growjahherb
Well-Known Member
hey 007. Do you really think my bill will go up 100 dollars a month?!?!
ventilation for my closet and yours.
- Thread starter growjahherb
- Start date
growjahherb
Well-Known Member
oh and for the fan, should i cut a hole at the base of the door to fit the fan and some tubing? Wouldn't i need 2 holes for the exhaust fan and the intake fan?
growjahherb
Well-Known Member
do you think i would be ok with just opening the door a few times a day?
el1
Well-Known Member
opening the door once or twice a day is not going to cut it mate , even with a 400w the temps will be above 85 , with a 600w i guess its be worse , the plants not only prefer a stable temp around 27 , but they like fresh air not stale , so you need to be circulating it ,
read these forums youll find loads about ventilation. You could use just one exhaust fan and a passive intake ( hole with no fan) negative pressure created by the exhaust will suck air in. A fan inside is needed to strenghten stems and keep plants cool.
Hope i helped.
read these forums youll find loads about ventilation. You could use just one exhaust fan and a passive intake ( hole with no fan) negative pressure created by the exhaust will suck air in. A fan inside is needed to strenghten stems and keep plants cool.
Hope i helped.
mattso101
Well-Known Member
Cut a hole in the wall like I did put the exhust tube in and seal all around. I have mine venting through my washroom exhust fan that goes outside. But you could get away with just pushing the air through the wall . you wont reall need an intake cause the air will suck through all the tine holes and cracks in your closet
mattso101
Well-Known Member
https://www.rollitup.org/grow-journals/16203-narpal-round-2-done-right-2.html
Check this page in my last journal, it should help explane my venting set up
Check this page in my last journal, it should help explane my venting set up
philli007
Active Member
Growjahherb,
Oh yeah dude, it's gonna go up atleast a $100.00 a month once you are all set up. And you will need to do an exhaust cut from the top and the intake from the bottom.
El1 is right, just opening a door won't nearly do it for the plants. You could save money and have less heat if you use CFLs (compact florescent light bulbs), but I only use them for vegging so; I cant help you there.
Hey I got another link for you too. It shows how to set things up for using a 400w light in a closet. Check it out New Page 1
Later
P007
growjahherb
Well-Known Member
damn you guys are amazing. Thank you so much. It is so fucking ridiculous that a plant is illegal. Fuck that. I really wish i could do something about it. I just watched stoned guide to growing cannabis and it was amazing and very informing. I am moving into an apt. building where my dad lives. I am not going to live in the same apt. (accross the hall) He is cool as shit and always "stocks up" when i come, but i don't think he thinks its too smart to grow. I asked him the other day what the bill will be per month and he said around 20 bucks. I am going to be going to college and working a part time job so 100 bucks seems like a lot(at least i have my best friend as my room mate to help pay). It seems crazy that the bill would go up 80 bucks! I believe it though if you guys are sayin it. So 100 bucks does not look suspicious in a building where most peoples bill is 20-30$? mattso i am going to read through your grow journal; Ill tell you what i think when i am done. El1 i think ill have an intake and a hole because i am trying to save money. My main problem will be money. I am not about to start a cheap grow though. When i do shit(especially this type of shit) i do it right.
thanks
smoke the herb for the rest of your lives
smokebigbudz
Active Member
Get some flexible dryer ducting and run it to a inline fan, drop the ducting down between your lights and that way you can vent hot air, keep other fans pumping in new air from the outside, good luck.
el1
Well-Known Member
i dont know about 100 dollars a month!! I run a 400w and does about 30 aus a month on top so you should be ok unless ure running multiple setups which i dont think u are.
also check this link for a really cheap ass way to make a carbon filter.It works , just not so pretty , also u probally wanna put more holes in then this guy but thats my opinion.
also check this link for a really cheap ass way to make a carbon filter.It works , just not so pretty , also u probally wanna put more holes in then this guy but thats my opinion.
growjahherb
Well-Known Member
should i make a whole in the wall. Is there any way of not doing that because i live in an apt. and that seems fucked up to do to the landlord.
growjahherb
Well-Known Member
el1
Well-Known Member
growjahherb
Well-Known Member
I loved your grow journal man. Your pictures are amazing and your plants are the real deal. I learned a lot from it but i still hope i can create proper air flow/ventilation without cutting a hole in my landlords wall! We will see
thanks man a lot of help. Really.
el1
Well-Known Member
the guy makiing it is a bit of a retard so ill elaborate on how i made my similar one.
once youve done what hes done ( i used a container with a bottom and drill heaps of holes in it rather than have a giant hole like his)
and filled it up with carbon , then you can stuff the other end with some more cotton fluffy crap.
then u get some ducting and some aluminium tape and tape the ducting over the open end ( opposite end of screws)
then attach other end to your exhaust fan and there you go,
not exactly pro level but it does its job .
once youve done what hes done ( i used a container with a bottom and drill heaps of holes in it rather than have a giant hole like his)
and filled it up with carbon , then you can stuff the other end with some more cotton fluffy crap.
then u get some ducting and some aluminium tape and tape the ducting over the open end ( opposite end of screws)
then attach other end to your exhaust fan and there you go,
not exactly pro level but it does its job .
shamegame
Well-Known Member
bathroom fans will make some noise. Sometimes more, sometimes less. They whistle and the noise cuts through doors. I bought one, and don't use it really. I use a box fan and a small fan and that's it. I leave both closet doors cracked - I don't want to run ducting into my attic through my ceiling. It works, but is ghetto. I am going to build a large cabinet instead of growing in my closet next winter. My yearly outdoor harvest is what I focus on most anyway.
I am thinking 6.5'Hx4'Wx2'D. That would give me room for a floro veg/clone chamber.
I am thinking 6.5'Hx4'Wx2'D. That would give me room for a floro veg/clone chamber.
dictate101
Active Member
I have a huge question about this whole situation. I have my grow room setup. I just recieved my 4in inline 171cm fan and carbon filter for $150 from HTG today. How the hell do i set this up lol? I have a 400w hps/mh light with a cooltube. Im guessing take the 4in ducting i bought put it from the cooltube directly into the inline fan exhausing air out. Does the other side of the vent goto the carbon filter? So it would be taking heat directly from the light through the fan through the vent out into the carbon filter? should i have the filter outside or inside the grow room? use it as a scrubber? my inline fan will replace the air in my hydro hut in 5 mins. How many time a day should i do this ? to keep the ait fresh? I then have a small oscilating fan inside the tent . And then i have a regular high powered fan going from the window directly into the hut. IM just confused on how this carbon filter works.... do i attach the 4in ducting to the collar of it? and wehre do i put the filter lol? Please help 