thousanaires two car garage

Ty13

Active Member
What are all of the plans for A/C, odor control, etc.? You going all sealed(true CGE) with CO2 and if so, by which mechanism? Whether or not you're doing sealed, I hope you're prepared for odor control. I have a similar set up but I built a large structure w/in the garage.
 

ganjagoddess

Well-Known Member
K getting the show on the road so I jus finished putting up the last touches on the insulation and got the electrical done last week so I'm just shopping around for a ac right now then I'm going to be all set and ready to rumble.
View attachment 2349739View attachment 2349740View attachment 2349741
tHAT rECIEPT is ridiculous!!!!

Rip off HYDRO STORES!!! $240 for a LUMATEK!!! They Get them for $125! you gave them 115x6! Over $700 PROFIT on JUST THE LIGHTING!!!

These double their money hyrdo stores need to stop RAPING this community!!
 

thousanaire

Active Member
IMAG0128.jpgIMAG0127.jpgIMAG0124.jpg


Well the 240 was before he took all the discounts off I got them for 240 with the bulb included I kno they make a lot of money but I got it cheaper than I wuda online so id rather support my local hydro store who shoot me hangers n siccsors and thermometers for free. Damn its crazy to kno that they get the ballasts for that cheap tho.
I guess starting my own hydro store sometime in the near future would be a good plan then huh.

And Ty13 I have a 2 ton minisplit gettin ordered in a few days. Hey so does anyone kno where I can get a good price on those the best I've found so far is a 24000 btu + heat minisplit for 1069. Including free shipping . And my plans for controlling odor was the big can lite filter with a 12 " fan exhausting all the stinky hit air creating negative pressure on the room . Do you guys think it would be more effective jus to have the filter and fan in the room scrubbing 24/7.

Ok well heres a few pics
 

Attachments

Turm

Active Member
Looks great man, your at the level I want to be at someday soon lol
Def will be following this thread, good luck.
 

Sencha

Active Member
Dimmable ballasts? I'd put 600 watt bulbs in there if you do. Seriously, you are barely getting a 3.5' foot print with that reflector. I know, I have two of them. Blockbusters offer a true 4x4 foot print for around $160. Just run 600s and save on the power bill till.
 

thousanaire

Active Member
Already got the 1000 watt bulbs for like 40 bucks each bulb. Yea well I wasn't looking forward to the big power bill so I might actually try that.
I really wanted to get a light meter so I can really see the footprint I'm getting and my hyydro store is really cool they said if I wanna upgrade and change to better reflectors later they'll give me store credit for the lumenaires so i plan on gettin one of a few different types of reflectors and putting them to the light meter test. Hopefully after I'm done gettin all these supplies from home depot ill have a lil avaible credit to play with and grab the test. Just spent 327 @home depot today
 

thousanaire

Active Member
Anytime AC is involved its usually better to seal the room and scrub in there.

Yea that's Wat I was thinking too so we have already done the insulation how sealed do you think the room will be jus after putting up the poly plastic and taping all the edges. I haven't even insulated n sealed the garage door or put a layer of plastic over it and the ppm already noticably increases when I'm in there breathing for a while. The doors already all caulked and I sealed the window and insulated the roof with foam boards and spray foam.
 

thousanaire

Active Member
Dimmable ballasts? I'd put 600 watt bulbs in there if you do. Seriously, you are barely getting a 3.5' foot print with that reflector. I know, I have two of them. Blockbusters offer a true 4x4 foot print for around $160. Just run 600s and save on the power bill till.

Yea I heard the blockbuster and yield master 2s were good but that's twice as expensive and couldn't afford six right away so for now is rather have twice as many hoods that arnt as great but to be honest the craftmanship looks pretty good so far and the seal is really nice on it.
 

supchaka

Well-Known Member
Yea that's Wat I was thinking too so we have already done the insulation how sealed do you think the room will be jus after putting up the poly plastic and taping all the edges. I haven't even insulated n sealed the garage door or put a layer of plastic over it and the ppm already noticably increases when I'm in there breathing for a while. The doors already all caulked and I sealed the window and insulated the roof with foam boards and spray foam.
Its not really so much that its sealed tight, just that there isnt a fan bringing air in or out. If I were in that setup Id probably pull air from inside the house through a duct into the lights and exhaust that outside or into the attic or whatever. So its a sealed room yet you're using external air to cool the lights, it would make keeping temps in the garage easier/cheaper.
 

thousanaire

Active Member
Ok so i just got the green thumb up from my buddy the guy who used to run cannacademy and he said that since it is going to be the cold months coming up that we shud be able to get by doing a open system for the next harvest or two so where gunna save the money on the ac for now and then we are going to just run it with the exhaust cranked up. im hooking up seperate intakes for the lights tonite and then gonna hook everything up tomorow night and see what the temps are looking like.
 

thousanaire

Active Member
k guys havent been here for a min but ive been busy cooking in the kitchen as they say lol

first pic is a pic of some homemade smoked bacon the chef made at my restauraunt

IMAG0157.jpg
IMAG0158.jpg
IMAG0160.jpg
IMAG0159.jpg
IMAG0167.jpgIMAG0170.jpgIMAG0175.jpg
 

Attachments

Gibb

Member
Damn man, I can't believe someone would sell light timers for nearly $50 a pop. I think hydro stores rip people off, but that's just nuts. Also, if you ordered online, you'd get a huge discount AND you wouldn't have to pay taxes.
 

thousanaire

Active Member
Looks like your gonna have a niec harvest day! Very Nice photos, what grow system you using in there? the last post i can see what look likes a multicult 2 meter frame? What do you think of this systems? ive been using there 1meter kit for a few years now an i love it! Possibly going to get a 2 meter jobby got my 1m direct from ebay think there website is www.multicult-hydroponics.co.uk

good luck :)

Yea that system looks pretty nice I'm sure you could always build one urself like I did theres plans for the smaller nft systems search stinkbud

I do really like how it says that it has seperate resivors that's cool so u could do differnet flushs And nutes strengths
 

Clown Baby

Well-Known Member
Hey i know you got two 99 plant scripts but you should def still keep the total count under 100. Once its over 100 you go federal regardless of what your card says.

I dont want to read about you in the mercury news
 
Top