Just wanted to get a few ideas I'm pretty strap for floor space and currently I have a 2x4x5 tent and keep my plants around 1.5ft tall, I'm thinking of buying the same tent besides the height there is the same tent which is 7 ft tall I was thinking of splitting it in half so there is 2 X 3.5ft spaces so I vertually have double the floor space and use LED OR COB To control heat what you guys think.
u were actually some fun .......have not thought about this one much .....so thanks for that
1 that u are talking about is alot of weight on the system
A wooden support frame
B gorilla tent (designed for 300lbs of hanging)
C u redo the whole frame work with some electrical steel conduit (use T junctions in it to make 2nd lvl with some plywood resting on it)
2nd is the heat build up and the fresh air/co2 demand
.A the heat from the lower section will be passing up tho the roots of the upper section ....upper section will need a faster intake and exhaust to maintain good grow temps
B your going to need 2 intakes and 2 exhausts .......if u try to wye split a strong fan for lower energy/sound/amps it is very hard to equal out the drawl ...takes thinking and experiments to tune
C Co2 is a heavier gas then oxygen so the lower section will always do better then upper section
D your smell control system (if it matters) u are looking at 2 carbon filters (8-12lbs) inside above the LEDs removing the hot air
ok about the Wye splitting suction power....air will always go the path of least energy to equal out .....so the lengths need to be the same the bends the whole thing to even have a chance of equal suction and with carbon filters on it will always drawl more air tho the one closer to the fan then the other ......so that never works out .....but wyeing after the fans is OK .....u could get away with a strong booster fan 6 inch 240cfms
