1337hacker
Active Member
Hey guys gonna be upgrading my grow room here for the summer / long haul and want some advice on what to do. Maybe you guys can help me out.. I want this room to be completely hands off other than the waterings / trimmings that will need to be done on a regular basis. I am also trying to price it out. I am willing to go the extra mile to make sure I don't have to stress about room conditions at all, and to insure maximum yields.
First off, A/C costs are a premium here in the summer (110+ regularly) , so I need to convert to a sealed room environment. The room I am working with is roughly 11x11x8:
3-4k of hps / mh (haven't decided completely yet.. already have the equipment for 3k)
18k - 24k of Ductless minisplit - (need to buy and install) 1200 ish
Co2 (already have the tank / regulator) **** Need some sort of controller to maintain ppms at a constant level
Humid / dehumid *** need some sort of controller to maintain humidity at roughly 45 %
drain / water supply for humid / dehumid *whats the best thing to do here?
First off... these minisplits probably don't work with environmental controllers such as the chhc-4, or am I mistaken? If so I would probably just pick up one of those and plug everything (minisplit, humidifier, co2) right into that and call it a day. I am not able to get any good info on this so far tho.
If that doesn't workout however, I will probably have to just lean on the thermostat of the Minisplit, combined with an independent humidistat/ co2 controller...?
Am I getting this right? What would you guys do?
First off, A/C costs are a premium here in the summer (110+ regularly) , so I need to convert to a sealed room environment. The room I am working with is roughly 11x11x8:
3-4k of hps / mh (haven't decided completely yet.. already have the equipment for 3k)
18k - 24k of Ductless minisplit - (need to buy and install) 1200 ish
Co2 (already have the tank / regulator) **** Need some sort of controller to maintain ppms at a constant level
Humid / dehumid *** need some sort of controller to maintain humidity at roughly 45 %
drain / water supply for humid / dehumid *whats the best thing to do here?
First off... these minisplits probably don't work with environmental controllers such as the chhc-4, or am I mistaken? If so I would probably just pick up one of those and plug everything (minisplit, humidifier, co2) right into that and call it a day. I am not able to get any good info on this so far tho.
If that doesn't workout however, I will probably have to just lean on the thermostat of the Minisplit, combined with an independent humidistat/ co2 controller...?
Am I getting this right? What would you guys do?