Pictures of your DIY lights - Post your pics!!!

Stephenj37826

Stephenj37826

Well-Known Member
GrnZ32 said:
just when i was getting ready to retire the old air-cooled hoods... although the final product sounds very tempting i just dont have $1250 to drop on a light anytime soon.
Click to expand...
That price is for first 10 units. Just trying to get it out there. I will have final hoods this week. I took it to a local hydro store and they want a display unit asap. It seems to be everything the lec should've been imho.
 
testiclees

testiclees

Well-Known Member
Stephenj37826 said:
If you look at the chart rahz has put up to me spreading the light more evenly seems very logical. I would run it where center is no more than 900. That way the outer stuff gets more of the light to help have a better overall harvest.
Click to expand...
please take a look at my setup and offer an opinion on my spacing?

in the pic both ends have 2x 3590 , 3500k 72v @.7 so same as you about 50w per cob, 56% efficient

The middle part is an optic led with 4 vero29 @~80w per cob, 40% efficient. (uvb tube in center)

The closest spacing is about 12" the furthest is about 17,18"
8-18 flower room.jpg
 
Stephenj37826

Stephenj37826

Well-Known Member
In that situation I think you have everything set up the way I would. The center plants are farther away and ends are closer. The tilt on the fixture doesn't seem necessary to me because you are pushing more light on the left side twords the wall. I would raise the right side up until level. Without lenses the spread is pretty fast so I'd say 12 inches is great actually. Just check for signs of heat stress or bleaching.
 
hippee

hippee

Well-Known Member
late to the dance but not to the party 2- 4500k,6- 3000k cree 3070's,8-meanwell 60-1400's, and a 30-12 for the cpu fans,nothing real fancy just meat and potatoes.Thanks to all, for the reseach and ingenuity that you put into this,I certainly wouldn't have been able to do this without you.SAM_0022.JPGSAM_0024.JPG SAM_0027.JPG SAM_0031.JPG
 
Growmau5

Growmau5

Well-Known Member
@hippee I like your design and attention to detail , especially the clean wiring. All you need is a screw driver to take care of a driver failure.

Can you tell us a little more about the COB covers you have there? Did you fabricate the alum rings? what kind of glass covers the cobs.
 
hippee

hippee

Well-Known Member
Growmau5 said:
@hippee I like your design and attention to detail , especially the clean wiring. All you need is a screw driver to take care of a driver failure.

Can you tell us a little more about the COB covers you have there? Did you fabricate the alum rings? what kind of glass covers the cobs.
Click to expand...
no glass covering the cobs and the rings are made of stainless steel they came from a drop ceiling out of an elevator wish I had more for the other one I am building now
 
Tim Fox

Tim Fox

Well-Known Member
testiclees said:
please take a look at my setup and offer an opinion on my spacing?

in the pic both ends have 2x 3590 , 3500k 72v @.7 so same as you about 50w per cob, 56% efficient

The middle part is an optic led with 4 vero29 @~80w per cob, 40% efficient. (uvb tube in center)

The closest spacing is about 12" the furthest is about 17,18"
View attachment 3481794
Click to expand...
I really dig your light man, but you know that already, haha, I have moved my cobs to 10 inches over my top colas ,, but then again I am only running 2 cxa's after 12 hours on the leave and plants look ok, I wont go any closer though,
 
salmonetin

salmonetin

Well-Known Member
...thanks a lot Guod :hug:.... ahhh okok...they call it digital watt power....
...better for my pov... lot of more options to search too...;)...

:peace:

Saludos
 
Last edited:
kmog33

kmog33

Well-Known Member
robincnn said:
@kmog33 Nice diy on that old Chinese panel
I am not sure if those corner COB's are losing light to the front panel. from the pic seems like a lot of light hitting sides of light front panel. Not sure if an F13838_ANGELINA-XW reflector can fit there. If it does it might help.
Click to expand...
Thanks. I was mostly just trying I get this one to run, I'll be cleaning it up now that I'm getting a few more cobs.
 
You must log in or register to reply here.
Top