Recommend $300 budget light..... For a friend

maxlev

Well-Known Member
This is festering nicely
The bloke with the flathead reckons it is as efficient as the injected twin cam
Embrace the dark ages & cream your why fruntz
 

Kingrow1

Well-Known Member
That's exactly my point.
Sorry i read what you said wrong, my bad.

I dont mind if eventually im wrong on leds but lets all get to one opinion not ten. Ppfd is not the great measure that others would have, its even more complicated to say there is no perfect spectrum in the world yet :-)
 

Prawn Connery

Well-Known Member
I honestly couldn't give a fuck about PPFD. I only care about end results. If I can produce the same yield - and/or a better quality product - from 400W vs 600W, then that is what I will do. Initial set-up costs of LED can be offset not only by the power savings, but not having to buy replacement bulbs every six months or so. But if you're prepared to do it yourself, a decent full-spectrum LED lighting system can now be put together for almost the same cost as a decent HPS system. I'm talking quality bulbs, digital ballast and reflector, single or double ended.

Incidentally, I've been playing around with different LED systems in different sized areas, and these 11-week sativas yielded just under 16oz under 200W of Samsung LM561s - twice (15oz the second run). That is what prompted us to try them in the commercial room I posted earlier.

IMG_0673.JPG
 

Prawn Connery

Well-Known Member
For the sake of disclosure, there were actually 400W in that room, but the other half was being used to grow different strains. So there was some overlapping light.

IMG_0615.JPG
 

TPTB73

Well-Known Member
I can order from regular amazon no problem just a few bucks Extra for shipping no big deal I appreciate your help!
Okay, here are the links to everything you will need. As this thread has been going, they sold out of the QB132s. There are ONLY SEVEN QB120s LEFT (packs of four) in 3000k, which will make some beautiful buds. So, I would suggest you hurry.

Four QB120s:
https://www.amazon.com/Horticulture-Lighting-Group-Quantum-Boards/dp/B077KHMZTC?crid=9L54FBLI9L7F&keywords=quantum+board&qid=1535714531&sprefix=quantum+board&sr=8-2&ref=mp_s_a_1_2

Driver (ELG-240-24A):
https://www.amazon.com/PowerNex-ELG-240-24A-Single-Output-Switching/dp/B01LWE0AQ3?keywords=elg-240-24a&qid=1535714741&sr=8-4&ref=mp_s_a_1_4

Wiring:
https://www.amazon.com/Southwire-64162122-Conductor-Thermostat-Power-Limited/dp/B0069F4H0E?crid=2UXHMJLT6YGVD&keywords=18+awg+thermostat+wire&qid=1535714998&sprefix=18+awg+ther&sr=8-2&ref=mp_s_a_1_2

Wago connector (goes between the power cable and driver input, and also goes in between the output of the driver and the quantum boards which will be wired in parallel, which means that each board's positive and negative will be connected to the driver's positive and negative (I couldn't find these as singles on Amazon, only in packs of 10, so if you can find them elsewhere you could get fewer for cheaper, however I'm trying to stick to only Amazon since you are in Canada and I'm not sure where else you can order from):
https://www.amazon.com/Wago-221-415-LEVER-NUTS-Conductor-Connectors/dp/B06XH47DC2?keywords=wago+connector&qid=1535715218&sr=8-17&ref=mp_s_a_1_17&th=1&psc=1

Power cable (cut the female end off and then connect it to the input of the driver):
https://www.amazon.com/C2G-Cables-Universal-IEC320C13-Compliant/dp/B00005113L?keywords=power+cable&qid=1535715376&sr=8-5&ref=mp_s_a_1_5

Hangers:
https://www.amazon.com/Bayyee-Hanging-Aquarium-Lighting-Stainless/dp/B01LWYAQ8E?keywords=ratcheting+hanger&qid=1535715849&sr=8-5&ref=mp_s_a_1_5&th=1&psc=1

I would also recommend getting a power strip/ surge protector that has a reset button on it simply as an extra layer of safety. It's only a few more bucks and why not have that extra layer of safety?


