Mixvent Flow Fan

Cr8z13

Well-Known Member
The idea is to divert the heat away from your grow area. If you do as you suggest, you're only circulating heat. You need to run ducting into a wall, ceiling, or out of a window.
 

blacksnow

Well-Known Member
The idea is to divert the heat away from your grow area. If you do as you suggest, you're only circulating heat. You need to run ducting into a wall, ceiling, or out of a window.
The room the cabinet sits in is quite large...and not sealed off from the rest of the house....it will get plenty of circulation

im just saying if mount that fan i linked in top of my cabinet with exhaust pointing out will it still work well without any ducts hooked up?
 

Cr8z13

Well-Known Member
Where do you think that heat is going to go? It's not going to magically cool before it re-enters your box.
 

specialkayme

Well-Known Member
The fan is really designed to hook ducting up to it. I guess theoretically you could do it the way you planned though.

On a side note, you know you can get it cheaper than on that site you just linked, right?
 

blacksnow

Well-Known Member
The fan is really designed to hook ducting up to it. I guess theoretically you could do it the way you planned though.

On a side note, you know you can get it cheaper than on that site you just linked, right?

Where? I'm having a hard time finding them cheap
 

blacksnow

Well-Known Member
They do sell inline fans, maybe not the one you're looking for, but they're cheaper. You're not going to find a truly quiet fan anyway. Mine is a 6" 174CFM and it's noticeable, albeit not as loud as a bathroom fan.

Well the fan I linked is highly recommended and stated to be a very quiet fan
 

lorenzo08

Well-Known Member
everyone is so hostile.. I work next to a call center department. even they've been talking about it today. I've been in a bad mood lately too, but smoking myself retarded helps
 

blacksnow

Well-Known Member

Thanks! Saved me a fortune!

Guess I'm going with the 100x

I will use duct as well. I will mount the fan ontop my cabinet...run a 4" duct into the top to suck air out, and run a 4" duct off the exhaust side...i will then make a small box for the top of my cabinet to put it all in...obviously ill cut a hole to run the exhaust duct out of
 
Top