Poormans super closet muwahahahahahaha!!

BigBudzzzz

Active Member
so once done all this next is too add your co2 system i put in 3 bottles cause im growing 6 plants so 2 plants to 1 bottle . first rinse and dry bottles then take tops drill two holes just the size of your tubing and cut tubing accordingly to the length you need to reach your plants , then glue tubing with hot glue to seal it then add 1 1/2 tbsp of activated yeast and 3/4 cup of sugar then add warm water and sake very well then attach all tops and let sit for about 10 minutes then you are going to test it to make sure it is producing co2. to do this your going to get a cup of water ( clear glass ) and put your tubes into the water and wait for bubbles to start bubbling out of the tube once you see this success and just put into closet and hang tubing into the foiliar of your plants like below View attachment 1821192here are the results of success bubble actionView attachment 1821194View attachment 1821195View attachment 1821196here is the placement of the bottles in the closet also above is a fan ( 2nd optional fan ) i use this for foliar movement and to push around the co2 in the canopy View attachment 1821197View attachment 1821198View attachment 1821199View attachment 1821200View attachment 1821201and there you have it that is how i did my POORMAN'S SUPER CLOSET....... ohh you can also buy a temp humidity monitor to help dial in the closet for best results from your plants . So if i forgot something or you would like to know more or need clearing up on what i have done here please post away or pm me thnx and happy growing :weed: :clap:
Im gonna try this.
Trust me buddy you'll deffeniatly see a big difference in growth and overall health
Ok, I've tried it and and my plants are blowing up! At first I wasn't sure if it was working or not. When my plants started really looking good I figured lets test the CO2 output on from this jug. I hooked up my test device and couldn't believe I got 4.2%. OK two day'z ago i was amazed at that until I tested it today. IT WAS 7.1%!! WTF, ARE YOU SERIOUS??!!!:shock:

I only put 2 cups of sugar and 3 packs of yeast in and thats all. I just keep shaking it and squeezing it when the fans are off during the dark periods. Since the grow room is also the smoke room every time I go hit a blunt I shake it up and squeeze it a couple of times. The first couple days I was skeptical until I looked in one of the plants I had ran a hose to and seen a cake rising in my FUCKIN plant. SO BEWARE, PUT THAT DAYAM HOSE WHERE IT CANT SPIT ON YOUR LADIES!! It spits and sputters all over the place but if I can get 7% CO2 with sugar and yeast then I can put up with an occasional Bake Sale, LOL! :mrgreen:

View attachment 1872006View attachment 1872007View attachment 1872008

I put one of my extra fish bublers on it and now my tent really smells like rising dough! :bigjoint:

View attachment 1872840

[video=youtube;UEJdC16vTxQ]http://www.youtube.com/watch?v=UEJdC16vTxQ[/video]
 

0calli

Well-Known Member
That's great to hear pal nice job + rep for you
Ok, I've tried it and and my plants are blowing up! At first I wasn't sure if it was working or not. When my plants started really looking good I figured lets test the CO2 output on from this jug. I hooked up my test device and couldn't believe I got 4.2%. OK two day'z ago i was amazed at that until I tested it today. IT WAS 7.1%!! WTF, ARE YOU SERIOUS??!!!:shock:

I only put 2 cups of sugar and 3 packs of yeast in and thats all. I just keep shaking it and squeezing it when the fans are off during the dark periods. Since the grow room is also the smoke room every time I go hit a blunt I shake it up and squeeze it a couple of times. The first couple days I was skeptical until I looked in one of the plants I had ran a hose to and seen a cake rising in my FUCKIN plant. SO BEWARE, PUT THAT DAYAM HOSE WHERE IT CANT SPIT ON YOUR LADIES!! It spits and sputters all over the place but if I can get 7% CO2 with sugar and yeast then I can put up with an occasional Bake Sale, LOL! :mrgreen:

View attachment 1872006View attachment 1872007View attachment 1872008

I put one of my extra fish bublers on it and now my tent really smells like rising dough! :bigjoint:

View attachment 1872840

[video=youtube;UEJdC16vTxQ]http://www.youtube.com/watch?v=UEJdC16vTxQ[/video]
 

0calli

Well-Known Member
Panda wrap gives 98 % reflection Mylar is only I remember reading like 75% reflection cause it absorbs light as you can see when you hold it up to a bright light you can see through it
 

mRIZO

Active Member
mylar is 92-97% reflective
panda wrap from what i can find is just black/white plastic. reflectivity of 75-90%
I use something i've never seen again but it's like panda wrap i guess.
Its mirror on one side and flat white on the other.
i find the white side wayyyy brighter.
 

RollUpMikey

Well-Known Member
mylar is 92-97% reflective
panda wrap from what i can find is just black/white plastic. reflectivity of 75-90%
I use something i've never seen again but it's like panda wrap i guess.
Its mirror on one side and flat white on the other.
i find the white side wayyyy brighter.

Look at the obvious statistics you just posted yourself.
The wannabe Panda Film you're using only appears brighter to the human eye.
Maximize your lumens, go with Mylar.
 

mountainboy

Well-Known Member
Only problem I care to comment on is the A/C set up. You have the intake of the A/C blocked. you should have the whole face of that unit in the box. The bottom half of the unit is for intake,the part with the filter in it, there is a temp prob behind that filter on the cooling fins and tubes,you will get colder air and better results if you let that thing breath. Its exhaling,but its not inhaling. If you dont want the whole face of the A/C in the cab, put it further away from the cab,and just duct the cold air in there, but let that thing breath.It must be cycling all the time,or freezing up the coils alot.
 

0calli

Well-Known Member
Nope go back and take a look there is a intake for the ac but it's only 1/3 the intake size but it is there I like it small because it has a very powerful intake
Only problem I care to comment on is the A/C set up. You have the intake of the A/C blocked. you should have the whole face of that unit in the box. The bottom half of the unit is for intake,the part with the filter in it, there is a temp prob behind that filter on the cooling fins and tubes,you will get colder air and better results if you let that thing breath. Its exhaling,but its not inhaling. If you dont want the whole face of the A/C in the cab, put it further away from the cab,and just duct the cold air in there, but let that thing breath.It must be cycling all the time,or freezing up the coils alot.
 

mRIZO

Active Member
whoa, whoa, whoa. Im set up, happy and have plenty of light to spare.
g h e t t o but working just the same.
i was just pointing out that his mylar and panda film numbers were reversed.

-does the A/C not push warm air out into your bedroom?
my unit creates a lot of heat on the back side...
 

0calli

Well-Known Member
Ohhh yes it creates heat but it's winter here and I haven't used my oil heat yet lol

But I'll se of I can find the stuff I bought said 98% reflection on it
 

0calli

Well-Known Member
Nope my bad it reflects 94% and is called orca film not panda film but it touted as the best out there now
 

420built240

Active Member
Good Afternoon,

I am growing my medicine in a similar closet setup, But i am worried about the humidity lvl. I have a cool mist humidifier.
-- How far should this be from my HPS bulb? If the cool mist touches the bulb will it burst?
-- Should the humidifier be in the same room?

I wanted to say that the grow closet looks great from what we can see on the pictures. I have used the same materials you have here, And love the high quality pictures you are providing.

Thank you for keeping this website alive!

-X
 

0calli

Well-Known Member
IMO I would not put a mister or any condensed humidity in the room while lights on especially hps but what are your humidity levels ? And they can be controlled easily with outake and intake fans
 
Top