• Here is a link to the full explanation: https://rollitup.org/t/welcome-back-did-you-try-turning-it-off-and-on-again.1104810/

Rosin Tech

Texas(THC)

Texas(THC)

Well-Known Member
ODanksta said:
Lol, dafuq? I just watched two hours of Rosin videos.. this isn't sensible for me tho...
Click to expand...
Dan Kone said:
http://sclabs.com/sample-detail.html?id=102857

85% cannabinoids. 7.218% terps by weight with a broad spectrum of terps. That holds up to the best of the best in any form of extract.

Looks like a pain in the ass to me. I'm not going to go out and make some, but I can't argue with the results.
Click to expand...



its realy not a pain in the ass
with the rosin I can squish a bud and take a dab in under 2 minutes
this is much more sensible than having to vacuum solvent out of your oil just to make it safe enough to smoke

you two need to try it




this is from 1 gram of bubble hash ( .4g )
 
Yodaweed

Yodaweed

Well-Known Member
Texas(THC) said:
its realy not a pain in the ass
with the rosin I can squish a bud and take a dab in under 2 minutes
this is much more sensible than having to vacuum solvent out of your oil just to make it safe enough to smoke

you two need to try it




this is from 1 gram of bubble hash ( .4g )
Click to expand...
How did you get it to form into that slab? When I do bubble it always comes out like a big puddle.
 
bluntmassa1

bluntmassa1

Well-Known Member
Texas(THC) said:
its realy not a pain in the ass
with the rosin I can squish a bud and take a dab in under 2 minutes
this is much more sensible than having to vacuum solvent out of your oil just to make it safe enough to smoke

you two need to try it




this is from 1 gram of bubble hash ( .4g )
Click to expand...
I think I'd rather have a gram of bubble, you know plenty of good shit is left in that .6 and it damn sure can't replace BHO. Like how you going to make it on large scale? Your going to be working all day with a pound of weed and a T-shirt press if not all week, lol. Also how would you go about trim?

Unless someone makes a machine I don't see it being the future maybe for personal use but damn sure not commercial like BHO.
 
francy420

francy420

Well-Known Member
The only people who disclaim rosin have never even tried it. Or made it. I understand a lot of bho'ers are butt hurt but just wait, like I said until someone makes a commercially viable option. Until then it can't be beat for the average Joe to get a good clean dab. But for commercial production no it doesn't make sense yet.

I agree I would rather have the bubble though if it was good. And I don't advocate pressing high grade sift. To me that is killing the already Holy Grail.
 
Texas(THC)

Texas(THC)

Well-Known Member
yeah that was just for the haters
I don't plan on pressing anymore of it
that stuff was some 4* which leaves a residue on a nail

im sure that .6 had a little left inside, since I only pressed it twice.
But then again that extra .6 would probably have been left over on my nail if I would've dabbed it without pressing it
so that's fine with me

IMO with heat, pressure and quality being the only variables in making this, I think it is ridiculous for anyone to think that it cant be made for commercial production

Also who cares if it takes longer? Hell when I make Bho I freeze for 2 days prior to extracting, then purge for 24+ hours.
BHO is not exactly a quick method either
 
Yodaweed

Yodaweed

Well-Known Member
bluntmassa1 said:
I think I'd rather have a gram of bubble, you know plenty of good shit is left in that .6 and it damn sure can't replace BHO. Like how you going to make it on large scale? Your going to be working all day with a pound of weed and a T-shirt press if not all week, lol. Also how would you go about trim?

Unless someone makes a machine I don't see it being the future maybe for personal use but damn sure not commercial like BHO.
Click to expand...
T-shirt press will make larger quanities of it, they are starting to sell it at dispensaries around here in Colorado, Altitude Organic Medicine has it now and calls it SHO (Solventless Hash Oil) they took their top shelf bubble wax and pressed it with a hot t-shirt press they told me from 50 grams of bubble they got 20 grams of rosin. So imo they can increase yield by quite a bit but that was their first run.
 
francy420

francy420

Well-Known Member
Yeah I love how everyone is like it takes too long, but takes them 3-4 days total from start to finish doing bho. Yes I know it doesn't take all your time in that 4 days, but come on.
 
francy420

francy420

Well-Known Member
Just wait in the future there will be a machine that you literally put the whole harvested plant in one end. stalk and all, and out the other comes rosin, dry sift, and edible grade oil. You just select what you want. The machine does the rest. It's the MJ Harvester. Kind of like a combine harvester. And they thought we would have flying cars by now.
 
greenghost420

greenghost420

Well-Known Member
Texas(THC) said:
its realy not a pain in the ass
with the rosin I can squish a bud and take a dab in under 2 minutes
this is much more sensible than having to vacuum solvent out of your oil just to make it safe enough to smoke

you two need to try it




this is from 1 gram of bubble hash ( .4g )
Click to expand...
do you have a special temp you press at? looks like a nice amount came out of that bud.
 
akhiymjames

akhiymjames

Well-Known Member
I know someone that's got a great tech on making nice amount of Rosin. They're making slabs of it and I mean slabs. He said it's a fractional process like dry sift but he didn't go into much detail. I just asked him about how he does it so when he lets me know I'll come back here and let everybody know
 
caherbgrower

caherbgrower

Well-Known Member
I'm running some right now. Just finished the dry sift and now warming up the flat iron. I heard from bubbleman to put the sift in a pressing screen 25 micron and put parchment around that. When you press the oil comes through and any plant material stays in the screen.
 
Last edited:
You must log in or register to reply here.
Top