The Seed Collectors Thread

Jordan shoe collectors are worse than seed collectors.

Ps
Fire red 4 retro Jordan's dropping sat.
Better stand in line all night for em lol
 
I live sooo far out in bum fuck Egypt that their is no line to get Jordan's.
Just show up sat and buy em.

But I only wear Merrill....
 
Alphakroniks releasing Sin City Kush BX.. should really be called Sin City Kush F2, cuz thats what it is. Sin City Kush x Sin City Kush. I told Jay I think it's just gonna confuse people to call it a BX. It's good tho to see someone taking things past F1. Wish he would do the same for his Snowdawg line.

http://www.alphakronikgenes.com/
currently working on:
Sin City Kush BX
Jackpot Royale BX
SCK Line
Iditarod 2 Line​
 
strains from my current run i'm most impressed with are Sour Amnesia and Choc. Kush
both are gonna be some fire, and luckily they're lookin like the best yielders out of the lot
would suggest popping these if you have them :hump:
 
I talked Jay into calling it Sin City Kush 2.0, he's confirmed it's the new name. =P
Avoids confusion I think. That and sounds better than F2.
 
snodome said:
anyone having germ problems with the ggg bx2s? 5 days no taps. everybody else graduated.
Click to expand...

Your the first I've heard of tbh, but all GGG seeds are fully backed up by the breeder. Whats your germ' method and how many beans from the pack have you started?? 1-7 days is about the right time frame to wait during germination (for any weed seed). Please do keep us upadated on this though and if the worst case senario does happen then know that we've got your back :wink:.

On Coco, I preffer to use CANNA 'pro+'. It's ready to use right outta the bag and only needs charging up with a good watering. I like to use a mix of plain tap water (ph-5.9) & 2ml per 10L of 'Bio+' for the task when starting new seedlings & fresh rooted clones into coco. Here's a link with more info on the 'Bio+' >>> http://www.aquaculture-hydroponics....nhancers-1/vitalink-bio-plus-1l.html?___SID=U. After the first few weeks when new growth is really starting to set off, start to gradually introduce nutes into the feeds lightly from there. If the coco starts to dry out at all, just lightly spray water onto the medium until the moisture is soaked back in :leaf:
Also with coco it's best to get the quality stuff (don't cheap out) and remember it's not soil!! Water till run-off and drain to waste, a lot of strains do need extra cal & mag (ph - 5.7-6.1) as diff's can/do occur, and always flush out regular to avoid any build up of nutes/"salts" in the medium.

I only started using coco last year and I gotta say it works great for me :bigjoint:
 
THESkunkMunkie said:
Your the first I've heard of tbh, but all GGG seeds are fully backed up by the breeder. Whats your germ' method and how many beans from the pack have you started?? 1-7 days is about the right time frame to wait during germination (for any weed seed). Please do keep us upadated on this though and if the worst case senario does happen then know that we've got your back :wink:.

On Coco, I preffer to use CANNA 'pro+'. It's ready to use right outta the bag and only needs charging up with a good watering. I like to use a mix of plain tap water (ph-5.9) & 2ml per 10L of 'Bio+' for the task when starting new seedlings & fresh rooted clones into coco. Here's a link with more info on the 'Bio+' >>> http://www.aquaculture-hydroponics....nhancers-1/vitalink-bio-plus-1l.html?___SID=U. After the first few weeks when new growth is really starting to set off, start to gradually introduce nutes into the feeds lightly from there. If the coco starts to dry out at all, just lightly spray water onto the medium until the moisture is soaked back in :leaf:
Also with coco it's best to get the quality stuff (don't cheap out) and remember it's not soil!! Water till run-off and drain to waste, a lot of strains do need extra cal & mag (ph - 5.7-6.1) as diff's can/do occur, and always flush out regular to avoid any build up of nutes/"salts" in the medium.

I only started using coco last year and I gotta say it works great for me :bigjoint:
Click to expand...

Thank you kindly for the info on the coco SkunkMunkie
 
I know you guys have prolly seen Girls Gone Wild.. but there's this new movie out called "Girls Gone Dead".. the tag line of the movie.. "Just when you thought it was safe to go topless." haha. and it stars....guess who....Beetlejuice from the Howard Stern Show.

I got the girl comin here in a lil while to relax and crack open a few bottles of Preseco champagne... she wanted me to pick out a good movie for the two of us to watch.. haha I'll let you all know how it goes.

