Hi I’m trying to switch to bar LEDs for better light distribution I want to get a really good light for my 4x4 tent. I want to keep the light dimmed down for the 4x4 but I’m moving to a bigger space so I need a powerful light for later. I was thinking about getting this light on alibaba. Any recommendation and suggestion is very much appreciated my price range is $1200-$1500
Recommendations on alibaba bar led?
- Thread starter Nycgrown
- Start date
PadawanWarrior
Well-Known Member
With that budget I'd look at the ChilLed. This thing looks sweet. It'll cover more than a 4x4 if you wanna upgrade later. My next light will probably be a ChilLed. The Gavita's are nice too, but I don't think they have a 1000 watt one. I have a code for 5% off the ChilLed lights in case you decide to go that route. I heard HLG is coming out with one too soon.
chilledgrowlights.com
Growcraft X6 - 1000 Watt DIY LED Grow Light Kit
Growcraft Light Spectrum Options Passive Cooling Linear Bar Design Thin Profile – Only 1.375in Tall Rugged T Slot Bar Design Oversized surface area for maximum heat dissipation Remote Power Driver Location Lower your heat load by removing power driver outside grow area Assembly Instructions...
chilledgrowlights.com
Yea I was looking at the chilled tech as well then I saw the video with grand master saying they fixed their numbers I’m looking at the Gavita 1700e as well but I don’t like the fact u have to buy an adapter to dim 12-1500 is my Max but I’d like to get a light on par with those brands for cheaper if possible that why I’m looking at baba
PadawanWarrior
Well-Known Member
Who's this grand master?
I personally wouldn't go the Chinese route if I had the money. All I own for LED so far is HLG, but ChilLed will be my next. Well and a blurple Vipraspectra still unopened in the box I bought before I learned.
@bk78 has had good luck with Meijiu stuff from Alibaba, but I personally prefer to buy American when I can.
PadawanWarrior
Well-Known Member
I wouldn't believe anything I saw on YouTube.
PadawanWarrior
Well-Known Member
I don't see any ChilLed lights, or any strip lights from what I skimmed through. I think they're getting paid by HLG. Again I wouldn't believe much of what guys like this say.
Nappertunity
Well-Known Member
Grand Master Level is the HLG distributor for Canada. So there is a bias.
However, I trust @Stephenj37826 to be a fair and honest guy. He has been very supportive and truthful with his numbers since he entered the field. Sometimes you have to lean on what a company has stood for since their inception.
But I've been wrong before, and I hope I'm proved correct over the years I have left.
However, I trust @Stephenj37826 to be a fair and honest guy. He has been very supportive and truthful with his numbers since he entered the field. Sometimes you have to lean on what a company has stood for since their inception.
But I've been wrong before, and I hope I'm proved correct over the years I have left.
Airwalker16
Well-Known Member
If you plan on moving to a bigger space, you should make your options more focused around 650-900watts. The chilled has optional but its nothing special AT ALL. I'd reccomend geeklight newer geek beast.
https://danklightco.com/ if you wanna order stateside
canope
Well-Known Member
Geekbeast are pricey for a six bar fixture, you can get a 8 bar fixture for cheaper with Meijiu
Roshambizzle
Well-Known Member
He says that last i saw he grows with growers choice tho which is about twice the price so why would he push alibaba if he uses GC?
foreverflyhi
Well-Known Member
Kingbrite on alibaba. Check them quantom bars.
Lots of options. Personally digging the the 301h/b with xpe2 660nm red and iv ir.
You can also save some money by opting for the boards. Cheaper and higher ppfd according to thier results. I would imagine just a smaller and less efficient compared to the bars.
Imo theres not much difference between Chinese and these other american companies. Same shit.
Lots of options. Personally digging the the 301h/b with xpe2 660nm red and iv ir.
You can also save some money by opting for the boards. Cheaper and higher ppfd according to thier results. I would imagine just a smaller and less efficient compared to the bars.
Imo theres not much difference between Chinese and these other american companies. Same shit.