Need help with light frame dimensions 3x3

hornedfrog2000

hornedfrog2000

Well-Known Member
I was hoping someone could help me with the spacing of my cobs, and the dimensions of my lights frame. Ill be running 8x 3590 over a 3x3 flood tray. I would assume id want the frame to be a little smaller than the table itself. I'm using kits from timber so i have thr ledil reflectors too... thanks for the help.
 
hornedfrog2000 said:
I was hoping someone could help me with the spacing of my cobs, and the dimensions of my lights frame. Ill be running 8x 3590 over a 3x3 flood tray. I would assume id want the frame to be a little smaller than the table itself. I'm using kits from timber so i have thr ledil reflectors too... thanks for the help.
Click to expand...
Pinned heatsinks they can slide or be screwed in place. Hence extra holes
 

Attachments

  • 1474547894827-1311542366.jpg
    1474547894827-1311542366.jpg
    759.5 KB · Views: 8
  • 1474547958389997384484.jpg
    1474547958389997384484.jpg
    1.5 MB · Views: 8
  • 1474548122518391893601.jpg
    1474548122518391893601.jpg
    1.1 MB · Views: 8
I've also found that I like smaller than bigger. Meaning if I need 8 cobs, two 4 light units is more convenient.
 
On a side note, gorilla glue mounting tape. No drilling and sticky as hell. I've run a strip down a rail and you can slide cob.
 

Attachments

  • 1474553765777-1987813255.jpg
    1474553765777-1987813255.jpg
    876.1 KB · Views: 7
You must log in or register to reply here.
Back
Top