Pictures of your DIY lights - Post your pics!!!

So after doing some digging, if I were to do this, I would have used the 4 ft strips as they're only $56 compared to 2' at $31-33. That savings would near pay for half the driver. And it's the same build exactly just one board per heatsink instead of 2 .
Which 4ft strips.....? Lm301b?
 
So after doing some digging, if I were to do this, I would have used the 4 ft strips as they're only $56 compared to 2' at $31-33. That savings would near pay for half the driver. And it's the same build exactly just one board per heatsink instead of 2 .

Now you're giving me advise?:wall:

You're always giving advised based off assumptions or what youve red. I actually own and have done extensive testing on every samsung strip on the market. I know what im doing.
 
Now you're giving me advise?:wall:

You're always giving advised based off assumptions or what youve red. I actually own and have done extensive testing on every samsung strip on the market. I know what im doing.
Since when did me stating what I'd do if I were to build something similar to what you did, giving you advice? We all know you know what you're doing, fella. Don't fret.
Your username is pretty telling.
 
Last edited:
Ever tried the acylic cover over quantum boards to protect from splashed water/dust etc?

The MIGRO channel was using one when testing it, made me think it might be a good idea. Any thoughts?
 
24 vero 18's powered by 4 hgl-185h-c1050 meanwells. Six 2700k Twelve 3000k and 6 3000k
20150518_180209_zpshyblz4uy.jpg

20150518_161743_zpsamkpasb2.jpg
This is amazing! It looks like your grow is doing very well with that lighting.
 
Some updates to my 5x5 space. lighting wiring tidied up and ran to remote drivers using multiconductor SOOW cable. 6x QB288s and 4x Elite96s controlled with a sonoff 4ch pro, soon to be meshtek controlled for dimming.
 

Attachments

  • lightsbottom.jpg
    lightsbottom.jpg
    5.1 MB · Views: 76
Back
Top