milowerx96
Active Member
damn 450 hu?
Sentinel climate controller reviews?
- Thread starter TMB77
- Start date
KnowledgeSeeker
Active Member
Really. Then why aren't we all dead?
If you want to start another thread about CO2 then please do so otherwise let's keep this one about the CHHC-1.
milowerx96
Active Member
Ok just got it yesterday. First impression is what a nifty gadget! It does seem a little light weight in the construction. I would like to see the case made a little sturdier. But it does have a 3 year warenty so what ever. Programing seems simple. find the button for the function you want (there all on the front 15 of em) and set up or down. Stats are as follows. Power input volts 100~265 volts, Cirtcit breaker rating 15 A/ 240 v~, Output receptical rating 15 a/ 120 v~/10 A 240~, remote sensor cable length 16 feet, min max operating temp 32-120, min max operating humidity 0-99 rh, temp accuracy 1.8 f, Humidity measurment range 10 - 95%, humidity accuracy +/- 3%, Light sensor sensitivity Adjustable, c02 accuraacy +/- 75 ppm, co2 measurment range 0-2500 ppm, co2 sensor warm up time less than 10 min, computer interface (optional rs 232 / 9-pim D sub, weight / dimentions 8" x 6.5" x 3.5" 5lbs. Works fine so far.
keeger123
Well-Known Member
cause no one ever uses those rediculous co2 levels... do u think those links are blowin smoke?? dont believe me then, ur the knowledge seeker, do ur own investigating. guarentee everywhere u look the info will be pretty much the same...
KnowledgeSeeker
Active Member
Has anyone noticed a difference in temperature readings between the CHHC-1 and a standard Ecoplus Digital Therm/Hygro? I put them right next to each other for 2 hours and the Ecoplus consistently reads 2-3 degrees lower than the CHHC-1. Any one know what the rated accuracy of the Ecoplus or similar device is? The CHHC-1 manual states that the temp is accurate +/- 1.8 degrees. Seems like for this amount of money we should have gotten something that was accurate within a degree but maybe that's just me being overly critical.
milowerx96
Active Member
YOu need to use power relay switches to run high amperage items like A/C units. This is pretty much standard for this sort of thing.
milowerx96
Active Member
You should really pick up a high amperage relay for the A/C and other high amperage items. You don't need the the same brand they are all pretty much the same. They are cheap and will take the power load off of the controller enabling you to run more devices. My controller is working fine I ordered another one to run my Hydrogen LPG Generator. I have been running mine in a 1800 CU ft room with the controller set in fuzzy mode at 1350. It's never more than 200 ppm off unless it's building back up after a ventilation cycle.
milowerx96
Active Member
To power high amperage items with any of these controllers you should use a high amperage relay. its just a plug with a separate power distribution box. it has a piggy back plug and you plug you AC or what ever into the back of the piggy back plug and plug it in to the wall. you plug the other end into the controller. this keeps the draw off of the controller and on the relay.
milowerx96
Active Member
oops sorry about the multiple posts i thought i was on another thread. still kinda new to the forum. forgive me
KnowledgeSeeker
Active Member
How much do they cost? Can you get them at any hardware store (Home Depot, etc.?)
milowerx96
Active Member
They are about $100 bucks at this web site but I know you can find them cheaper.I am sure you could make one also if you were Remotely crafty. You don't need to but the same brand any brand will do. http://www.hydroponics-garden.com/xcat459.html it's the power expaneder I would have found a better deal to link but it is like 5 am here now and I just woke up.
KnowledgeSeeker
Active Member
LOL. 5 am is EARLY! Thanks milowerx. I will shop around and see what i can find.
KnowledgeSeeker
Active Member
My grow room is 10x10x8. I have a 50lb CO2. I've been running my an average of about 1250 ppm. Running at that ppm my CO2 tank lasted about 3 weeks. Seems kind of short for a 50 lb tank but since it's my first grow I have no idea. There are some holes and things that I need to fill and patch but how much CO2 are you using? How large is your room? What ppm are you running? How big is your tank? How long does it last?
KnowledgeSeeker
Active Member
It seemed kind of cold in my room so i put an Ecoplus therm/hygro in the room and put the remote sensor right next to the CHHC-1 sensor and most of the time they are within a few degrees of each other but I've noticed at times they differ a lot (like 6 or 7 degrees difference.) Has anyone else tried comparing readings from other therm/hygro devices to the CHHC-1? I attached pictures from two different times when they varied a lot.
Attachments
milowerx96
Active Member
I gotta give that a try and let you know. the Mmanual sez 1.8 F That seems like alot more.
KnowledgeSeeker
Active Member
Yah, and the tech specs for the ecoplus say temp accuracy is 0.1 degrees Celsius...
The reason it's a big deal for me right now is that I am fighting a case of downy/powdery mildew. Totally sucks. So i've sprayed them down with mildew cure but the environmental parameters to avoid mildew are temps above 76F, RH less than 45%, and no excess nitrogen. So I've got to make sure that my temps are accurate.
If you do get a chance to test yours out that would be keen. I may just have a CHHC-1 that isn't calibrated correctly. The temp readings seem to differ more at lower temps too...
KnowledgeSeeker
Active Member
In case anyone is interested I found some software that will capture readings from the CHHC-1 and exports the data to an Excel spreadsheet. The software install is in Chinese or Japanese but just press the "next" button and it installs fine on Windows XP. The program itself is in English. http://drop.io/whl70rf/
The only thing worse then a moron is a moron who acts like an asshole.
KnowledgeSeeker is correct in everything s/he said, and I can vouch for that because I also run a sealed room (have exhaust hooked up, but never use it).
And I've run my CO2 up above 5000PPMs to kill bugs and my plants (and I) somehow survived (with no adverse effects).
But to the point of the thread, I have a CHHC-1 and it works like a charm - best investment I've made in my grow, IMO.
Check out the link in my signature ("New Setup") to see it in action, if you're interested.
johndoe12345678
Well-Known Member
do i have to un rar it or did u just give me a virus??
I'm not sure what "un rar" it means, but that file looked a little shady to me, so I held off on downloading it - has anyone done that successfully, and also what cord is needed to download info from the Sentinel?
Would I have one lying around, or do I need to run out to Best Buy or something?