Pictures of your DIY lights - Post your pics!!!

NapalmZen

Well-Known Member
I have 2 tents that size, you can actually get nice yields from them.
i have one(vivosun) and i just bought a 5X5.

Here i made my CXA3070AB's with 1.5A Chinese Drivers....
I've two of these... Now just running one, will start seedlings soon..
Running soo cool, that LED is the stealthest option you could have.

View attachment 3429390
View attachment 3429389
duuuuuude... i put three of those in one fixture.

https://www.rollitup.org/t/my-new-diy-grow-light.931434/#post-13313610

 

The Dawg

Well-Known Member
Hey Fellow DIYer's I Reported This Build As A 240 @ 1750mA However When I Hook Up Killa-Watt -Meter I found Out That I was Only Putting Out 215 Watts On A 240 Watt Driver. However Upon Investigating The Spec Sheet I Found Out About Over Voltage Protection Which In Turns Limits The Current Hence Only Putting Out 215 Watts On A 240 Watt Driver. Now What I Did was Order A 185-1400B. Now I'm Putting Out 190 Watts On A 185 Watt Driver much Better :hump:
 

bassman999

Well-Known Member

The Dawg

Well-Known Member
Thoughts on using 1/16" thick Aluminium angle for a square 4 light set up?
1/16 Will Work for A Square. For 4 Cob Bar Sets I Would Use 1/8 Inch :hump:
Those drivers seem pretty comparable to the MW ones with a lower price based on my reading.
Wow Finally A Inventronics Driver That's Cheaper Than Its MeanWell Counter Part. Rock On :hump:Also they Run 10-15 Degrees Cooler Than MeanWell :peace:
 

bassman999

Well-Known Member
1/16 Will Work for A Square. For 4 Cob Bar Sets I Would Use 1/8 Inch :hump:

Wow Finally A Inventronics Driver That's Cheaper Than Its MeanWell Counter Part. Rock On :hump:Also they Run 10-15 Degrees Cooler Than MeanWell :peace:
I was thinking of buying some 320 watters based on the price of $80 US each
 
Top