MarsHydro TSW2000/4×4 tent *unboxing & setup thread*

lime73

lime73

Weed Modifier
Well with all the talk about LEDs going around, just thought i would try one of these lights out and see for myself what its all about! :bigjoint:

Have always been curious about LEDs, but really didn't know much about them.
I've seen alot of other peoples results, but only way to truly know, is to try it out myself.

Thank you @MarsHydrofactory for helping me choose a light to go into a 4x4 tent, much appreciated! As I didn't want to spend a fortune to get things rolling, so they helped me choose a model that fit my space and my budget!

Links to MarsHydro products if needed...
US: https://ebay.to/2yrECyO
CA: https://bit.ly/2YuxDzV
UK: https://bit.ly/2YtUFXz
EU: https://bit.ly/34emF4c
AU: https://bit.ly/3fmBFk3

Ordered and received within a week!

20201026_103208.jpg

Will show unboxing in next post. Stay tuned :blsmoke:
 
Last edited:
Cheers bro! I myself have been curious myself about all these myths. I grabbed the set I thought would work for just 1 photoperiod plant.

Mars Hydro TS1000 & Mars Hydro Tent Unboxed & heat tested! Myth? Hmmmmm

I been hearing Mars Hydro's name out there for years.. but just recently I looked into their newer lights. After looking into their New LED boards I wanted to play with one of their set ups.. plus I kinda wanted some of the cool stickers their gear comes with lol. I didn't just want any light...
www.rollitup.org

Heat from the light will not be an issue.
 
Let's begin...

20201028_112549.jpg
noticed a dent in box, hopefully the corners have some extra support in them?
20201028_112623.jpg
phew...it does! Sweet it has a protected foam insert to help protect products! Very nice.
20201028_112715.jpg
look at all the goodies inside! :)
20201028_112933.jpg
manual, dimmer switch/dial, port for diasy chain( hooking up multiple lights in sequence)...very nice !
20201028_112941.jpg
Hygrometer and Temp guage with clock.
20201028_112952.jpg
ratchet straps.
20201028_112955.jpg
power cord, pin type timer, and another cord for diasy chain switch
20201028_112959.jpg
all looks good so far.
20201028_113126.jpg
Side profile of light hood and some cool ass stickers lol
20201028_113339.jpg
Apparently can only upload 10 pics at a time to insert so will have to do another post :bigjoint:
 
Specks on hood, 300w draw from wall.
2.2 umol/j ! :D

20201028_113640.jpg
front view of hood LED's.
20201028_113547.jpg
driver mount with blue film, which i assume i take off , as its just a scratch protector.
20201028_113709.jpg
unscrew pins. Remove film.
20201028_113934.jpg
had to remove side piece (dimmer switch plate) as film is under it?
20201028_114111.jpg
see...
20201028_114120.jpg
Showing piece that was under plate.
20201028_114130.jpg
removed film.
20201028_114154.jpg
Finally can put back together.
20201028_114213.jpg
Thats done! All together with drivers and switch mounted.
20201028_120617.jpg
Which is a really good feature to be able to remove drivers and mount outside of tent if heat is issue inside of tent, drivers can be mounted elsewhere ;) Awesome!

Going to leave it on for now to see the readings i get in tent with drivers installed on hood. Will remount if needed.
 
lime73 said:
We shall see...
For first run i will just be using the one light, if its not up to Par for Flower, in a 4x4, then ill probably just use it to veg with. Or possibly add another one, or even upgrade ;)
Click to expand...

It would veg a 4x4 fine but you need 2 to flower. You could always just make your canopy 3x3 and 1 would be fine.
 
The best of luck in your endeavors I'm going to be hanging out to watch this should be awesome to watch you work as always thank you for your time and all the help that you offer to the people in here
 
You must log in or register to reply here.
Back
Top