Step by step closet grow setup Mars Hydro SP150 flood and drain
- Thread starter plantinggreen
- Start date
plantinggreen
Active Member
Billy the Mountain
Well-Known Member
The SP150 is a 140w light; good for a 2'x2' area
Budzbuddha
Well-Known Member
Are fried wires a thing ?
asking for a friend
asking for a friend
plantinggreen
Active Member
Drop That Sound
Well-Known Member
Just cut the bad portion out, and put a male and female plug, and plug it back together, for $6.99. The legit way 
Drop That Sound
Well-Known Member
Or if its toward one end of the cord, just cut your losses, and put one new plug end. lol
plantinggreen
Active Member
Bees entered the laundry room before I taped it up so I got to zapping them with an electronic fly swatter as the door was open with the cord part way out there. They weren't my bees based on the location and their behavior at least I think they were next door's honey bees. I have mason bees here. I will wrap it with tape and maybe the whole thing with water pipe insulation for some sunlight and abrasion protection. It goes from the house through a sump pump hole in the interior and exterior of the house to the 22' x 22' building the the back ten gauge. Small zip ties are ok instead of shrink wrap I think. There is friction tape.
Water is another safety concern and helps plants grow.
Water is another safety concern and helps plants grow.
Last edited:
Creature1969
Well-Known Member
This thread is frightening on so many levels.
plantinggreen
Active Member
I have some of thoseJust cut the bad portion out, and put a male and female plug, and plug it back together, for $6.99. The legit way
View attachment 5180171
I like to use these too although sometimes the parts sit around not assembled.
plantinggreen
Active Member
plantinggreen
Active Member
I'll add clear packing tape over these stick on labels which I have to cut instead of a permanent marker to try and keep the ink from fading or washing off.
Last edited:
Danky clones
Well-Known Member
Good luck bro bro
PopAndSonGrows
Well-Known Member
Big yikes, but hopefully you just didn't post the pic where you swept and mopped up, and heat-shrunk each individual wire.
Honestly it looks like you need the SP 3000, in addition to the existing SP 150. Best of luck!!
Honestly it looks like you need the SP 3000, in addition to the existing SP 150. Best of luck!!
Southernontariogrower
Well-Known Member
Need more wattage for square footage. More people should adopt the one light one plant principle. Plants look like they are in need of something. Or some things. I would be careful as growroom fires are blamed on the person running it. Insurance companies can be sticklers, Enough said, best of luck.