Matching Drivers and COBs

yoda954

yoda954

Well-Known Member
Hi friends

I have been looking for just now has a choice of drivers
because I is, remove my tent from 5 X 4 X 3 for 2

I would like to take my 2 drivers HLG-185H-1400B
for moin consomation rather dim and lose effectiveness

I hesitate between HLG320 and HLG240
to feed the 2 panels, each one 4 cxb3590 36v

can you guide me to the choice of drivers and will I have my mounts for parallel panels or online depending on drivers

thank you
 
welight

welight

Well-Known Member
hicpic said:
Unfortunately my setup requires passive cooling and 1400ma is just a bit too much in terms of heat. But for anyone interested sager.com has some.
Click to expand...
we do have stock of 200 watt 1050ma drivers if that works for you, LSD brand
Cheers
Mark
 
U

uszaty

Well-Known Member
hi boys , soon i will have my first cob 3590led light at home the newest bin what i could get from Jerry

i work before on stb led panel , plantphotonic panels ,heliospectra ,

some times ago i have build my 8 modules every each 210 watt on cree led , but it was take a long time to get
solder leds because for every module iv been use 102 diode so total was 8-16 diodes
now i want build COB light , i have 20 cobs at home, still waiting for pin heat sink 120 mm and 70 cm height ,
but i need to order drivers for this job too

so my question is did i took good drivers for my project ?

i want make 5 panels 3 x 250watt , 1 x 150watt and 1 x 100 watt

250 watt
first its should be 250 watt 5 cob 3590 36 v ) with this driver http://www.mouser.ie/Search/ProductDetail.aspx?R=HLG-240H-C1400Bvirtualkey63430000virtualkey709-HLG240H-C1400B

150
second is one -150 w 3 x cob 3590 36 v with this driver http://www.mouser.ie/Search/ProductDetail.aspx?R=HLG-120H-C1400Bvirtualkey63430000virtualkey709-HLG120H-C1400B

and last one

100 w
2 x cob 3590 36 v http://www.mouser.ie/ProductDetail/Mean-Well/LPC-100-1400/?qs=/ha2pyFadujterN2jU4j6V2AezXHSwgKoW2f/vmXTcdKUwaJwmdPdA==

please let me know does my choice is good ?,thanks for help and have a good day boys
 
Last edited:
V

voon

Well-Known Member
Hi .. I would like to contribute little things, which can save some time in decision making and planning structures grossed DIY LED panel .. unfortunately I did not include CreeCXB2530.. Althought now Cutter. com.au is fantastic the money mostly in high 3000K version 90CRI .. I think that the excellent choice ..s even better range and a heavy competitor for 18 vero .. Now a very interesting choice of chips from Citizen ver.5
 

Attachments

E

Enak11

Member
Is there a chart similar that also shows the Hlg240h-c1750b and other 240 meanwell drivers? Thank you for putting this one together
 
U

UrbanHustler

Member
Hmm, but I never heard of them, nor do I know where to buy them. Do you have a link perhaps, 'cause Google is not very co-operative. :P

Nevermind, I figured it out, you mean Citiled. Pfff... But where to buy these?
 
Last edited:
Millsie

Millsie

Well-Known Member
UrbanHustler said:
Hmm, but I never heard of them, nor do I know where to buy them. Do you have a link perhaps, 'cause Google is not very co-operative. :P

Nevermind, I figured it out, you mean Citiled. Pfff... But where to buy these?
Click to expand...
Not sure where is the world you are, however here is a few sites:

http://www.tme.eu/en/details/clu048-1212c4503m2/white-power-leds-cob/citizen/clu048-1212c4-503m2k1/

https://www.cdiweb.com/ProductDetail/CLU0481212C4403H5K2-Citizen-Electronics-Co---Ltd/590975/pid=468

Good luck on your journey :)
 
You must log in or register to reply here.
Top