my 3 stages of flower

SOMEBEECH

Well-Known Member
We are trying now to get some RIU T-shirts and hoodies.

Il let you guys know i suggested a Thread for Riu to setup a giftshop
Coffee cups,Ts,Hoodies etc.



Beech
 

ringlead3r

Active Member
For your home made e z cloner how important is the water temp to be around 78? does anyone know what temp clones will not root at in the cloner..
 

OLD DUDE

Active Member
For your home made e z cloner how important is the water temp to be around 78? does anyone know what temp clones will not root at in the cloner..
I think the big difference is that with lower temps it takes a bit longer. I run mine at 78 but it is not a must!!!
 

ringlead3r

Active Member
k thats what I thought, but always good to hear from someone else seeing how I use rockwool cubes and I think its a pain in the ass with a heat mat and either over watering or under watering them
 

SOMEBEECH

Well-Known Member
In my experince with my DIY cloner and neoprene inserts is a great improvement from rockwool.
As long as my temps are under 80f works great.
When i have enough roots i just remove and put the tap root thru the mesh pot and cover with with a lid.

I then support the stem by filling in with hydrotron,or just use the slit in my lid.

Beech


TE=ringlead3r;8367860]k thats what I thought, but always good to hear from someone else seeing how I use rockwool cubes and I think its a pain in the ass with a heat mat and either over watering or under watering them[/QUOTE]
 

superstoner1

Well-Known Member
OK, guys. I found the best Xmas gadget that is perfect for a grow. At lowes, for $12, they have these remote controlled power outlets(Xmas lights) that have three outlets and one remote and are great for tasks like emptying a res or anything you need to do. I just bought three more and am going to get them on my ir to wifi connection and will be able to control them via my tablet.
 

zer0ed

Active Member
(just finished building the cloner)

im getting ready to try to build a SS type vegger.
I got the big 50ish gallon hinged hard box.
and im thinking of sitting two of the 27 gallon strong boxes over them.
im thinking of building some kind of frame to sit the 27 gallon boxes on.
and maybe trying to do maybe some kind of large ebb and flow drain that i can have the pvc sprayer pipe run up though the drain?
I need to go back to the begining of the thread to see if you said exactly how you did it.

Any advice before i start?
 

OLD DUDE

Active Member
(just finished building the cloner)

im getting ready to try to build a SS type vegger.
I got the big 50ish gallon hinged hard box.
and im thinking of sitting two of the 27 gallon strong boxes over them.
im thinking of building some kind of frame to sit the 27 gallon boxes on.
and maybe trying to do maybe some kind of large ebb and flow drain that i can have the pvc sprayer pipe run up though the drain?
I need to go back to the begining of the thread to see if you said exactly how you did it.

Any advice before i start?
You really do not need the bigger tote for the vegger, save it for flower!! I personally have never needed more than the original 27 gallons of nutes for veg!! If you plan on vegging for 4-6 weeks than sure, use it!
 

zer0ed

Active Member
You really do not need the bigger tote for the vegger, save it for flower!! I personally have never needed more than the original 27 gallons of nutes for veg!! If you plan on vegging for 4-6 weeks than sure, use it!
thanks for looking out,
Ill follow your advice.

Im going to build a 5' x 5' x 6' tent for flower.
i wonder if fitting that 50gal. box in the tent will be a problem.
unless i build some ingenious system, to get the water in, and out and have the rez sit outside. . .
 

superstoner1

Well-Known Member
One of the few times I will disagree with old dude. I went to the large igloo cooler, about 35gal, but it will be replaced with 50gal smart bin next remodel.I am doing longer veg cycle though and more plants and remodel will include adding a fourth flower system.
 
Top