Solution For High Heat Problem

Nizza said:

yes this looks a little better!
could you maybe tilt that fan so it is like a 45 degree angle pointed straight into the exhaust vent?

if you did this you could eliminate that tight bend on the right and tighten/shorten up that squirrely duct on the left as well

Is the 6" exhaust vent tied right into the tent or just sitting on top? You want it tied in

Also be sure to move your temp/humidity sensor like others have said to, and upgrade that intake to a 6".
glad to help man I really hope this helps you solve the issue!

Click to expand...

djali30 said:

... If you guys ever visit to Istanbul we can smoke together ...

Click to expand...

djali30 said:

... One of the most beautfiull places by the sea ...

Click to expand...

StareCase said:

My grandparents, who have both departed our world many years ago, owned an apartment in Cinarcik. It's been over 40 years since I visited Istanbul - but I loved taking that ferry back and forth between the two locations.

For many of the 23 nights that we stayed in their flat, I consumed plenty of EFES Pilsen at those outdoor patios by the Cinarcik pier.

Click to expand...

djali30 said:

Hey fellas . Is this place correct to put the thermometer ?

Click to expand...

coreywebster said:

Certainly better than where it was, but I would still get a piece of white card to shade it more.

Click to expand...

djali30 said:

... So youre saying my temperature is even lover than this ? ...

Click to expand...

djali30 said:

... Do you know where im originally from ? Yalova City ...

Click to expand...

coreywebster said:

Certainly better than where it was, but I would still get a piece of white card to shade it more.

Click to expand...

StareCase said:

Yup. It might be. Those tops of yours do look good and chubby and are showing no signs of heat distress.

What are the odds of that!? You know - despite it's perceived size, this really is a small world!

Click to expand...

djali30 said:

Im so happy to be a part of rollitup already... Sleeples stresfull nights are over. Thank you all of you .

Click to expand...

djali30 said:

Where should i put the thermometer sir ?

Click to expand...

2Hearts said:

Its hard to find the right spot but the rules are - away from all light.

Ill give you a scenario to help explain - its a hot day today, weather reports say air temps 30c maximun. My thermometer is hanging indoors shaded in a room, its reading around 30c and i feel warm even hot. I take my shaded indoor thermometer and place it unshaded outside exsposed to full mid day sun. It now shoots up to 50c and i feel a lot hotter because of the suns rays.

Thermometers heat up from the light way past air temps and start registering light energy and not simply the energy of the air, your extraction fan means air moves quickly through the tent barely able to heat up so the inside of your tent should be close in temperature to the outside.

Ignore advice or growers which stick thermometers under the light or in the canopy, this is a bad place for it.

Click to expand...

Nizza said:

View attachment 4603710
The rectangles are proposed fan locations

ok so how about this. If you cant put it vertically on the wall maybe a table to at least bring it up to the level of the hole. you could then maybe run the vent out a little behind the tent and then up and into the tent

does it have a high vent sock somewhere? It looks like it is just sitting up there.

If you don't feel like moving the fan, start with changing the intake duct to a larger size and making the duct have smooth bends, and a straight forward duct path

you could also try putting the fan on the top of the tent with this situation but it would be the same as having the bends really close to where you have the fan right now, it would just be on top of the tent at that point

Click to expand...

Skyhound said:

leds will reduce temps

Click to expand...

2Hearts said:

Mites wont get through a mesh smallercthan themselves.

Your tent heats up quick, is extraction low or thermometer in the light?

Click to expand...

Nizza said:

View attachment 4603699
this is what I'm looking at.
that 6" pipe is exhausting correct? That heat would just be pulled right back in before it could mix with the room air

Click to expand...

TreeFarmerCharlie said:

You can get a more accurate reading if you get something that has a small wired temperature probe. The smaller surface area helps prevent it from absorbing the heat from the light.

Click to expand...

coreywebster said:

Pic shows thermometer in direct light.
Should be above light line or shaded from light.

After that if its still so hot then the fact you having the door open to help means your not pulling enough air through,.
Are you lights on at night?

Where does the hot go after extraction?

Canna boost is a waste of money. Just use the base nutes next time and you wont be able to tell the difference

Click to expand...

VRZ711 said:

Rise the humidity to 70% or so.

Click to expand...

StareCase said:

I have cousins who live in Bostanci.

Click to expand...

Skyhound said:

i had heat problems 32~33 C with hps 250w , bought 170w good quality led system and now i have 26~28 C and better light then hps 250w , but yes its expensive

Click to expand...