Simplicity
Member
So i ordered:
* High air flow for maximum cooling performance.
* Quiet operation with low RPM.
* RoHS compliance for protecting the environment.
* Compatible with Cosmos S, ATCS 840, HAF 932, HAF 922* and Storm Sniper* (*No LED On/Off function support).
* Adds extra cooling for graphics cards when installed on side panels.
Specifications
Dimension (W / H / D) 200 x 200 x 30 mm
Speed (R.P.M.) 700 RPM
Air Flow (CFM) 110 CFM
Air pressure (mmH2O) 0.595 mm H2O
Noise 19 dBA
Bearing Type Sleeve Bearing
Fan Life Expectancy 30,000 Hours
Rated Voltage 12 VDC
Current (Ampere) 0.16 A (Max 0.28 A)
Power consumption 3.36 W
Weight 266
For my 6x2.5x1.5 grow space 6 being height
I went with this vent because noise is a problem and this fan is rated at 19db with a 110cfm airflow because the fan is bigger and it actually does less RPM which makes less noise but moves same amout of air as if a 2x smaller fan with same cfm would be 2x or even more louder which is a huge problem to me, so my main question is about the passive intake, i know that basicly the passive intake hole should be 2x the size of the exhaust, but the big fan i went with is 20cm x 20 cm thats about 8 inches? anyways if i cut a 40cm x 40cm hole and a 20cm x 20cm hole in my wardrobe
i`ll basicly strip almost the entire back side of it lol what would happen if my passive intake is the same size as the exhaust? im stoned sorry
* High air flow for maximum cooling performance.
* Quiet operation with low RPM.
* RoHS compliance for protecting the environment.
* Compatible with Cosmos S, ATCS 840, HAF 932, HAF 922* and Storm Sniper* (*No LED On/Off function support).
* Adds extra cooling for graphics cards when installed on side panels.
Specifications
Dimension (W / H / D) 200 x 200 x 30 mm
Speed (R.P.M.) 700 RPM
Air Flow (CFM) 110 CFM
Air pressure (mmH2O) 0.595 mm H2O
Noise 19 dBA
Bearing Type Sleeve Bearing
Fan Life Expectancy 30,000 Hours
Rated Voltage 12 VDC
Current (Ampere) 0.16 A (Max 0.28 A)
Power consumption 3.36 W
Weight 266
For my 6x2.5x1.5 grow space 6 being height
I went with this vent because noise is a problem and this fan is rated at 19db with a 110cfm airflow because the fan is bigger and it actually does less RPM which makes less noise but moves same amout of air as if a 2x smaller fan with same cfm would be 2x or even more louder which is a huge problem to me, so my main question is about the passive intake, i know that basicly the passive intake hole should be 2x the size of the exhaust, but the big fan i went with is 20cm x 20 cm thats about 8 inches? anyways if i cut a 40cm x 40cm hole and a 20cm x 20cm hole in my wardrobe
i`ll basicly strip almost the entire back side of it lol what would happen if my passive intake is the same size as the exhaust? im stoned sorry