SOG growers wanted !!!

paperfetti

Well-Known Member
this is the guy who is like our AL B. on a diff. site response :
I think that summizes the situation very well st0ney, good job with that man!

Id also say that the whole system of nutrients is a delicate balance of +ve and -ve ions, adding a certain element such as Mg usually has the effect of altering the potential with a sudden and drastic availability of the element within solution, the plant uptakes this solution and the problem is further compounded as the plant goes further away from centre...I have read so many growers say "wow the plants have gone really green bafter I added the Epsom Salts" (excess Mg symptoms) then a few days later its "my plant has stopped growing and is starting to yellow in the leaves" (Iron lockout).... as a further example or approach to the overall picture of nutrient solutions think of ph correction....adding ph up (+ve ions) to a solution that you have added too much down ie acid (-ve) to, it shouldnt be done, the whol solution should be dicarded. As it is in DWC, NFT, Dripper,etc etc in hydroponics, if we discard and completly replace our solutions regularly (and use a hydroponics nutrient to begin with) deficiencies will become non existant. Occasionally, and I mean occasionally we will need to add a slight amount of Mg, and it should be fractional, but this should be such a rare situation if the other practises are correct.

Ph drift is a great thing, letting it climb to 5.9- 6.1 isnt going to have an adverse effect whatsoever, in fact the inverse is true, the rise will permit correct iron, potassium and phosphorous uptake and prevent the deficiencies that people claim to be experiencing. This is especially the case during flowering, the PH rise will result in slightly more P being absorbed so the constant battle to keep the PH at 5.5 or even lower I think is a little futile.



Oz
 

grandpabear3

New Member
what did i miss? why are we talking about ph....dammit now i gotta read. i keep mine at 5.8 and correct downward at 6.1-6.3 depending on where it is when i catch it.
 

SpruceZeus

Well-Known Member
Howdy friendly water gardeners. Hopefully you guys can answer some questions for me.
I've been growing in soil for a while and have really taken to it. However, theres been this nagging feeling for a while that i'm just not growing to my potential. If only there were some way i could grow dope quicker and bigger than before...
AHA!!!! HYDRO!
So a while back i went down to my local hydro shop and orange box hardware store and spent a bunch of money. Heres what i purchased.

Elicent 6" fan and cooltube


2 2x4 tables and all the acoutrements: large rubbermaid roughneck reserviors, tubing, fittings, netpots, pumps, and i had some hydroton laying around from a friend who had to leave town.
I also got a "PT CLONER" which is essentially an aerocloner. I'm so tired of fucking around with rockwool. Its either too dry or too wet, grows algea on it and is expensive. Having purchased this machine, i'm sure i could build one myself for about $60. (i paid $200) :wall: In any event, it appears to be working great so i'm not too beat up about it.

Anyhow, I've got my tables pretty much assembled, 1000w hps in the cooltube, and my clones are showing roots. so everything is coming together like madfire now. Theres just a few things i'm not clear on.

I don't want to use rockwool. My thoughts were that i would just be able to nestle roots gently among the hydroton pellets, is this going to be okay or will the plant need more support?

I have some nirvana white rhinos that i am vegging now, i expect the good females to become my mothers for this sog, How large of a clone should i take to ensure a decent yield with no veg time.

It takes about 30 minutes total for my table to fill and drain fully, any thoughts on how often i'm going to have to do this, 2? 3? 4 times a day? more?

How often am i going to want to flush my res?

Also do you guys have any reccomendations for a good, not too expensive EC\PPM meter?

Thanks in advance for all your help, i'm sure i will have more questions, but this is a good start. I'll post more pics or info if required.
Sorry for the x-post, i'm just antsy and want answers. :weed:
 

grandpabear3

New Member
YEAAAAAA get some !!!!!!! I LOVE IT !!! :clap:
and what exactly is it that you love about that comment.....we all work very hard on making this thread as confusing as possible and dont take it lightly when ....oh never mind:finger:

i am a weed baron now, i dont have time to be petty.:leaf:
 

grandpabear3

New Member
Howdy friendly water gardeners. Hopefully you guys can answer some questions for me.
well gheck ya if i can screw my grow up why not your...fire away


btw you have a very nice list of toys there ...sounds well done

I don't want to use rockwool. My thoughts were that i would just be able to nestle roots gently among the hydroton pellets, is this going to be okay or will the plant need more support?
get 5.5-6" square pots (not net pots) and grow 4 per square foot in true s.o.g. fashion. then fill em with hydroton only. that way the roots dont grow together and you can move plants around as needed.

