Where did you get the hooks?
You mounted the dehumidifier on a custom made shelf it appears. What is the yellow item, a sponge?
Thermoelectric wine cooler drying and curing - DIY
- Thread starter Hook Daddy
- Start date
You mounted the dehumidifier on a custom made shelf it appears. What is the yellow item, a sponge?
smoke and coke
Well-Known Member
I had my koolatron loaded for 3 weeks and just bagged up into sweet decades bags and put them back in the fridge. 12.5 oz. Along with 5 oz. From a plant chopped 4 weeks ago.
Anticipating a decent harvest, I built a 2nd koolatron and loaded that 2 weeks ago. Still in there for now.
Anticipating a decent harvest, I built a 2nd koolatron and loaded that 2 weeks ago. Still in there for now.
Blue brother
Well-Known Member
You could put the fridge power on a INKBIRD humidity controller, the temperature wouldn't be stable but the humidity would be much more stable, I can't see the fridge warming up too much between cycles, that's what I would do in your situation.
Edit: sorry I can see you're saying it's holding stable, I'm not trying to reinvent ur wheel if it's working, just suggesting another way around keeping the humidity stable
Week4@inCharge
Well-Known Member
"My unit is compressor, and I'm going sans dehumidifier and just using an Inkbird to automatically shutoff the cooler"
The hole drilled from behind was to insert the sensor vs having it hanging in from the front door. (like pictured) looks cleaner and you don't have that slight gap from where the wire contacts the seal of the door. (just measure before drilling!)
My only problem is I won't have any flower till November.
Last edited:
SouthFloridaGenetics
Well-Known Member
I bought a clothes hanging rack and cut it to fit the bottom of the shelf. The yellow item is a sponge.
Blue brother
Well-Known Member
My bad I assumed you meant a INKBIRD temperature controller. I'm very interested in your results, if the compressor can be used as the source of dehumidification and cooling then simply tinkering with fridge volume vs plant mass might get this pretty close to perfect. BRAVO! And Thankyou!"My unit is compressor, and I'm going sans dehumidifier and just using an Inkbird to automatically shutoff the cooler"
The hole drilled from behind was to insert the sensor vs having it hanging in from the front door. (like pictured) looks cleaner and you don't have that slight gap from where the wire contacts the seal of the door. (just measure before drilling!)
My only problem is I won't have any flower till November.
View attachment 5422190
Week4@inCharge
Well-Known Member
I didn't do it on purpose, I meant to follow this threads recommended thermal electric fridge approach. Got a little anxious and just bought the first listing I saw on Offer Up. It wasn't till I got it home was when I realized I got the wrong one..lol. I was gonna resell it back to the market when I saw the video of the guy using a regular refrigerator to dry his crop. He was using a Infinity controller. Thought, I can do the same with an Inkbird. Before testing it out on the fridge I hooked up the Inkbird to the wine cooler. Seems to be working. Stuffed my few bags of buds in there and it's still holding its temperature.
Blue brother
Well-Known Member
Are you drying in paper bags, I would assume if the humidity controller is in charge of the compressor then you they probably won't be needed. Or if you're set on using the paper bags and happy to burp them then you could maybe do away with the controller altogether which would keep temp more stable and put you in charge of controlling the humidity in the bags by burping them periodically.
The big issue I can see with this is that the dew point will be allover the place as both temp and humidity swing, with the thermoelectric cooler the temperature is kept stable and the humidity has small swings, with your set up the humidity will still have small swings but the temperature will have bigger swings. I suppose only time will tell
Week4@inCharge
Well-Known Member
As of now, the temps are in check, (they only swing by 1 degree) . It's the humidity that swings from 63% to 55%.that's with a wet sponge in there, won't really know till I fill it with fresh harvest though.
Been following this thread for a while and decided to have a go at it as well! Had to order a different cooler as there's almost non on the market where I am, or barely any TEC fridges in general.
This is the closest I found, but there's no pics of the inside so I REALLY hope there's a drain hole in there lol. Brand is "Cavin Northern Collection 15"; it's NOT gas insulated, and climate class N (designed to work in rooms with ambient temp. of 60-90F)
I'm just hesitant about the whole drilling and taking apart the dehum, but let's see. I also feel like these dehums won't last a long time, probably needing replacing once in a while (unless you have some kind of knowledge about soldering/electric work).
EDIT: It might be the same cooler as the Koolatron, maybe rebranded for EU? Cheapest price was 400$, and that's with a 20% discount. Found a pic of the back and it looks identical!
This is the closest I found, but there's no pics of the inside so I REALLY hope there's a drain hole in there lol. Brand is "Cavin Northern Collection 15"; it's NOT gas insulated, and climate class N (designed to work in rooms with ambient temp. of 60-90F)
I'm just hesitant about the whole drilling and taking apart the dehum, but let's see. I also feel like these dehums won't last a long time, probably needing replacing once in a while (unless you have some kind of knowledge about soldering/electric work).
