philips industria hps light

hi i was wondering if anyone can help..i have bought a hps lamp off of ebay (it is an industria SGR 200 400 watt hps)but it did not come with a wire or plug i thought it be easy enough to connect but on opening lamp i dont know were to connect the wires any help would be appreciated...may thanks in advance.p.s i live in uk and lamp came from holland so same voltage etc..

You have the wiring diagram right there on the ballast. I can't see it fully, and missing some of the wires in the pic.

Follow the power in,on one side the power is connected to power to transformer and the capacitor.The other power leg is connected to the transformer and the ignitor and one leg of the lamp.The other leg of the lamp is connected to the ignitor and the 3rd leg comming off of the transformer.OPH

i think i see what you are saying...so if i connect my live and neutral from the plug wire to the live and neutral on the buzz bar (the thing with screws)that should be it..mucho thanks in advance

tada cooking with 400watts yeeha.........ta

can you post a pic of whole lamp as i think i have bought the same light off ebay if so i will post pic of my wireing ?

baparama said:

i think i see what you are saying...so if i connect my live and neutral from the plug wire to the live and neutral on the buzz bar (the thing with screws)that should be it..mucho thanks in advance

Click to expand...

Just follow the yellow diagram. N stands for neutral and L stands for Live. Simple as hell!