St.Exo
Member
So after many years and wanting to do a true wood frame grow room setup I’ve finally found the time and motivation to follow through on one. Here in the next day or two I’ll be throwing up the walls and doing ventilation which brings to you all for
Advice. I plan or running 3 4•4 ebb’n flow tables under 1k hps air cooled each. I’ll be both scrubbing and cooling with at least a 800 cfm 8 in. fan and sending it out a chimney. ( I need to upgrade the current fanI have). Now on my intake, would It be ok to just add Some large air registers down low? Or, should I use one of my 6in fans and To supplement air intake?
Thanks for any advice and happy 420 folks!!
Here is a little progress shot of where I’m at
Advice. I plan or running 3 4•4 ebb’n flow tables under 1k hps air cooled each. I’ll be both scrubbing and cooling with at least a 800 cfm 8 in. fan and sending it out a chimney. ( I need to upgrade the current fanI have). Now on my intake, would It be ok to just add Some large air registers down low? Or, should I use one of my 6in fans and To supplement air intake?
Thanks for any advice and happy 420 folks!!
Here is a little progress shot of where I’m at