I have some nirvana white rhinos that i am vegging now, i expect the good females to become my mothers for this sog, How large of a clone should i take to ensure a decent yield with no veg time.
about 6-9" is just dandy

It takes about 30 minutes total for my table to fill and drain fully, any thoughts on how often i'm going to have to do this, 2? 3? 4 times a day? more?
start with 2 and go from there....you might want more depending on space and height and whatever else you wanna throw in there....lol


How often am i going to want to flush my res?
i only clean mine out every 2-3 weeks....supposed to do it in 2 but i let it go to 3 and havent had ANY problems ...NOT 1 ...since i started doing that.

Also do you guys have any reccomendations for a good, not too expensive EC\PPM meter?
i use the milwaukee ph meter and it was only 65 bucks and its been working for over a year.

Thanks in advance for all your help, i'm sure i will have more questions, but this is a good start. I'll post more pics or info if required.
Sorry for the x-post, i'm just antsy and want answers. :weed:
sho nuff....keep your pimphabd strong:clap:
 

livesoul

Well-Known Member
Bugs do you grow Sativas or Indicas? My sativas have a 4-6 inch spread between each node. I'm concerned i'm not going to yield much per clone....
 

livesoul

Well-Known Member
On my Jack Herers I am getting something around an inch as far as node density. Sometimes more on the stretchier ones. Since your stuff is 100% sativa then this is what I would expect to be seeing. I haven't grown a 100% sativa but it sure looks like one. Did those little clones stretch into those big fuckers in 3 weeks?

Yeah, its actually only been like 2 and a half weeks. I'm using floranova bloom at 1300ppm.
 

grandpabear3

New Member
Bugs do you grow Sativas or Indicas? My sativas have a 4-6 inch spread between each node. I'm concerned i'm not going to yield much per clone....
i thought i responded to this already....hmmmmm, anyway i grow white widow, it as are almost all strains now is a hybrid. they say it runs about 75% sativa and it stretches like a blonde cheerleader. 30 inches in 3 weeks easy.:o but they fill in at the end.
 

livesoul

Well-Known Member
i thought i responded to this already....hmmmmm, anyway i grow white widow, it as are almost all strains now is a hybrid. they say it runs about 75% sativa and it stretches like a blonde cheerleader. 30 inches in 3 weeks easy.:o but they fill in at the end.
Right, and you have big spread between each node? 4-6 inches like?
 

paperfetti

Well-Known Member
what did i miss? why are we talking about ph....dammit now i gotta read.
i keep mine at 5.8 and correct downward at 6.1-6.3 depending on where it is when i catch it.
well i figure it cant hurt to try this theory of ph @ 5.5-6.1..plants are 40 days old havent moved:confused: :wall:..im going to put in fresh nutes today..im suprised no real in depth "al b. style" answer on that 1 though..weed baron of his game?:?::?:....hmmm
 

doogleef

Well-Known Member
The statement that most commercial nutes don't have enough Mg is a valid one. In fact a LOT of nutes on the market don't have any Mg in them. :shock: Just check the label. If your nutes have less then about 2% mg. more will be needed. The PBP line makes you actually buy Cal_Mag for the MG as their base nutes are inadequate. It's not news that PH over 6.1 or under 5.5 causes lockout. Keep your PH at 5.8 if you can . Correct it when it gets above 6.1. Al was a stickler about PH under 6. "5.8" he said over and over again. In fact, he was prolly more strict on PH than most of us are.
 

paperfetti

Well-Known Member
yes he did..so whats ya take on "no epsom salt" theory and creating ya own mg. by letting ph drift??
and + rep to you brother..much appreciated
 

doogleef

Well-Known Member
I would feel more comfortable using epsom if my nutes were low on Mg. It is cheap and easy.

