BlazedAndConfused
Well-Known Member
So I'm working in an 8' by 11' flower area, 4x2 closet tent for veg. Currently I have a 400w MH for the 4x2 tent, with 2 6" duct boosters (not full size inlines) one for pulling fresh air from the bottom of the tent and one to cool the 400w in a cooltube stretching about 8' to a window for fresh air and then directed into the ceiling out of the other side.
I have a 1000w in an adjustawing and a 1000w metal halide hanging vertically for some fucked up hermie looking foxtailing plants, They are about 6' at a 7' ceiling and we made the mistake of letting them keep going but just going to trash them for hash. I plan on jerry rig attaching a cool tube to the adjustawing so that it can be air cooled as well. My question is will a 12" 1000+ cfm fan be just enough to cool these three or is it overkill?
Mind you the lights will not be all in a row, rather two in a row right off the fan from a y connector and the other side running a bit to the right through the other 600w and out the window. This is going to be at least 12-13' worth of ducting to be ran and im worried that im going to need multiple expensive fans just to cool the lights.
Also, is it better to pull air over the lights or blow the air towards them?
Appreciate the advice in advance im trying to get on the way to making unstressed plants because the hermies can piss a guy off ya know Im open to any and all suggestions
I have a 1000w in an adjustawing and a 1000w metal halide hanging vertically for some fucked up hermie looking foxtailing plants, They are about 6' at a 7' ceiling and we made the mistake of letting them keep going but just going to trash them for hash. I plan on jerry rig attaching a cool tube to the adjustawing so that it can be air cooled as well. My question is will a 12" 1000+ cfm fan be just enough to cool these three or is it overkill?
Mind you the lights will not be all in a row, rather two in a row right off the fan from a y connector and the other side running a bit to the right through the other 600w and out the window. This is going to be at least 12-13' worth of ducting to be ran and im worried that im going to need multiple expensive fans just to cool the lights.
Also, is it better to pull air over the lights or blow the air towards them?
Appreciate the advice in advance im trying to get on the way to making unstressed plants because the hermies can piss a guy off ya know Im open to any and all suggestions