• Here is a link to the full explanation: https://rollitup.org/t/welcome-back-did-you-try-turning-it-off-and-on-again.1104810/

Pictures of your DIY lights - Post your pics!!!

Canadain Closet Gardener

Canadain Closet Gardener

Well-Known Member
My light for my 36"x20" tent
I made the frame modular so I can expand it to a 3x3 or a 3x5 tent later.
Aluminum purchased from https://www.metalsupermarkets.com/ almost half the price of Home depot
20180228_225657.jpg
I tap some threads so it comes apart easy
20180228_185801.jpg
20180301_020107.jpg
I hate wiring.
20180301_032000.jpg
Are they fake if wago doesn't make them?
20180201_164302.jpg
Cased Potentiometer from RapidLed
20180103_190627.jpg
I started buying my parts early Dec before the Gen 2 were released Always trying to find the best price on everything.
33 strips 1 foot Bridgelux Gen 1
powered HLG-480H-24B I plan on powering more strips at a later date.
If I crank it up to full power I'm still less than 100%
Going to add some Far Reds to a center strip to put the girls to sleep faster.
All hung up
20180302_234108.jpg
I made lots of mistakes lol but it's up and running :)
Now I want to build another one. lol
Cheers
CCG
 

Attachments

Last edited:
Canadain Closet Gardener

Canadain Closet Gardener

Well-Known Member
boostedhonda said:
Does anyone supplement with monos for added reds and uv? I recently added the 8 photo red, 8 620-630 red and 2 uva to my fixture ( pictured above) and was wondering if anyone has done anything similar and what their results were?
Click to expand...
I added a far red puck to my flower light. I think it really helps put the girls to sleep. Going to add far red chips to my latest build. Waiting for those new pucks from growmou5 to be instock at rapid then I'll place my order for the reds
Cheers
CCG
 
InTheValley

InTheValley

Well-Known Member
InTheValley said:
4 luminus cxm,
2xhlg-185H-C1400B
sonoff 4chanpro
growmau puck
\
runs 345 watts with no Pot,
Click to expand...
Center
300watts- 51,000 lux @ 18inches
250watts- 40,000 lux @ 18
200watts- 32,000 lux @ 18
150watts- 24,000 lux @ 18
100watts- 15,000 lux @ 18

Direct under COB, @ 300watts @18inches.

41,000 lux ( 3500K )
44,000 lux (4000K)

Between COBS, outer perimeter ( 24inch box )

40,000 Lux

conclusion,

637 PPFD at 18inches using Lux/par conversion of 69,
 
[]D[][]\/[][]D

[]D[][]\/[][]D

Member
Very cool thread, I'll add my garbage:

I am using 5 unbranded no-name chinese "full spectrum" 70w COB chips that cost under $5 each. Most bare chip, one I am experimenting with lensed.

With the 60 degree lens I can cover a 10" diameter area with ~65k lux with good penetration at a distance of less than 10".
With the bare cobs standing alone I can get ~45k lux across a ~1 square foot area.

I'm not sure what I prefer, I think bare may be the better choice.
The frames are just 3d printed, I wanted to enclose everything and the frames allow me to attach the lens easily.

4/5 lights are wired in parelell and are powered by a single cheap "600 watt" CV/CC power module, running at 34 volts.
Which is powered by a cheap 24v DC power supply.

20180225_045455.jpg g.png
 
You must log in or register to reply here.
Top