Prepetual Ebb & Flow

drgreentm · Feb 16, 2011

and here is the 4 little plants that where cut down and drying now. little early but i dont much care i like a more relaxed high anyway.

DumpsterKeeper · Feb 16, 2011

Them's some fat colas. I'm hopin mine turn out that dense this time around. Do you think I'll notice a difference between growing with CFL vs HID?

drgreentm · Feb 16, 2011

DumpsterKeeper said:
Them's some fat colas. I'm hopin mine turn out that dense this time around. Do you think I'll notice a difference between growing with CFL vs HID?

o man a huge difference!! dont get me wrong cfl's are great and work very well but the density and size will amaze you. im telling you once you get hid's you will never look back lol.

DumpsterKeeper · Feb 16, 2011

Hehe, good news for me, then. I was surprised at how dense my Skunk buds turned out under CFL, but I had kind of a crazy setup so they got a lot of light from every angle.

bassman999 · Feb 16, 2011

drgreentm said:
i see man i have never used peat pellets for cloning i just use rapid rooters and a humidity dome/propagation tray and have always used this method since i first started growing and had at least 90% success rate. i use clonex rooting gel with a tiny bit of ph'd tap water in the tray and it usually takes about 2 weeks for them to have some good roots established. the whole setup is only like 25 bucks and works good temps are a big thing to if they get to cold or to hot it can take allot longer to see roots. i have tried aero cloner and bubble cloners as well and got stuck in a rut actually when i lost a batch in each (2 batches, 60 total) and just couldnt seem to clone anymore now im back to my old method and they are looking great finally.

do you use rockwool cubes in that tray?

drgreentm · Feb 16, 2011

bassman999 said:
do you use rockwool cubes in that tray?

nope just straight rapid rooters for cloning they just slip in another tray that goes in the tray and when they are rooted straight to the hydroton

bassman999 · Feb 17, 2011

drgreentm said:
nope just straight rapid rooters for cloning they just slip in another tray that goes in the tray and when they are rooted straight to the hydroton

so it has a rack inside the tray to hold the rooters in?

drgreentm · Feb 18, 2011

bassman999 said:
so it has a rack inside the tray to hold the rooters in?

yup exactly whats going on i actually harvested 2 of my big girls pics to come tomorrow. (jack daniels has me by the balls tonight lol). all i have to say is 2 where a pound wet so about a 1/4 pond dry from 2 still got one more going.

bassman999 · Feb 19, 2011

drgreentm said:
yup exactly whats going on i actually harvested 2 of my big girls pics to come tomorrow. (jack daniels has me by the balls tonight lol). all i have to say is 2 where a pound wet so about a 1/4 pond dry from 2 still got one more going.

Cool glad to find that you narrowed down the best way to clone to that will save me frustration, and congrats on the harvest. Hope it is a great smoke!

DumpsterKeeper · Feb 19, 2011

I have a lot of single seeds that I'd like to keep going with, so I think I'll give your cloning method a shot. Grats on the QP, I'm hoping to pull a lot more weight from my tent this time around and it's encouraging to see other people's results.

drgreentm · Feb 19, 2011

DumpsterKeeper said:
I have a lot of single seeds that I'd like to keep going with, so I think I'll give your cloning method a shot. Grats on the QP, I'm hoping to pull a lot more weight from my tent this time around and it's encouraging to see other people's results.

thanks bro i actually just weighed the 2 plants i harvested today and they are pretty dried (i live in the desert) and they are about 5 and 1/4 oz. I think it will be about a little under 5 oz's all together it will be about 1/2 lb off 4 very small ones and 3 good ones with the added light and the pruning this is very good for me, if the plants can pull 2 oz's each with 16 plant harvest every 4 weeks it will be around 2 lbs every 4 weeks

drgreentm · Feb 19, 2011

ok guys here are the pics finally. i couldnt upload pics for a while but here they are.

here is most of it freshly manicured

here is the biggest nug in my opinion

here is hte heads you can see how i topped

the biggest girl

the other heads

DumpsterKeeper · Feb 19, 2011

Nice manicure, Dr Green. Do you air dry until the stems are completely brittle, or do you start curing earlier?

drgreentm · Feb 19, 2011

DumpsterKeeper said:
Nice manicure, Dr Green. Do you air dry until the stems are completely brittle, or do you start curing earlier?

im hang drying them for about 3 days there are still a little wet at that point then i de stem them and lay them in a leveled net basket for another few days they are pretty ready by then. the stems will still bend but crack not break thats when they go in the jars.

drgreentm · Feb 20, 2011

ok so i built yet ANOTHER aero cloner (tomicmart3000,s specs on his thred via https://www.rollitup.org/hydroponics-aeroponics/407968-jock-horror-3-week-perpetual.html and much thanks to him) and thinking it will be much MUCH better. havent taken any clones in it at the moment i rooted clones in rapid rooters and going to veg them in the new machine. i also had to take a few photos of my WW mom and im just amazed at how she is gtowing at the moment.

bassman999 · Feb 21, 2011

drgreentm said:
ok guys here are the pics finally. i couldnt upload pics for a while but here they are.

here is most of it freshly manicured

here is the biggest nug in my opinion

here is hte heads you can see how i topped

the biggest girl

the other heads

Great looking budz!!

drgreentm said:
ok so i built yet ANOTHER aero cloner (tomicmart3000,s specs on his thred via https://www.rollitup.org/hydroponics-aeroponics/407968-jock-horror-3-week-perpetual.html and much thanks to him) and thinking it will be much MUCH better. havent taken any clones in it at the moment i rooted clones in rapid rooters and going to veg them in the new machine. i also had to take a few photos of my WW mom and im just amazed at how she is gtowing at the moment.

Man those buckets are doing Great!!

Indefinately · Mar 24, 2011

Hey Dr,

I have left the plant hanging for a week now.
What's the negative if I leave them there for too long?

Nice Buds!
They look awesome...

drgreentm · Mar 24, 2011

Indefinately said:
Hey Dr,

I have left the plant hanging for a week now.
What's the negative if I leave them there for too long?

Nice Buds!
They look awesome...

thanks man
if left to long they will usually be to dry and not cure properly, if its only been a week you should be ok depending on the humidity in the hanging room, mine dry fast cause i live in the desert so we have little to no humidity.

drgreentm · Mar 24, 2011

bassman999 said:
Great looking budz!!

Man those buckets are doing Great!!

its been a little while but here she is now really looking good lol

drgreentm · Apr 3, 2011

whats up everybody still following along i started a new thread here is a link https://www.rollitup.org/hydroponics-aeroponics/421632-6-400-s-4-flood.html
got the rest of my equipment and almost got all 4 trays full pop in and check it out.

Prepetual Ebb & Flow

Well-Known Member

Attachments

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Attachments

Well-Known Member

Well-Known Member

Well-Known Member

Attachments

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Attachments

Well-Known Member

Similar threads