pc/ultimate scrog grow yield!

mr.lightgr3en

Active Member
So glue sticks wouldn't work?
Would you recommend. A glue gun or
To much of a mess.
Yea I might just put it inside. With
The box and duct the way in and out
 

polyarcturus

Well-Known Member
i recommend a staple gun(10$ usualy comes with staples) its one of my favorite tools:)

glue gun sounds like a terrible mess at least in my hands lol i can see me right now with that shit all over my hands.

glue sticks could work, but i wont think they will hold up to any heat. i wouldn't use em.
 

mr.lightgr3en

Active Member
Well see I found this
Really good reflective wrapping paper for gifts.
My cab is plastic idk if staples would work I will try it tonight.
I just didn't want a bunch of little staples coming out behind the
Cab. I'm trying to make it as stealth as possible.

Yea hot glue fun is always a mess lol
 

polyarcturus

Well-Known Member
fuck then i would just go to the hard ware store and just read the lables on some glues. there is probably something that will work. gorilla glue or something im sure.
 

mr.lightgr3en

Active Member
Yea I just read on Google that gorilla glue is
Perfect for that lol.
I just need to sand out the plastic s little so that
The glue can get a better grip :)
Thanks poly you are alot of help.
Even though this thread sucks now and doesn't deserve a 5star
I'm learning alot and I am trying to make all this grow

Beside this is a very good hobby keeps me entertained =D
 

Matchbox

Well-Known Member
So I went to look at the 6' inline fans.
And they are exactly the same size as the
Humidafier fan I have so it must be as loud as it as well.
Well yeah they are the same size but they are built a helluva lot better than your current 6" so your wrong there, it would be quieter also as the fan is contained, yours just looks like a death trap lol I could see myself catching my fingers in it all the time and loosing a lot of blood :)

Plus a proper inline fan can be attached to ducting and therefore a carbon filter better... 'sup to you though.
 

mr.lightgr3en

Active Member
Yea that's what I was thinking.
And beleave me a caught my finger a couple times
Lol.
It has a lid for it but the way I have it setup won't work won't fit.
undecided in what I should do yet and if I can I'll get better pics up.

On the brightside I came home home last night to discover
all my plants are getting harry ass fuck

Can a hermie unhermie.
 

The New Jim Jones

Well-Known Member
no a hermie does not un hermie, you can get an inline fan from any hydroponics store in your area, even a 4" would be better i think its about 150 cfm, i would really throw down the cash on that
 

mr.lightgr3en

Active Member
I have a plant that's a hermie as soon as I saw balls I plucked
Everything off maybe even some new growth
Now all I see is pistils and no balls.
Well (YET)

Yea they sell it at my hardware store the 6" for 30$
 

polyarcturus

Well-Known Member
I have a plant that's a hermie as soon as I saw balls I plucked
Everything off maybe even some new growth
Now all I see is pistils and no balls.
Well (YET)

Yea they sell it at my hardware store the 6" for 30$

its still a hermie though, waiting to produce balls, unfortunalty but if you stay on top of it they may never reappear. still a herm but it will flower as normal cause you keep getting the balls. you can still grow a herm and prevent polination, but you cant stop it from being what it is.


cheapest filters?
http://www.meijer.com/s/can-filters-9000-without-flange-carbon-filter-with-pre-filter/_/R-216826;jsessionid=6C7437716DF463E295AF23DAB2737D80.instance03?cagpspn=pla&cmpid=Google-G_US_Meijer_eCom_PLA_Lawn_Garden&kpid=358510B
you will still need the flange so about another 10$ on top of that.

could get one of these but i think mine is shoddy IMO
http://www.gothamhydroponics.com/fans-filters-ducts/filters/4in-300mm-hydroponic-carbon-filter.html
 

polyarcturus

Well-Known Member
thier not that expensive not for what they do. you can get a good filter/fan setup for around 140$. which isnt too bad IMO cause its about the only fan youll need for the room.
 

mr.lightgr3en

Active Member
Yes sir but that way over my budget lol.
this fan I have is perfect keeps temps good.
Which is what really matters.

So in that case it will be fine to use
The inline fan I thought it was.
But it will be best if I buy the centrifugal fan right?

My budget is about 100$
So I think ima do some DIY! STUFF.
IM GOING TO GET A 6" INLINE FAN.

im going to see of it works with the temps
And im going to use air ducting for no light leaks
Make my self a airfilter and get some
ONA help =D
Kinda what I was planning yo do with the PC box

It would all work the same right its just
That if I get the right stuff I will work. Less =D
But at this moment im broke =/
 

mr.lightgr3en

Active Member
Why 2?
I have a 6" fan (not an inline fan)
Working as an exhaust with no intake and its doing the trick.

I have a 4" hole at the very bottom for a little freshair.

What happens if no fresh air is being put into your grow box?
 

mr.lightgr3en

Active Member
ok so i lost track of time.
but finally my baby hope is flowering and showing lots of improvement
for those who have missed out of my thread or just got bored lol.
i had a drainage issue and effected my plant i also had a little bit of bug problems got that solved as well thanks to (poly, and matchbox) thanks guys
for sticking around and helping a noob out. thanks any other person who has helped me aswell.

so according to my dates today would have been DAY 44 of flower.
i dont know exactly how long this problem put me back but here are some pics of her that hopefully you guys can help
me determine how long she has actually been flowering im thinking 2weeks but then again i dont know lol.

i also had to put hope into a 400w micro grow i got going on. sorry i couldnt keep it in the pc box i broke my thread :(
reason: HOPE is a girl and i have another one MIRACLE who is a female too but i had one hermie on me so i had to move
my 2 girls together and my hermie by its self ofcourse the wouldnt fit in my pc box so i had to put both of them under the 400watter.
and i have the hermie in the pc case. wich is looking bad by the way he/she has lots of hairs so far no balls but lots of dried up yellowing leafs idk why.

HOPE has 1 cola with dried up yellow leafs im assuming its from the bugs over fert and drainage yea i put her through all that but i have learned my lesson!
other then that here they go any advice and tips are appreciated thanks :) HAPPY GROWING!
NUG.jpg
 

Attachments

mr.lightgr3en

Active Member
GERMINATION TIME =D
ok my fellow growers I decided to keep this thread going
And I started germinating another BAGSEED I got from a
Buddy of mine named it C'BAS KUSH lol unknown name
Made it up (inside joke)!

So im gonna grow the hermie I have inside my PC box....
Outside. Anything I should do to the box before I start growing in it again
Idk maybe clean it sanatize if it matters?

I'm going to veg for 3wks just like last time but this time im going
To top twice and Fim a couple times.
I might veg and flower with the same lights 42watts 2700k
I'm really hoping this grow goes well.

No nutes im going to put my seed sprout on some
Organic potting soil that has been siting in my back yard for
A couple months then im going too transplant 1 time
To its original pot with FFOF soil give it 1 week of recovery
and the would should treat it with nutes for about 3weeks.

Wish me look guys sorry I suck at this im trying =P
Happy growing!!!
 

The New Jim Jones

Well-Known Member
hey we all start somewhere man, and use the FFOF soil instead of the organic compost, because its much easier to deal with FFOF than some unknown soil, with FFOF you don't feed any nutes for the first 3 weeks or so. Veg and flower with 2700k if you want, just use a lot of em. you dont need to clean your PC box, or anything, just throw the hermie in there and let her/him do her/his thing
 
Top