The start of my 1st box.( critics required) CFL POWERED
- Thread starter brownEs
- Start date
valuablevariable
Well-Known Member
Basically you cut off a branch to clone (let it grow its own roots) and set it to 12/12 light schedule so that it begins to flower (in a different room/growspace than your vegging plants). After about 10 days itll either grow pistils or pollen sacks and youll know that the plant from which the branch originated from is either a male or female. Then you can remove the males and focus on letting the females grow (be tied down to) the screen. Semi complicated but it works. Fem seeds or clones would of course mean you dont have to worry about it.
valuablevariable
Well-Known Member
Im interested in seeing how it turns out.
hiitsbob
Well-Known Member
check out my thread newbie newbie starting a grow wildbill38 posted this.
the main lining thread.
shows good lst and a nice sog/scrog/spread out colas if thats what you wanna call it.
the main lining thread.
shows good lst and a nice sog/scrog/spread out colas if thats what you wanna call it.
brownEs
Member
finally had the time to sit and read thru the whole thing, wow what a great write up!! thanks for the link brother..
cannabislove
Member
Looking good so far and like author said if using cfls make sure u get some on the sides of walls so ur lower growth on the plants get as much light as they can! I just recently started a cfl grow I have 6 seeds going right now 5 are germinated 
do u have a fresh air intake to ur box and a fan pulling air out the top taking out old air/heat? When u gonna be starting the beans?
do u have a fresh air intake to ur box and a fan pulling air out the top taking out old air/heat? When u gonna be starting the beans?
brownEs
Member
thats the space i have to work with for now, i might look into a 150w hps after this first grow
yes side lighting is in my build plans, at the rate im going right now im hoping i can have it all done and built ready to grow in 2 weeks. im about to throw my seeds in some jiffy pellets right nowLooking good so far and like author said if using cfls make sure u get some on the sides of walls so ur lower growth on the plants get as much light as they can! I just recently started a cfl grow I have 6 seeds going right now 5 are germinated
valuablevariable
Well-Known Member
Dont worry too much about raising the roof. Like I said before, you could probably even go without raising it and just lower the screen. (If you were to use HPS then of course youd need more space but thats another grow). Side lighting wont be that important for you either since you have the screen in place which will give you an even canopy and less budsights on the sides to worry about. With CFLs, any buds that arent directly exposed to the CFLs will be very small anyways, so its best just to write them off and concentrate on the main ones towards the top. Theres always more lights and more room that you can add but in general youve already got a decent box to work with.
valuablevariable
Well-Known Member
Was gone a few days (amsterdam), the corner lighting might work, you just wanna make sure the bulbs are only a few inches away from the top. Ideally the bulbs are in the middle but it might not really make much of a difference if they are slightly off towards the corners like that.
What does it look like with the screen in?
What does it look like with the screen in?
brownEs
Member
the actual screen is not in the pic but you can get a idea of where it will be, im gnna stick it with it and hope for the best im really happy how every thing is fitting in there, the exhaust fan how ever is now going to be mounted on the roof outside the box sucking air directly from the top blowing out the thur a vent coming out the roof of the building where the grow cabinet is in.
(as you can see i got those long planters, love em! the hold the same if not more soil the the ones i was going to use in the beginning, with HALF the height. good call on those man. THANKS!
valuablevariable
Well-Known Member
That looks pretty good. I would say you dont need to raise the roof, but possibly lower the screen an inch or two. Theres enough space from pot to screen for the plants to grow in that you can lower it a bit without any problems. Did you get any trays for the pots? Looks like they are a really nice fit. When do you plan on starting to germinate and be sure to do a temp test with all lights and fan on.
brownEs
Member
The pots have a built in tray that snaps in at the bottom. Do you think I should add another? One part of my ventilation setup I don't have figured out is, when should my fans be on? I do plan to use a thermostat.
Should the exhaust be on all the time or wired to the t-stat. Also the fan blowing at the plants, should that be on all the time or wired to the t-stat as well.
As of yesterday (2-14-13) 6 of my 10 seeds have spouted. The other 4 maybe today.
Should the exhaust be on all the time or wired to the t-stat. Also the fan blowing at the plants, should that be on all the time or wired to the t-stat as well.
As of yesterday (2-14-13) 6 of my 10 seeds have spouted. The other 4 maybe today.
jimmer6577
Well-Known Member
whats up? I'm new to this site and found this interesting. I just started 5 female seeds of jack herer for outside this year and am using cfls 23 watts 65ook to veg and clone. Now I'm thinking of growing a couple out trying just the cfls inside so i dont have to wait till mid oct.
Frisko
Well-Known Member
So you're growing outside with a 23 watt cfl? That's retarded, and a 23 watt cfl is even more retarded.
valuablevariable
Well-Known Member
Use those trays and see how they work for you. I also wouldnt plant the seeds in the big pots yet, use little ones or cups for the first few weeks. They wont need the big pots yet and small ones will allow you to move them around for watering etc.
The exhaust fan you can just leave on at all times unless you prefer it to be off. I would say its not so important either way. Same goes for the fan inside, although I might just turn it off during night time.