New Pics, New Questions

In picc is my extractor fan wif filter..

Ill work out the width etc now

Height - 1100mm
Width - 500mm
Length - 900mm

that is basicaly called an inline. it should say the cfm rating on ot. looks about 4 inch? 150 cfm probably. also i would try to keep the hosing as straight as possible

Ok ill get up there 2moz and find out the info on it and straighten that ducting..

Any info on ma plants u wud recommend?

dam you and your metric. and i`m canadian. lol
right now your main concern would be to get the room dialed in first or i cant diagnose plant issue properly. your problems may not be the plant but your room. one thing at a time or we wont know where the issue is.
if you can convert the mm to feet faster than me post it up

ok i got it.
3.5 x 1.6 x 3 = 173 aproximately. so i would have a fan with about 250 cfm
i think my math is correct, i`m a littl e buzzed right now, if its wrong i`m sure someone will jump on it for us

* Update * Day 57 from seed.. CheeseWreck

#1

* Update * Day 27 from seed.. BlueCheese

#2

* Update * Day 57 from seed.. CheeseWreck

.. This plant is not that well healthy looking at the top e.g skinny crimply but i think if u look at pic there are 4 new shotters making there way to the top so will hav 5 heads on 1 plant sorta thing is that normall .. mate sed chop themm i fort id ask around 1st?

* Update * Day 57 from seed.. CheeseWreck

not sure how much room you have above the light to keep rasing but if your not flowering by now your going to get some really big plants.... i see that topping is not in your nature either.... how often are you watering?.... when plants are curling downwards its usually overwatering... the bottom leaves will fall off the plants use them as shitters... most people make the mistake of ripping them off only to find out the plant just makes another shitter.... of course it could also be a N difeciency ....

im not liking how they are curling down on the tips like that... must be the temp issue that you are working on....

like i siad... how often do you water/.... what are you watering with?... ph of what?.. if you dont have any testers and stuff you should consider yourself lucky that they look this good... unless you are using ro water and then i have found that most store water is at a good range of 6+.. never above 7 and very low ppm .like 12.... safeway water i have found to be the best (when your filling them up in 5 gallon bottles)... it has a ppm of 2 i know... awsome right...

anyway man good luck with your grow...

the clawing is to strong of nutes, back off a touch. the canoeing is from the heat.
what are the temps now

watering wif bottled water ' mountain spring ' every 2 - 3 days ruffly 200ml each plant maybe ..

Heat is around 32C and Rh at 50-60%ish

i have 2 plants like 2inchs or so over 1ft and the other is nearly at a ft but the blue cheese is still quite yung ???

No as this a 1st time i dont no about topping.. etc

I will go out n gett a PH tester to test my bottle water 2mor wats it ment to be and how to increase or decrease the water?

light is 24cm upbove plants now and can go up to 50cm max from plant at its height now

get the ph tester and i would suggtest just getting some ph up solutuon. hutes usualy will lower ph. there are other materials used to adjust ph but this stuff is so cheep and you only need a few drops. you dont want to top ater they have started to flower, to much stress. hard do tell from the pic`s but i would say from looking at the size of your pots and the fact that they have started the flower cycle you need to give more water. 200 ml is only about 1/2 to 3/4 cup. double that, now it will take a bit longer to dry up. if you have issuse with the top of soil drying to fast compared to lower then cover soil with black/white plastic or similar.
watch the tester you buy, make sure it has the correcr range. some cheep pool ones aren`t good enough. usualy not low enough. get something that will go down around a ph of 5.
how much run off do you get?

If you're willing to buy the bottled water may I suggest looking for something that has been distilled or R.O. Alot of the time the "mountain spring" or any kind of spring water is just tap water run through a UV light or a micro filter. Not saying that it's bad water to use just that if you get distilled or R.O. the ppm should be really close to 0, meaning there is only pure water in that bottle, no other minerals.

YEah safeway filtered water is the best ... ppm of 2... winco had 12...

dam i love bc water mine is perfect ph and 0 ppm right from the tap.
another cheep way for water that i use is get a fish tank filter and a resivior and run the water through the fish filter and you will have great water all the time. my water stayed consistant the whole grow

Dude, have you got any gaps around the door to your growroom?...your plants look fine and i have had the same problem with temps, exact tly the same as yours in fact. your top leave that you say look a little crinkly, they are but they rellax out in time, no worries there, if you want more humidity hang up a wet towel in your room, get you lights between 15-18 inch above plants, get fan ociliating from side, get 2 fans if poss and seal any gaps around doors etc, especially if your exhaust is near to or above your door...If any of this don't make sense dude, forgive me i'm stoned, ask and i'll try to clarify.

whats the best way to seal your door?? ive tried a few things.. latches and suck but i think the next thing might be weatherstripping