SoO LED's Thread

SoOLED

Well-Known Member
IMG_2938.JPG IMG_2940.JPG IMG_2960.JPG IMG_2961.JPG IMG_2963.JPG IMG_2965.JPG IMG_2987.JPG

looks like Monday, I think they are +9days or so, I don't remember; but the trich colors are right on target.

I'm stoked for the next clones coming up next, I ran them before. I should be back up and running next week.

I will post some dry pics/weights on this run. soon as that is ready.
 

HydroRed

Well-Known Member
View attachment 4005947 View attachment 4005948 View attachment 4005938 View attachment 4005939 View attachment 4005940 View attachment 4005942 View attachment 4005943 View attachment 4005944 View attachment 4005944 View attachment 4005945 View attachment 4005946 So after high jacking other peoples threads: I'm going to just start my own. this is going to start with the end of my IHG: Disco Funk grow, to harvest to jar.

I have my next batch of IHG Black cherry gorilla which I have been running quite a bit, when I was off the site for a bit.

right now I'm at week 6 +/- a few days, the pistils are receding. I had some bad heat for about 10 days here in SoCal, the pheno did not have a large flower, but they are very soild some of the most dense calyx's ive come arcoss. the outdoor is pretty close to whats in door: the out doors were left over runt clones.
I'm going to post these last pics. and one more set just before I cut, and start the cure.

90/6/17

~V

ADD: I'm just going to be using my CXB's and I'm going to add another 260 QB. so ill be running 12 cxb's and 4 QB's. qb's are 3000k the cxb's are 3500k I'm using a custom drip system in 7 gal pots w/HP promix+hydroton
Crazy 2 & 3 blade leafs in the second from last picture!
 

Photon Flinger

Well-Known Member
My soil mix contains promix everything I pull goes back in. Even stems and what not. If you're not going to be replacing the media every run especially this is very beneficial.
You have to take care of the microherd!

I'll leave the main stalk in after harvest for a couple weeks. As it dries out, the mycos works it way up the stalk then I cut it into lengths about a foot. Those then go into the next pot like a straw for aeration. Mycos in the stalk will then start to grow out and connect to the roots of the new plant.

Saves me on mycos. I also use Azos for nitrogen which has a natural pgr. To get more it out of it, I mix it with warm water, a bit of sugar and let it sit for a few hours before applying rather than right away.

Each successive run the medium get better and better requiring less feeding. Using a sip helps too.
 

OneHitDone

Well-Known Member
View attachment 4009557 someone wanted to know what nuets I use; rather then type a list ill just post this.
never mind the junk and old gear/extra lights laying about. I do everything in a large basement so this table tends to be the "ill put his away or clean this later table" and you never know when you might need something in a pinch.
What kind of a feed schedule are you running with the CES?
 

SoOLED

Well-Known Member
What kind of a feed schedule are you running with the CES?
I use the open (dtw basicly) system, but I don't have much waste water. I use the CES feed chart at about -30%. just about 28 gallons every 2-3 days (x2 a day feeds) at 600+/--900+/-ppm @5.6-6.2PH (adjusted true for plant amp issue)
 

SoOLED

Well-Known Member
now; I have something really nice coming up. this is and F2 black cherry x F2 G4. it was just F3 BCP x g4(cut), but they have added the F2g4 from another breeder. I have really high hopes, on a good pheno.

there is a beast in these genetics; after selling my long time grape ape pheno. Ive been looking for something to call mine...ALL MINE again.
IMG_3591.JPG IMG_3592.JPG IMG_3593.JPG IMG_3598.JPG

picture 2 plant #4 has some deep G4 twists.

the stalks on some of these are pylons. Not topping or bending; I wanna see how they grow out. be cutting clones, doing a short veg and flipping those. 4 weeks till clones, 7-10 day root. 6 week veg and flip. so 5 months. till we can see finished phenos.

ill post them up and we can vote.

ill update once a month or so.
 

Attachments

Last edited:

Evil-Mobo

Well-Known Member
now; I have something really nice coming up. this is and F2 black cherry x F2 G4. it was just F2 BCP x g4, but they have added the F2g4 from another breeder. I have really high hopes, on a good pheno.

there is a beast in these genetics; after selling my long time grape ape pheno. Ive been looking for something to call mine...ALL MINE again.
View attachment 4031516 View attachment 4031517 View attachment 4031518 View attachment 4031519

picture 2 plant #4 has some deep G4 twists.

the stalks on some of these are pylons. Not topping or bending; I wanna see how they grow out. be cutting clones, doing a short veg and flipping those. 4 weeks till clones, 7-10 day root. 6 week veg and flip. so 5 months. till we can see finished phenos.

ill post them up and we can vote.

ill update once a month or so.
Awesome can't wait to see this :bigjoint:
 

SoOLED

Well-Known Member
IMG_3642.JPG

early sexing is 7/1 females. I got one male that is beefy AF.

this might sound strange, but I was hoping for more like 4 females, because cloning and flowering 7 phenos is gonna be a lot of work.

if I culled any, it would always haunt me if that was the "good one"

so ill but cutting two clones each next week, ill post pic's when they cut roots.

clones:

Alpha
Bravo
Charlie
Delta
Echo
foxtrot
Golf

incoming....
 
Last edited:
Top