Need help on the set up

Hi

The tent is 2.4m x 1.2m x 1.2m

Doing 10 cheese plants

Under 2 x 600hps lights

Now I'm going get a RVK fan 8' and a 8' rhino pro filter

Which is best to set this up

Filter - ducting - fan - ducting - window?

Or

Filter - fan - ducting - window?

Thank you
 

Roobarb

Well-Known Member
In my space I go Filter - fan - hood - window
It's more efficient to blow air across the bulb than suck. Before I always had fan between hood and window. Read it somewhere on here and switched them around. Cooled my space by approx 5 degs F
 

sunny747

Well-Known Member
flitter, fuct, duck, flan, duck, out :)

I have been told it's best to pull air through the filter that's why the pre filter is on the outside. I push air through mine and it works fine.

I go hood, duct, fan, duct, filter.. I do this because I cut a hole in the wall and run my final piece of duct through there where it hits the filter on the other side of the all in another room. Keeps my grow room nice and cool.. Living room gets a little toasty sometimes though :)
 

kiwipaulie

Well-Known Member
In my space I go Filter - fan - hood - window
It's more efficient to blow air across the bulb than suck. Before I always had fan between hood and window. Read it somewhere on here and switched them around. Cooled my space by approx 5 degs F
Bang on info IMHO
 

kiwipaulie

Well-Known Member
Thank you for your replies

I don't have a tube with my light

It's just bare light so I can't put ducting through the light
Go filter, straight to fan, then duct out. You put ducting In between, better hope no little holes appear in the ducting between the filter and fan
 

sunny747

Well-Known Member
It seems as some fans hook up to a filter very well.. My setup doesn't do that. I wish it did. I have to have ducting. When I got it home from the store I was like "WTF?" How do these go together? It seems logical that the filter and fan would attach easily and snugly. I have a hurricane and a phresh 4 inch.
 
Top