My new 4x3 flower light

I assembled the first phase of my light today. It’s just four ChilLed logic pucks on an HLG-320H-C1750B, so far, but I’ll be adding another 150-200 watts of LEDs on another driver. Probably strips, maybe QBs.
My frame is made of repurposed steel shelving parts that were lying around the shop.
I made my frame in such a way that the pucks can slide wherever I want them. Currently they are mounted toward the center, but when I add more LEDs the pucks will move to the corners. I just loosen the set screws and slide the heatsinks where I want them. When it hung a little crooked in the tent, I adjusted a couple of the heatsinks to balance the frame.

Nice! Very impressive

I like the idea of adding multiple spectrums to my light, on separate drivers. Are vesta strips still considered a good choice? Sol-strips?
Any suggestions?

thats cool. i got rapids chilled logic 2x4 and 4x4 kits and really digging them so far.

With solstrips you can get nearly what ever spectrum you want. To fill in anything that's missing. I would suggest 730nm on at least one board

TEKNIK said:

With solstrips you can get nearly what ever spectrum you want. To fill in anything that's missing. I would suggest 730nm on at least one board

Click to expand...

I like it! Can I run six or seven of the $10 Cree strips with one or two strips with 730nm all on the same driver?

So long as you balance out the voltage you can. One benifit of 730nm is to shorten grow times that's why you need a separate driver on a separate timer

Easiest way to set up the drivers is to have a 48V driver for the cree strips and a 24V driver for the 730nm strips.

Well, I jumped on a four pack of 3000k qb120v2 when they came back in stock this morning. I’ll get those running and then add some reds and uv when I can. Woohoo!