DirtyDoper
Active Member
Ok. I am in the middle of my first MJ grow. I am looking to get some input on the flower box I have built .
I am starting with an old wardrobe that is approx. 38 in wide, 21 in deep and 60 in tall. It is kept in a room that is a constant 70-71 degrees. With all lights on its 78-80 degrees. in the box.
I will be using a 400w HPS in a DIY cooltube of the lighting.
I will also be using a couple 2700k CFLs as supplemental light for the lower branches. The entire interior of the box has be wrapped with mylar.
There have been 4 4in holes cut in the wardrobe. All have been fitted with PVC elbows with the interior painted flat black to act as lighttraps. 2 at the top in the back, one on each side at the bottom. One of the top holes will be the active exhaust for the box. It has a PC fan (that has been rewired) rated for right around 120cfm. The other top hole will be the active exhaust (same model fan) for the cool tube. The two side holes at the bottom will work as passive intakes.
There are 3 different timers being used. One for the lights(12/12), one for the cooltube(which starts a few minutes before the light comes on and turns off a few minutes after the light is off.), and one for the box exhaust(which runs 2 hours on/2 hours off thru the light cycle).
Today is day one of Flowering. I have 3 plants (2 female, 1 unknown) that are in the box right now. For the first 7-10 days I will be using no nutes. After that I will use Earth Juice Bloom for every other waterup until 2 weeks before harvest.
One day a week I will Not use the vent fans. I will have 4 DIY CO2 generator (sugar,water,yeast) bottles to flood the girls with a nice tasty bit of CO2.
I am starting with an old wardrobe that is approx. 38 in wide, 21 in deep and 60 in tall. It is kept in a room that is a constant 70-71 degrees. With all lights on its 78-80 degrees. in the box.
I will be using a 400w HPS in a DIY cooltube of the lighting.
I will also be using a couple 2700k CFLs as supplemental light for the lower branches. The entire interior of the box has be wrapped with mylar.
There have been 4 4in holes cut in the wardrobe. All have been fitted with PVC elbows with the interior painted flat black to act as lighttraps. 2 at the top in the back, one on each side at the bottom. One of the top holes will be the active exhaust for the box. It has a PC fan (that has been rewired) rated for right around 120cfm. The other top hole will be the active exhaust (same model fan) for the cool tube. The two side holes at the bottom will work as passive intakes.
There are 3 different timers being used. One for the lights(12/12), one for the cooltube(which starts a few minutes before the light comes on and turns off a few minutes after the light is off.), and one for the box exhaust(which runs 2 hours on/2 hours off thru the light cycle).
Today is day one of Flowering. I have 3 plants (2 female, 1 unknown) that are in the box right now. For the first 7-10 days I will be using no nutes. After that I will use Earth Juice Bloom for every other waterup until 2 weeks before harvest.
One day a week I will Not use the vent fans. I will have 4 DIY CO2 generator (sugar,water,yeast) bottles to flood the girls with a nice tasty bit of CO2.
Attachments
-
82 KB Views: 5
-
111.3 KB Views: 9
-
121.1 KB Views: 8
-
126.3 KB Views: 9
-
127.7 KB Views: 6
-
155.8 KB Views: 10
-
145.6 KB Views: 4
-
169.6 KB Views: 6
Last edited: