My DIY Dual Cabinet System

SomeGuy

Well-Known Member
Hey man, nice setup. Very well built cabinet, props to you. I was wondering, what fans did you use to cool your "cooltube"? that looks absolutely perfect.
 

Isthisnametaken

Well-Known Member
Hey man, nice setup. Very well built cabinet, props to you. I was wondering, what fans did you use to cool your "cooltube"? that looks absolutely perfect.
Thanks

I used some small 120V fans. They look like computer fans. They came in the cabinets.
 

SlowToker

Well-Known Member
Wow, I would never try to build anything out of fiber class. You must do car work.
If I could do it I'd be restoring my 74 Vett that needs a lot of it.

Glad to see you got your stuff, waiting to see the finish.

I'm calling about the Pepsi machine today.

Peace

Well.. had a hell of a time with fiberglass fabrication and scrapped the whole idea. Need a little more practice before I attempt to make my own trays.

Went out this morning and did find the trays and reservoirs I will be using. Also purchased the necessary hardware and will begin the Ebb and Flo system tomorrow.

Also finally found my timers so I will be able to finish off the wiring.

Purchased the pots I will be using for the system. Took the mothers and transplanted them to the new containers after flushing the Miracle Gro potting soil they were in with Clearex. I'm using Fox farms now, I think the miracle grow was burning them a bit.

They were pissed off after being flushed and transplanted. I was a little scared until I eventually saw them perk up a little.
 

Isthisnametaken

Well-Known Member
very nice i love custom .......... might wanna move that heater away from the plants it really close.....very nice i was thinking of building a grow in a knack box but then i found some free space in my house....just built a false wall cant even tell i love it :-P well great job man ill be watching the grow keep up the good work!!! :leaf::leaf:
The heater is actually facing the wall so it heats the cabinet and not the plants directly. Thanks for tagging along. Love to see some pics of your set-up.

Ahh.. I see that, I was just wondering your CFM per fan. I am looking at doing something similar but want to make sure I have enough air movement.
Not sure what they were. Going to get some more fans today, I'll let you know the CFM before I install. I can tell you they move plenty of air. The glass infront of the bulb is barely warm to the touch. Had I known it would have worked so well I would have gotten a 600W HPS.

Wow, I would never try to build anything out of fiber class. You must do car work.
If I could do it I'd be restoring my 74 Vett that needs a lot of it.

Glad to see you got your stuff, waiting to see the finish.

I'm calling about the Pepsi machine today.

Peace
Goodluck with your cab. Post a link in here when you get it started, I'd like to follow along.
 

Hulk Nugs

Well-Known Member
yea i love the air flow for your light i have to do somthing like that my flower room get so freaking hot cause of the light and now im going to enclose my veg/mother room so we will see how hot it gets in there .....im trying to hook up a thermostat and humidistat so i dont have to worry about them but we willl see how it goes......................Do you have a thermostat or humidistat controlling the climate? yea and i got my grow on the link below pics and all
 

Isthisnametaken

Well-Known Member
yea i love the air flow for your light i have to do somthing like that my flower room get so freaking hot cause of the light and now im going to enclose my veg/mother room so we will see how hot it gets in there .....im trying to hook up a thermostat and humidistat so i dont have to worry about them but we willl see how it goes......................Do you have a thermostat or humidistat controlling the climate? yea and i got my grow on the link below pics and all
Right now I only have an analog temperature controller that kicks the ventilation on when the temp gets to 75 deg. It works great but I'm having problems with my heater. It seems to kick on whenever it wants and sometimes at night it doesn't kick in. My thermometer recall function shows it getting as low as 53 deg at night.

I would like to get a thermostat and have it control vent fan when hot and heater when cold, but I have no idea how to wire that. I don't even know if the standard thermostat for a house would control a 120V plug.
 

Isthisnametaken

Well-Known Member
To tell you the truth, I don't know for sure. I believe you start a thread under the "Grow Journals" forum and document your entire grow. You can post a link in your signature box so people can easilly look at your grow.

I'm going to start one when my mothers get ready for cloning and my box is done.
 

josh4321

Well-Known Member
the seeds that i started are form my out door dont know what they are any ideas of what i should call them? and man you are my idle you have 1 of the best setups that iv seen on this site
 

Hulk Nugs

Well-Known Member
right on i love this site everyone helps each other .....well most everyone......Taken thanks for the info yea i been talking to some other guy about just how to hookup a small airconditioner or the some fans to a house thermostat you can get at homedepot...so if he comes threw with the info ill throw it your way.......did your analog temp come with your box ? ?
 

Isthisnametaken

Well-Known Member
right on i love this site everyone helps each other .....well most everyone......Taken thanks for the info yea i been talking to some other guy about just how to hookup a small airconditioner or the some fans to a house thermostat you can get at homedepot...so if he comes threw with the info ill throw it your way.......did your analog temp come with your box ? ?
Yeah let me know if you get it figured out.

I had the analog temp controller from beermaking. When you ferment lager style beers, they need to be at around 45 degrees. I would just hook it up to a freezer that held my fermenting vessels and it worked great.
 

Hulk Nugs

Well-Known Member
lmao very nice i was thinking of making my own beer when the samadams contest was going on but my girl told me i would make to big of a mess :sad: oh well i have a fridge full so im happy plus i wanna make a kegerator and not sure if i could fill it my self with my own beer oh well thats another site hahaha ..........i can tell you dont limit your self thats freaking sweet, i thinks thats the way it should be dream it do it or build it ................keep up the good work :weed:
 

Isthisnametaken

Well-Known Member
lmao very nice i was thinking of making my own beer when the samadams contest was going on but my girl told me i would make to big of a mess :sad: oh well i have a fridge full so im happy plus i wanna make a kegerator and not sure if i could fill it my self with my own beer oh well thats another site hahaha ..........i can tell you dont limit your self thats freaking sweet, i thinks thats the way it should be dream it do it or build it ................keep up the good work :weed:
Ahh man, you should do it. You can get started for like $100. After the initial investment you can make 5 gallons for about $25. Were talking kine beer 6-8%, not 4% budweiser. Although you can tailor your recipes to make any kind of beer you like light or dark, strong or weak.

I'm about to brew a batch this weekend, I'll take some photos and put up a post in the "Toke and Talk" forum. Check it out.
 
Top