Oxycloner

Been using this cheap little bubble cloner for a while now with great results. I just make 45 degree cuts add tap water to the res and let her go. I added too much ful mag to clones about 2 weeks ago. Don't know why I did this, guess cause I heard fulvic acid promotes root growth. Anyway this snot looking stuff attached itself to my clones and res. I realized what I had done. So I emptied out res, removed clones from neoprene holders and I cleaned and bleached everything. Even ran bleach water thru pump for about 2 hours. Seems like the usual root bumps I would have by now are not showing up. Clones look good still, water in response is clear as a crystal. Maybe holy grail kush takes longer to clone. I never have lost a strain since I have been using the oxycloner and having 95% clone rooting ratio. Seems like the process is slower this time for some reason. Anyone using an oxycloner care to chime in. U might have some helpful tricks I don't know about. By the way I had one hgk root before I added too much ful mag. I have took all new clones just waiting for white root bumps. Come on fellow oxycloners share some tricks or techniques.

Should this be in a different section or has no one ever used an oxycloner.

Anyone? C'mon somebody else has to use a similar type of bubble cloner. U know neoprene collars in a lil tub of bubbling water.

I use a homemade aero cloner.. I left too much bleach in the res last time I cleaned it and had a problem rooting.. The stems actually turned white. I was able to change the water, add some clonex solution and just trim the bleached stems. Still got 100 % success.. Only problem besides a little leak that I ever had.. 100 % success everytime..

I not getting any slime anymore . My cuttings look good. Just don't have any root bumps yet? Patiently waiting. Been experimenting with hth pool shock to stop the pythium. Looks like the res is extremeley clear and clean.

Water temps are 74.5 with 3 ml of shock solution. Clones look good some fan leafs are yellowing but no slime and res is clean.

Should water temps be close to 80 for cloning.

I use a diy bubble cloner and I would give it a 90% success rate. The only time I seem to have problems is when it's to warm (mines in a cab in the garage in Florida) or I need new airstones. The airstones look like there working fine, but when you compare them to new ones, the difference is night and day. I have strains that show roots in days, others like chemdawg sometime takes 3 weeks or more.