My Babies

Stonedz

Well-Known Member
Nice stonedz.....Deffinetely some pix of pistils mixed up in there. Seen a few sacks to but thats cool. Least U shall see bud! Looking good bro. Pimptastic!
Lol yea i saw that after, i didnt take pics of a couple of them cause they're so dense, i couldnt get the camera in there lol. How long does it take for the ballz to pop you think? cause i wanna get them out before they do lol. Luckily the ones that are yellowing, look like they're males, so fuck em lol.

Pimptastic indeed sir! This Friday they go into flower! :mrgreen:
 

onthedl0008

Well-Known Member
Be carefull with the sacks sir. Some of them explode prematurely. In as little as a week or 2 from light schedule change. Just chop them down dont take any chances. The females however. Id take all of there lower stems at this point and clone them..
This forces top cola growth.Besides those lil popcorn buds that grow on the lower stems are never quite as good as the tig bitties that grow on top. And ur still early at it so its not going to affect the plant if u act soon.
Just get the shears out bro.
 

Breakdancer003

Well-Known Member
so all 6 are females :) and i couldn't help my self i topped every single top threw them back into vegitative growth and i am selling my t5 flouresent to buy a 1000 watt for flowering. so by the time the 1000 watt shows up they should be done vegging and be twice as bushy as they are now. Then i will have the 1000 watt in the center with the 2 400 watts bare bulb on the sides for Flowering
 

Stonedz

Well-Known Member
Be carefull with the sacks sir. Some of them explode prematurely. In as little as a week or 2 from light schedule change. Just chop them down dont take any chances. The females however. Id take all of there lower stems at this point and clone them..
This forces top cola growth.Besides those lil popcorn buds that grow on the lower stems are never quite as good as the tig bitties that grow on top. And ur still early at it so its not going to affect the plant if u act soon.
Just get the shears out bro.

Awww ok, ill get rid of the males pretty soon then, im gonna wait a till friday at least, just to make sure lol even though im already sure... i dont wanna chop any down... my poor babies! :cry:


I'm not sure if im gonna clone them, i just found out that im gonna have to move in a couple months so i think im just gonna grow these few out and hope for a few females on the next batch. Not saying i dont want to clone em bro, but i dont want to have to transport any plants when the time comes lol.
 

Stonedz

Well-Known Member
so all 6 are females :) and i couldn't help my self i topped every single top threw them back into vegitative growth and i am selling my t5 flouresent to buy a 1000 watt for flowering. so by the time the 1000 watt shows up they should be done vegging and be twice as bushy as they are now. Then i will have the 1000 watt in the center with the 2 400 watts bare bulb on the sides for Flowering
Damn bro, 6 out of 6 lol nice! Those are gonna be some monsters for sure, i cant wait lol. You're gonna get a sunburn from all these lights lol cant wait to see the new set up! bongsmilie
 

onthedl0008

Well-Known Member
1800 watts that does sound sick. What kind of flower space bro?

Yea Stonedz moving sucks. So does chopping down male plants! But ive learned to do this with no remore at this point. You have to do it fast and just not look back.Kinda like a one night stand.
 

Stonedz

Well-Known Member
Yea Stonedz moving sucks. So does chopping down male plants! But ive learned to do this with no remore at this point. You have to do it fast and just not look back.Kinda like a one night stand.
Haha Pimptastic :clap:

Yea i guess ill stick the leaves in some books and hand em out as birthday presents lol. Saves me some shopping! :bigjoint:
 

Breakdancer003

Well-Known Member
their in a 4 foot by 4 foot by 6 foot grow tent. I plan to place the Co2 bottle in the very center on the ground placing all 6 plants in a circle around it then hang the 1000 watt MH with reflector in the very middle over the plants and co2 tank ( the HPS is to expensive lol but i can get a 1000 watt MH for 145 $ so im doing it it wont be as good as a 1000 watt hp but it will make some good budds) then take the 2 400 watt HPS bulbs remove the reflectors and hang the 2 bulbs bare on the sides of the 1000 watt. then just rotate the plants to the spot on their left every day to ensure even light coverage. after this topping ( if nothering hermies due to stress from topping or switching back to veg :( ) I should have 6 plants 1 1/2 - 2 foot tall with 50 - 60 + tops per plant. then we have 1800 watts of power to turn those into the dankyity dank

Pound plus anyone ?!?!?!
 

