Questions 4x4 scrog

KonopCh said:

Just amazig. How long veg and what was yield under 150W as I undertand?

Click to expand...

Thanks, that finished one got beat up, my pump air locked while I was away and she dried out completely for about 5 days, some how didnt die but it happened about 3-4 weeks into flower and really hurt her bad so I didnt get the yield I was expecting. This next one around should be a little better. She only put out a little over half an elbow, it’s the least I’ve yielded from a 3x3 scrog.

This one is not a very dense flower either but has an amazing terp profile and it’s very strong so it’s worth it. Hoping for 3/4 of an elbow on this one but we’ll see! I only scrog keepers now after I’ve ran them through a regular run, learned that lesson.

As to veg time it’s hard to say, that one may have been about 9 weeks, I’ll hold them in veg and just hack branches off until I have room in a flower tent so sometimes they’ll be in veg for ever, sometimes I have room and I’ll carry them right into flower when they are ready.

Cletus clem said:

Bben wondering lately how the samsung strips compare to quantum boards in output and cost. QB on amazon 2 packs for $150. So, 2, 2 packs on 2 hlg-240h-c2100s compared to the setup you described? Or, 4 packs of QB 132, on 2 hlg-240h-c1750s. The 4 packs are $133.

Click to expand...

Same exact diodes. Four foot double row strip has the same diode count as the QB 288 board - for a pricetag of only $48

Single row strips are 144 diodes compared to the QB -132 (which has 132 diodes) - for only $28

nfhiggs said:

Same exact diodes. Four foot double row strip has the same diode count as the QB 288 board - for a pricetag of only $48

Single row strips are 144 diodes compared to the QB -132 (which has 132 diodes) - for only $28

Click to expand...

I wanted the hlg 240-48A am I correct?

grouch said:

How does the flow through worm bin work? Red wigglers? Do you feed them to your fish too?

Click to expand...

so there's 3 totes total the bottom one is the sump. The middle one is were the filter floss is and the third tote is were the worms and the compost is made. I just ran the outlet from the fish into the sump. It gets pumped from the sump up and is diverted back to the top of the compost and out to the plants, I add the Bactria and fungus into the compost and it just flows through the system ... It's just a prototype but the plants are green and growing. I'm currently battling fruit flies, but I've got some bacteria called bti on the way, that is supposed to attack there larve and kill them When it gets here I plan on just adding it to the compost.

Jburns111 said:

I wanted the hlg 240-48A am I correct?

Click to expand...

A has a built in potentiometer for dimming. B has a remote dimming lead for a pot, pwm dimmer or a controller. Ypu could also use a thermistor on the dimming lead. In the event of over heating, the thermistor would dim the lights as the temp rises. Sort of an insurance policy

Jburns111 said:

I wanted the hlg 240-48A am I correct?

Click to expand...

Yes, that's what I would use.

Wont the type a driver's only dim to 50%?