (@min 15ma) to 3.2v ran hard (@max 160ma).

so 14 generic midpowers in series running hard is roughly 42v per board.
we know the moso driver has a max of 41v so they cant be running the diodes as hard at 3v each.
we also know that they are not running them super super soft either at like 2.75v at around 15ma because you would need many more than 336 diodes per board to get the ppfd they claim.

if we take a middle ground of around 2.9v per diode that gives us 40.6v, if we look at the performance region graph of the moso driver we see at around 40v we would have approx 3700ma per board or approx 110ma per diode.



those numbers dont look crazy...

i think the only real advantage of running a hlg-150-h42 over an xlg-150-H is around 1% efficiency at full power and the difference in warranty.