PH drifting is healthy in a certain range but I've never heard of it actually creating an element that is not already there. Can;t create or destroy matter. It is what it is.
 

grandpabear3

New Member
:confused: :wall:..im going to put in fresh nutes today..im suprised no real in depth "al b. style" answer on that 1 though..weed baron of his game?:?::?:....hmmm[/quote]

hey everybody....paper got in a zinger there...i think he just burned me a lil bit....:clap: very nice....now your almost as cool as sparkafire:fire:


now i guess i missed what type of response was needed but ph is not that complicated at all. just keep it where it belongs and look elsewhere for your issues once you know it aint that.

not that you didnt know that already:leaf:
 

paperfetti

Well-Known Member
:confused: :wall:..im going to put in fresh nutes today..im suprised no real in depth "al b. style" answer on that 1 though..weed baron of his game?:?::?:....hmmm[/quote]

[/quote]hey everybody....paper got in a zinger there...i think he just burned me a lil bit....:clap: very nice....
now your almost as cool as sparkafire:fire:
lol are you kidding me???..i cant even comment on that one.
ANYWAYZ!!..if i wanted to flush cause of the salt build up from all the bs..is there any "homemade" cleaning sloution i can make oir something or do i really have to go and buy clearex and read thats its nothing but h202 anyway?

now i guess i missed what type of response was needed but ph is not that complicated at all. just keep it where it belongs and look elsewhere for your issues once you know it aint that.

not that you didnt know that already:leaf:
 

paperfetti

Well-Known Member
i cant figure outthis quote thing for shit...how do you just have what you wanna respond to in a persons quote?..are you erasing???
 

grandpabear3

New Member
alright you.....this is my last post, i ga go ni night. i have decided that i am going to make this sog bible we speak of and condense als threads and this one and a couple others to make a one stop shop. dammit ladys and gents, i'm going for it. i'll do it similar to stinkbud (still mad at you btw, but i give credit when due) and the way he put together his aero/nft pdf ...fuckin brilliant and beautifull. it will take me the rest of my life i'm sure but i'm getting started this weekend. and when its done....look out for my ego......it'll be nasty. al's really gonna be proud of me when he reads it but he will probably take me down a notch or a 1000 for being such a weed baron.:hump:







lol are you kidding me???..i cant even comment on that one.
ANYWAYZ!!..if i wanted to flush cause of the salt build up from all the bs..is there any "homemade" cleaning sloution i can make oir something or do i really have to go and buy clearex and read thats its nothing but h202 anyway?
i never flush so i wont comment but i remember reading about you or someone having epsom salt issues ...anyway i use a heaping tablespoon in my 20 gallon tubs once a week. anymore than that and eeewwwwwwweeeeeeeeeee, no thanks

i cant figure outthis quote thing for shit...how do you just have what you wanna respond to in a persons quote?..are you erasing???
i cant tell you i am the weed baron it just happens for me . but if you wanted to try.......hit the quote button like normal then when you go to the reply screen it puts their quote in the box.....you highlight the sentence/s you want to quote then click on the yellow square quote box in the upper right side of the actual reply box. (if your mouse goes over it , it will say "quote"
then click it and bam!!! it wraps the words in a quote do hicky and you just put your first letter of your response on the right side of the last quote bar.

damn i just confused myself.....lol give it a shot. you can do it!:hump:
 

sparkafire

Well-Known Member
I know I know i retired but i think i will be that old retired guy that sits on his porch smokes camel no filters and yells at the kids as they ride by on their bikes If that's OK with everyone.

After all I think i put in enough time to at least have that going for me.

So Mr Paper It was smart of you not to comment to "WEED BARON" Bugsrnme because he miss spoke you could NEVER be even as cool as I for compared to me your a fuckin blow torch!! :hump:

And Baron BUGS :finger: you for even putting me in the same quote with that jackass!! :hug:

Now this can go 1 of 2 ways lets see which one he takes. Taking bets now.

hey everybody....paper got in a zinger there...i think he just burned me a lil bit....:clap: very nice....now your almost as cool as sparkafire
lol are you kidding me???..i cant even comment on that one.
ANYWAYZ!!..
 
Top