Stonedz

Well-Known Member
their in a 4 foot by 4 foot by 6 foot grow tent. I plan to place the Co2 bottle in the very center on the ground placeing all 6 plants in a circle around it then hang the 1000 watt MH with reflector in the very middle over the plants and co2 tank ( the HPS is to expensive lol i can get a 1000 watt MH for 145 $ so im doing it it wont be as good as a 1000 watt hp but it will make some good budds) then take the 2 400 watt HPS bulbs remove the reflectors and hang the 2 bulbs bare on the sides of the 1000 watt. then just rotate the plants to the spot on their left every day to ensure even light coverage. after this topping ( if nothering hermies due to stress from topping or switching back to veg :( ) I should have 6 plants 1 1/2 - 2 foot tall with 50 - 60 + tops per plant. then we have 1800 watts of power to turn those into the dankyity dank

Pound plus anyone ?!?!?!

I'm stoked man lol thats gonna be badass, even with the MH, you're still gonna get some nice buds :clap:
 

Breakdancer003

Well-Known Member
well i made my order for the lights today heres an update

i ordered the 2 400 watt HPS lamps and i am going to run those along side my 2 400 watt MH lamps for a good mixed spectrum to get the added benefits of both lights. If it turns out this isn't working well I will just switch in the 2 HPS bulbs for the MH and have all 4 HPS going but time will tell on this one

i will set the lights up like this in 2 weeks for flowering


MH......................HPS
...............................
...............................
...............................
...............................
...............................
...............................
HPS......................MH


then arrange the plants like this sticking the 2 most agressive plants right in the center with the other 4 comming off the corners like this


* = plant

----------------------
-------*-----*--------
----------------------
----------*-----------
----------------------
----------*-----------
----------------------
-------*---- *--------
----------------------


this will ensure maximum light coverage focusing all 4 lights on the 2 most agressive females for max bud production.

heres how they look now after the last topping 2 days ago ( all the tops you can see have been cut and are showing atleast 4 new grow heads some have 6 to 8 ) So i hope in 2-3 weeks they will be monsters and ready for the intence flowering. I am trying to get 4 ounces dry per plant ( wishful thinking lol ) but we will see how this goes



they have come along way since i have started posting with you stone =) we are going to have some great harvests and i think now we will be starting at the same time to
 

Stonedz

Well-Known Member
Damn, you're gonna get some good buds indeed, i like your setup idea too. Gonna have nice coverage with the lights for sure. I cant wait man lol i wish i could fast forward to 5 weeks flowering! You're gonna have so many tops, it's gonna be madness. Keep it up bro, they're looking great!

I watered mine today and ended up taking one of the males out, but im gonna wait on the others just to make sure they are males.


Mine are going into flower this Friday, so 2 more days!
 

Breakdancer003

Well-Known Member
wait till next thursday :) that's probley when i'm starting ( assuming theirs enough new growth from the toppings i did ) a few more days can't hurt =)
 

Stonedz

Well-Known Member
Haha we'll see we'll see, depends on how many females i have, cause it's looking like 2 out of the 8 now... bummer lol. I'll see on friday and let ya know what im gonna do brotha
 

Stonedz

Well-Known Member
Nice bro. Ur like a mad scientist grower of sorts.

Haha i was nervous as hell before i plugged it in, i expected some kind of explosion, but it worked!


I'm going through my plants and pulling the males and hermies right now... man its tough lol.
 

Breakdancer003

Well-Known Member
I know how you feel i am reaping what i sewed when i topped my plants right after i had sexed them and switched them back to 18/ 6 . the combined stressed hermied 3 of them so i am down to 3 females. Which means i am just going to flower 2 and clone the 3rd
 

Stonedz

Well-Known Member
I know how you feel i am reaping what i sewed when i topped my plants right after i had sexed them and switched them back to 18/ 6 . the combined stressed hermied 3 of them so i am down to 3 females. Which means i am just going to flower 2 and clone the 3rd

Nooooo, thats lame bro, at least u still have 3 though! Should seperate them and set some CFL's over the herms and get something out of em lol. Or even breed the herm with a small female bud... i hear thats how they get feminized, but who knows lol.

I ended up pulling 4 males out, so i have 2 females for sure, and 2 unknown yet. So im just gonna wait a lil longer and stick into flower next week i think.
 
Top