Trailer
[video=youtube;lRu9huXsOqo]http://www.youtube.com/watch?v=lRu9huXsOqo[/video]
 
gudkarma said:
i just jizzed all over this vid
Click to expand...

I took a 3.5 ton unit and did all of this. U can only have the air handler in one room. So I built a plenum out of the cheep silver fiber board. Ran normal duckt from HD the key is the have equilibrium between the two rooms I achieve that by having a open duct to allow pressure back and forth between rooms. And the UV sterilizer he is correct but they need to be around the coil ware mold grows there is no way that there is enough contact time for that light to eliminate the spores that way. Google it and you will see. To be totaly effective you need 6 UV lights three on each side if the evaporator. The fittings are cool for the freon lines but the truth is you can buy a normal AC unit and the freon charge for 40 feet is in the compressor. Nothing special like he makes it out to be. And you buy a simple torch kit from again HD and if you can sweat copper then you can sweat the connections on a new unit. And that remote compressor that would seem to be more electric draw to keep it cool that's the whole porpose of having it in with the condenser to kill two birds with one stone so to speek. If your compressor is loud enough to cause suspicion then something's wrong either it isn't charged right or it's worn out. it is a nice plug and play but boy do you pay for it. I approached a couple AC guys on the side of the road and asked if they could get me a new unit that I want for a Freind in the Bahamas and one guy got. Back to with a brand new 3.5 ton no heat coil for $2200 brand new in the box. I've replaced the fan moter on the outside unit once. I have a back up compressor just in case and another fan moter just in case and a back up capacitor. Everything else is usually good to go. Just my two cents these days you can do anything with google. I'm self taught. Just like with lighting and hoods AC is just as important.
 
snodome said:
i was eyeing the mobius stereo? matrix at aqualab. it promptly sold out in april during their sale. now they just have 1,600$$ mobius in stock.

do you know another retailer that carries them? brick and mortar only?
Click to expand...

was at a brick and mortar spot

(just seen that post)
 
minispilt overton'd upstairs.

cause cold air sinks i disconnect the floor vents and pop 2 fan (@ 160 cfm) in the 6" duct.
pulling theoretically 320cfm into the basement labratorium... where i also dispose of my girls gone dead.

12500 btu just gets it done in 500 sq ft of my first floor.

im thinking 24000 btu unit.
pull through the floor.

what you think twisted pleasure bx?

already own a nice electric vac pump, pro gauges, etc.

i never installed house a/c but the mini split dont look complicated to me.
same basic shit as a car... except you dont sweat shit on auto a/c.

imma rent a core drill set up to go through the brick. the rest looks easy.i dont want to really install a minisplit in the lab cause i cant think of a reason to not upgrade the crib portion where i live... plus i can go with the roof for the compressor unit location away from asshole city urchins.

the portable unit (only 8000 btu) keeps the lab just right pumping through the floor & its soooooooooo rigged ! any upgrade gotta be better than what im doing now.

& im absolutely certain my heat issues are long gone already :-) cant wait till my trays all be FULL!
 
Sorry Sketch U a pimp....I seen ur work...Dats as pump as it gets.

Gud U got it. Ya with with those split units all u got to do is connect. No need to vacum. But ya with a unit like I did a 20min suck down.. No Not Asian... Get ur mind out the gutter HaHa had to do it... Anyway.. I think u can get through that brick with just a hammer drill and a good 24" cement bit. I know 24000 btu will just handle 8k so that's 3000btu per 1k anything better then those specs ur good in my book.

Hope this helps guys..

I'm a DIY to the tenth degree can't help it. You should see the Leds I built.
 
You must log in or register to reply here.

Similar threads

R
Plant Cloning Issues, What's Going On?
2 3
Replies
41
Views
2K
medidedicated
medidedicated
Thatoneguyyouknow_
Long time grower returns to the life
Replies
4
Views
802
Thatoneguyyouknow_
Thatoneguyyouknow_
AfterDarkLaboratory
Peakseedsbc.com No longer active!!!
2 3
Replies
40
Views
7K
JiMBeANER
JiMBeANER
V
Second grow - same ILGM seeds, hopefully better results - all comments welcome
2
Replies
29
Views
2K
visper
V
S
Are my notes correct? Please assist me in changes
2 3
Replies
51
Views
4K
sfw1960
sfw1960
Back
Top