Also, in the case that you wait too long and all of those boards sell out. You have other options in the same price range ($169). For instance, check out this link, it is two of the qb288 boards with heatsinks. These two boards will equal four of the qb132s or the qb120s. They would require different drivers, so if you go this route, let me know and we'll do it again. I don't mind this at all. For me, it's fun to put these things together.

https://horticulturelightinggroup.com/collections/quantum-boards/products/qb288-v1-slate-2-single-combo


There is also this one, for a little bit cheaper ($149) but the only issue would be that the heatsink is one big piece instead of two separate pieces, meaning you can't separate the lights and have as much flexibility as to where you put them. But it would still work.

https://horticulturelightinggroup.com/collections/quantum-boards/products/qb288-with-slate-2-double-triple
 
Last edited:

Kingrow1

Well-Known Member
I honestly couldn't give a fuck about PPFD. I only care about end results. If I can produce the same yield - and/or a better quality product - from 400W vs 600W, then that is what I will do. Initial set-up costs of LED can be offset not only by the power savings, but not having to buy replacement bulbs every six months or so. But if you're prepared to do it yourself, a decent full-spectrum LED lighting system can now be put together for almost the same cost as a decent HPS system. I'm talking quality bulbs, digital ballast and reflector, single or double ended.

Incidentally, I've been playing around with different LED systems in different sized areas, and these 11-week sativas yielded just under 16oz under 200W of Samsung LM561s - twice (15oz the second run). That is what prompted us to try them in the commercial room I posted earlier.

View attachment 4189969
Your setup is flawed with the lights a little, only standard comparisons here are short vegs, where 1 watt oer gram come from.

Interesting to know more when you tally up, many have performed this experiment here led/hps but members flawed theie results.

Still no led cob quantum has shamed the top hps growers here so thats where i stand, why hps wven gets sold would be a question many have.
 

Prawn Connery

Well-Known Member
I'm sorry, but I have no idea what you're trying to say. I pulled 1.4+gpw from my 1200W vertical HPS set-up for over a decade. 1gpw is nothing.
 

stevo1209

Active Member
Light will be used for autoflowers in a 3x3 space. Just looking to help a friend out to give a quality product link to show them, and I'm not to experienced with autoflowers and automated dtw.

I am biased to a 600w hps/mh setup, but they are not to keen on that choice because of the ballast noise

Cheers to any links to suggestions in this price range
2 vipar spectre 450w+ if u want LEDS

Otherwise 2x600w or 400w hps

Never had a problem with my digital ballasts fans must be lucky.
 

Olive Drab Green

Well-Known Member
2 vipar spectre 450w+ if u want LEDS

Otherwise 2x600w or 400w hps

Never had a problem with my digital ballasts fans must be lucky.
I used to really dig Vipars in my “freshman year” here. But, for the same price ($212 for a 135w which will SMOKE any of the Vipar panels, even the higher wattage ones; $175-200 is what the ViparSpectra was, I believe), there’s just no reason to choose them over QB288 V2s. And 600w of HPS would obviously be less efficient than 270w-300w of QB.
 

Kingrow1

Well-Known Member
I'm sorry, but I have no idea what you're trying to say. I pulled 1.4+gpw from my 1200W vertical HPS set-up for over a decade. 1gpw is nothing.
Dude im just going to leave you there, clearly your led buds are piss small compared to the hps and the only side of your led grow that is decent is the side that is on the hps side and not the side against the wall.

Dont understand grams per watss!? Obviously not an older member here and again its simply a scale us older growers used here heavily before you came along, well unless ive missed something in the years here.

Another issue would be penetration.

I go off s'soon as noobs keep quoting that 50% yeild increase in leds to hps, pure fakery and you really are the hater on this site because clearly your hps is kicking those skinny leds all over the place.

Gonna have to troll me because your the worst kind i meet here :-)
 

Kingrow1

Well-Known Member
Why in the hell would he get blurples when he can get quantum boards for the same price? Blurple is old tech.
Because blurples are cheap as hell on ebay and Amazon, why does he need new tech if old still works? Probably not really anything to anyone with first world electric prices and for less cost you can yeild more bud in a bigger space.

Growers here are lapping up the blurples.... to the shock of the new tech led fuck hps crew :-)
 

Big Green Thumb

Well-Known Member
Dude im just going to leave you there, clearly your led buds are piss small compared to the hps and the only side of your led grow that is decent is the side that is on the hps side and not the side against the wall.

Dont understand grams per watss!? Obviously not an older member here and again its simply a scale us older growers used here heavily before you came along, well unless ive missed something in the years here.

Another issue would be penetration.

I go off s'soon as noobs keep quoting that 50% yeild increase in leds to hps, pure fakery and you really are the hater on this site because clearly your hps is kicking those skinny leds all over the place.

Gonna have to troll me because your the worst kind i meet here :-)
Wow, you really are an idiot.
 
Top