These any good

haze010

Well-Known Member
A more logical way of analyzing it.
Look at the actual data it tells you.
So its a 800watt light, and it has an efficiency of 150lm/watt.
The problem is the form factor. It has a single point of light and it says its 120degrees.
basic algebra tells me that means the other two angles of that 120degrees triangle are 30. So if you hang this thing the light will come out like this.

So that green line is how high you have to hang it to cover an area. See the problem? Not very practical for what you want to use it for.
Then throw in that you have all the heat that 800w light at 150lm/watt will produce all being at a single point. Even more impractical.

Some of that style of light can be good for growing, a "ufo" style light they call them but the details are completely different where the beam angle isnt for lighting a warehouse at a high height.
The growing ufo ones have a beam angle much smaller and each "ufo" is smaller watts and covers more like a 2x2 area so 4 are hung in a 4x4 tent. A more common light for growing is the cob syle growing light and before smaller diodes in panels became the efficiecy kings most led growers grew with cobs.
Things like https://www.amazon.ca/Rapid-CXB3590-Light-Fixture-3000K/dp/B07BN4RVC3
are cob lights and grow amazingly and what many ppl used up until like 2016 they were the best you could get for LED.

This light is a definite no, but some ppl grow fantastically with this style, its all about the details.
 
Last edited:

Thcmbuna

Member
Thank you everyone. I actually have mars hydro ts1000 and phlizon 1200w newest in a 3ft x 2.6ft x 7.3ft space two plants. Was looking for something to use as sidelighting.
 

go go kid

Well-Known Member
you could try hanging t5 fluros around yiour plants, they wont burn your plants up and you can light the interior of your grow
 

Thcmbuna

Member
Yes I'm in the UK 240v eu is 220v. I thought leds were a lot more efficient then fluorescent tubes. I want at least 18 inch of penetration.
 

go go kid

Well-Known Member
YOU NEED A STEP DOWN TRANSFORMER TO RUN IT SAFELY, THE ADAPTER WONT DO THIS, IT JUST CHANGES IT FOROM A EUROPEAN/US 2 PIN TO A UK 3 PIN PLUG
 
Top