~~~RV fridge>> Grow cab>> Harvest~~~

HighLowGrow

Well-Known Member
I've been looking for this opportunity for quite some time. Not really looking, but waiting.

My family has been into camping for a long time. Some of the trailers are new and some are old. Well guess what happened several weeks back? One of the fridges went out and I volunteered real fast like to take and dispose of the thing (at my house).

And here we go. I've been working on this project now for the last couple weeks and took a few pics along the way.

So here it is fresh out of the trailer.

11_20_15.JPG 11_20_15a.JPG 11_20_15b.JPG
 

HighLowGrow

Well-Known Member
It was time to start ripping shit out. Shelves, "the cooler fins", and the cooling system. I was trying to figure out where to cut the lines and drain the fluid into the air. Oops did I say that.
Didn't have to. The whole back came off as one. It wasn't as clean as it sounds. Lots of foam to dig out. Friggin messy shit.

11_20_15c.JPG 11_20_15d.JPG 11_20_15h.JPG

Now I needed to fill the hole. I cut a pc of wood to cover the hole and attached it to the plastic with small nuts and bolts.

11_20_15i.JPG
11_20_15j.JPG This will be my growing area. 29"h x 18"w x 14"d
 

Attachments

Last edited:

HighLowGrow

Well-Known Member
I decided I was going to put four 150watt equivs across the top. Actual wattage is 40watts ea. Total 600 watt equiv and 160 actual watts. Total lumens 10,900. Two 2700k and two 6500k. I will most likely be adding additional side lighting.


11_20_15k.JPG 11_20_15l.JPG 11_20_15m.JPG 11_20_15n.JPG 11_20_15t.JPG
 

HighLowGrow

Well-Known Member
Definitely will need a fan or two to exhaust some of this closed in heat. I found a green led fan that looks pretty cool. Bought two but only installing one for now. I wired the lights in parallel so if one light goes out the rest stay on.

11_20_15q.JPG 11_20_15r.JPG 11_20_15p.JPG
 
Last edited:

HighLowGrow

Well-Known Member
There is a lot of light leak. I'll fix it later. This is on each side.

11_21_15d.JPG

Forgot to mention. The holes for the fans and air intakes are made with this. It's 3"s across.

11_21_15g.JPG
 

HighLowGrow

Well-Known Member
Now I have this tonight. Two fans sucking air out and two intakes. All four lights have been on with the fans running for the last hour. It's maintaining 79 degrees inside.

Forgot to mention. The thermostat controller is from my home brew stuff. Works great here. Both fans are hooked up to it. The temp sensor is below the lights. I have the fans set to come on at 75 degrees. They are currently running constantly and holding at 79. House temp is 68.

11_21_15e.JPG 11_21_15h.JPG
 

HighLowGrow

Well-Known Member
This cab is far from finished, but as long as it can hold 79, it's ready in my opinion. These volunteers are over due to be planted. They are all fems. Either AKR, Berry Ryder, or BKRs. Dunno. Found em on my desk.

11_22_15e.JPG

This fridge has three of these adjustable shelves which will makes things easier for sure.

11_22_15.JPG
 

HighLowGrow

Well-Known Member
Let's see what the cab can do as is. These are fem autoflowers

11_23_15a.JPG

This is a nice bonus. There are two of these shelves in the door that are adjustable. They fit 4 red cups perfectly.

11_23_15.JPG

Also this grate is adjustable from top to bottom. Have three of them. Another nice bonus.

11_23_15b.JPG

Here's the freezer section. "Germination Station"?. Nute storage?

11_23_15g.JPG
 

shadow22

Well-Known Member

HighLowGrow

Well-Known Member
Right now the fridge is being used to germ seeds. My room is full of autos and ONE photo (Critical OG Cookies). @dream2003

image.jpeg

Pretty soon here I'll put it in the fridge and flip it to 12/12. I'll document here.

The fridge has not changed. I needed to put it on hold. Time to get going on it again.
 
Top