Ryantrich89
Member
pretty much just wondering about the cal mag pk and molasses
The Official Canna Coco & Nutrients Thread
- Thread starter jberry
- Start date
nas2007
Well-Known Member
well feeding her cal mag every feed would make sense only if she had some problems , or you know that your water isn't so good, if both of them are not the case then using it every second feed would be better
try not to worry to much coco growers have grown plants with only A and B from start to finish and did great, ones you have your first coco grow under your belt, you will see how easy it is
nas2007
Well-Known Member
what are you wondering about the cal mag pk and molasses?
AzCannaMan
Active Member
Crap, I just got Canna Coco, Coco A&B, Rhizo, & PK13/14. But I have Ebb & Flow tables.
Has anyone used Ebb & flow with these nutes successfully????
Are you suggesting I cant run a recirculating system? I need to convert over to a drip & figure out what to do with the waste that drains off??? How much waste are we talking about here? A small amount that would be like 1 gal or less per feeding im hoping....
My growshop has stopped selling Canna Cogr slabs and want me to start using Canna Coco slabs instead. I have two short questions regarding this:
1) The Coco slabs are not as big as the cogr slabs. Since there ought to be less space for the roots, is it really possible to get as good results with Coco as Cogr slabs?
2) My Cogr slabs managed to keep the PH level on a good level without me having to think about it. Is the Coco slabs just as good in that aspect?
1) The Coco slabs are not as big as the cogr slabs. Since there ought to be less space for the roots, is it really possible to get as good results with Coco as Cogr slabs?
2) My Cogr slabs managed to keep the PH level on a good level without me having to think about it. Is the Coco slabs just as good in that aspect?
AzCannaMan
Active Member
Hey guys, no one responds to this thread incase you havent noticed. Like the last 10 questions have gone unanswered including mine. LOL
I can help shed some light on your PH foliage spray question though. Not sure on the Ml/Gal of boost, refer to the bottle. If it dosen't say 2 Ml a gallon should be sufficient, but forget the PHing before you spray. Ive seen some people say go to 7 but IMO its a waist of time & ive also heard many people say the PH on your sprays doesn't matter at all.
Rep+ if this helped you out.
Happy Growing!
puffenuff
Well-Known Member
Thanks bro! Figured as much about phing for foliar. 2ml/gal is about what ive been using. Thanks again!Hey guys, no one responds to this thread incase you havent noticed. Like the last 10 questions have gone unanswered including mine. LOL
I can help shed some light on your PH foliage spray question though. Not sure on the Ml/Gal of boost, refer to the bottle. If it dosen't say 2 Ml a gallon should be sufficient, but forget the PHing before you spray. Ive seen some people say go to 7 but IMO its a waist of time & ive also heard many people say the PH on your sprays doesn't matter at all.
Rep+ if this helped you out.
Happy Growing!
nas2007
Well-Known Member
hi there post your question again here Coco Growers Unite! you'll get your answer there,
nas2007
Well-Known Member
that depends on your plants and how old they are, i usually start feeding her a and b when shes on her 3 set of leaves, i start at 0.5ml a and b to 1 liter of water, and gradually up your feeds aiming to be 3 to 4 ml of a and b the time she gets in flower, hope this helps, and always start of low with all your nutes and gradually take it to full dose,
hope this helps
nas2007
Well-Known Member
try your nearest hydroponics store, they usually cheapestHey guys I was wondering where is the cheapest place to buy Canna products online?
Is it worth it to switch to a cheaper brand?
nas2007
Well-Known Member
i havnt done no foiler feeding yet but will deffo do it on my next run, this is the info i know so far from my pal pukka
you can start stight away in flower right up to the end, every other day
mix it half strength, no need to ph your tap just make sure its sat for a day, it will last a week
just before light on so theres time to dry before the light gets intense
just spray the plant everywhere till its covered
mijone
Member
Hows it going guys, I know its probably been cover in this thread but what is the mixing sequence for the canna range( a+b rhizo cannazime - pk and boost) and how long should you let it sit before feeding. Im in canna coco hand watering(feeding) and have problems with the leafs curling up and now getting rust blotches on them. Have 2 plants which are in veg in 25 ltr pots about 5-6 weeks old with one light 400 hps cooltube sitting about 400m above them, thought it might be lock out so flushed with 10ltrs of 5.9ph water with 0.5ml of rhizo per 1ltr. Flushed them 3 times first 2 times was only 10 ltrs then the last 1 last night actually was with 20 ltrs. Just trying to eliminate bits of the puzzle, any help would be appreciated.
PS primo thread jb primo as bit of a life saver
PS primo thread jb primo as bit of a life saver
puffenuff
Well-Known Member
here's how I do it and it works for me:
Mix A in, stir and shake. Mix B in then shake. Next I do rhizo then shake. Then zyme then shake. Then boost and shake. Then if pk is being used add that then shake. Then I add whatever else like cal/mag which may help clear stop more of those rust spots. Shake and let sit for an hour or two before checking and adjusting the ph. Then shake well before feeding. Hope that helps.
PUKKA BUD
Well-Known Member
Hey puff not sayin your wrong or nothin but jberry always taught on here to mix your cal/mag in 1st an give it a good old mix before anythin else, somethin to do with it can caurse other stuff to lock out! and to do the rhiz after that cos it raises the ph, so your not goin down then back up and back down again if you get what i mean, i always go calmag, rhiz, a&b, cannazym, pk then the boost if im usin.
puffenuff
Well-Known Member
Yeah I heard that some people do it that way too. I don't think there is really a wrong way to do it other than mixing a & b directly together. but what you say makes a lot of sense. Funny thing is, that most of the time after mixing everything together, I don't even need to adjust the ph at all, gotta love CANNA!!
Hello there. I am about to start a grow with cana coco + nutes and got some questions.
1) Should i water with standard ph 5.8 in regular base or it depends on runoff's ph?
2) Can i use Calcium and Magnesium from Canna additives instead of cal/mag? If yes which ammount of each would be ok?
3) Finnaly, should we use PK13/14 from the beggining of flowering or its better after 3rd week?
Thanks a lot for help, keep up the good work!
1) Should i water with standard ph 5.8 in regular base or it depends on runoff's ph?
2) Can i use Calcium and Magnesium from Canna additives instead of cal/mag? If yes which ammount of each would be ok?
3) Finnaly, should we use PK13/14 from the beggining of flowering or its better after 3rd week?
Thanks a lot for help, keep up the good work!
LesterBurnum
Active Member
grobari,
Yes 5.8 is what to shoot for. + - .2
Read the bottle you want to use. My experience is that using canna will still make you need to add cal/mag.
imho its better to use the pk starting as soon as you start to see hairs. light and working the dose up.
Hope this helps.
Lates