EDIT: It might be the same cooler as the Koolatron, maybe rebranded for EU? Cheapest price was 400$, and that's with a 20% discount. Found a pic of the back and it looks identical!
Last edited:
Week4@inCharge
Well-Known Member
All I can say is measure twice then again before drilling . That's a beautiful wine cooler.
Blue brother
Well-Known Member
That black tray at the bottom indicates there will be a drain above it
Hook Daddy
Well-Known Member
Welcome to the club, that cooler looks like it will work the same as a koolatron. I wouldn’t worry too much about the hole or dehumidifier, it’s much easier than it seems. I’ve had my little dehumidifier’s running about two years now without an issue, so they last a decent amount of time.
Blue brother
Well-Known Member
So does the fridge turn on when the humidity gets to the high point and turn off when it gets to the low point? The wet sponge (although not exactly like plant material) will at least suffice as proof of concept, you may just need to tinker with the controller settings once you have bud in it.
SouthFloridaGenetics
Well-Known Member
The refrigerator maintains the temperature and the humidity controller maintains the dew point. The systems work in tandem to maintain the desired temperature and humidity simultaneously. Nothing really turns on or off, it is always on.
Week4@inCharge
Well-Known Member
I have the set point to 58% with a 6 point differential, meaning it won't trigger till 58+6= 64%. It will turn on the fridge till it reaches 58% and then shut off. I'm playing with the set point and differential right now. I'm imagining the entire fridge filled with fresh plant material will increase the humidity a lot faster than the little sponge I have in there. So the temps will drop even lower. Good thing. I'll keep the sponge in there for when they get to near prime condition of dryness just to keep the cycle going on holding a somewhat steady humidity level. That's the plan..
Hook Daddy
Well-Known Member
He’s not using a thermoelectric fridge, it does get confusing. He’s trying to turn a compressor fridge on and off to slow the drying. It’s not a bad idea, just really doesn’t fully relate to this discussion.
Week4@inCharge
Well-Known Member
Lol . Sorry.. I need to clarify that before answering. I'm on compressor fridge guys. Ask @Hook Daddy on thermoelectric fridges. Sorry about that, almost hijacked this thread. I'll probably have to start another thread on compressor type fridges. See how this one works before I do that one. Alright, I'm out of here guys. Thanks for the help and inspiration @Hook Daddy
by2
Active Member
I just finished my fridge and wanted to share how I went about it. I Just started the fridge for the first time so can't say that it works so far but its the same principle as Hook Daddy's Koolatron.
Thermoelectric wine fridge - Klarstein, Barolo 28 - it was on discount 229€
Peltier dehumidifier - Trotec - from Amazone It was like 29€
Controller - Elitech STC 1000 Pro TH, Its not wifi but I had it at home so it will due.
So I built a little stance for the fridge so I can have a bigger drain and move it around in my tight space.
First action was to try and find an entry point for the dehumidifier and sensor.
I was set on drilling a hole in the back, so started to remove the inner back plate.
As you can see this model has no internal fan. Only a big cold heatsink in the back.
On the right hand side you the thermometer for the fridge.
After removing the screws in the corners I stoped for a sec, and thought about the possible problems with thermal paste and other things I might need to deal with.
So changed my mind and just shoved the cables true the drainage hole.
Pored some water to see if it still goes true and 50ml went straight true, so no issues.
I had to cut the cable for my sensor thou, but that was an easy fix with some Wagu connectors.
I keep all connections outside the fridge so it won't come in contact with any moisture.
I also mounted the sensor in the fridge using some foam thing from some packaging and double sided tape.
Thank you Hook Daddy for sharing your Ideas and knowledge, and every one else that contributes to the Cannabis community.
Thermoelectric wine fridge - Klarstein, Barolo 28 - it was on discount 229€
Peltier dehumidifier - Trotec - from Amazone It was like 29€
Controller - Elitech STC 1000 Pro TH, Its not wifi but I had it at home so it will due.
So I built a little stance for the fridge so I can have a bigger drain and move it around in my tight space.
First action was to try and find an entry point for the dehumidifier and sensor.
I was set on drilling a hole in the back, so started to remove the inner back plate.
As you can see this model has no internal fan. Only a big cold heatsink in the back.
On the right hand side you the thermometer for the fridge.
After removing the screws in the corners I stoped for a sec, and thought about the possible problems with thermal paste and other things I might need to deal with.
So changed my mind and just shoved the cables true the drainage hole.
Pored some water to see if it still goes true and 50ml went straight true, so no issues.
I had to cut the cable for my sensor thou, but that was an easy fix with some Wagu connectors.
I keep all connections outside the fridge so it won't come in contact with any moisture.
I also mounted the sensor in the fridge using some foam thing from some packaging and double sided tape.
Thank you Hook Daddy for sharing your Ideas and knowledge, and every one else that contributes to the Cannabis community.
Attachments
Last edited: